TALK=T;RUN( 1, 1)
 
 ************************************************************
   Q1 created by VDI menu, Version 2020, Date 16/06/20
 CPVNAM=VDI; SPPNAM=Core
 ************************************************************
  Echo DISPLAY / USE settings
  DISPLAY
   Library case 660
 
   The case shows an angled_in and an angled_out object
   surrounding a cylinder. The angled_in object is set
   to give an inlet velocity of 5 m/s normal to the
   cylinder surface.
 
   To see the related tutorial, click
   here.
 
   In the Viewer, press F3 to run the macro from the Q1.
   (To stop the animation, click the Streamline Management
   icon, then Animate -> Stop animation)
  enddis
  VRV USE
  PROBE  5.000000E-01  2.500000E-02  4.750000E-01
  VIEW -8.199605E-01  5.404742E-01  1.885531E-01
  UP  1.591368E-01 -1.011780E-01  9.820584E-01
  VIEW CENTRE  5.000000E-01  5.000000E-01  5.000000E-01
  VIEW SIZE  9.084761E-01
  VIEW DEPTH  1.048260E+03;VIEW TILT 0.0
  SLICE X
  VARIABLE  Velocity
  VECTOR ON
  CONTOUR ON
  STREAM CLEAR
  STREAM ANIMATE OFF
  PAUSE
  * Start of frame
  PROBE  5.000000E-01  5.000000E-01  1.500000E-01
  SLICE Z
  VIEW -9.228242E-01  1.318101E-01  3.619689E-01
  UP  3.580332E-01 -5.326634E-02  9.321876E-01
  VIEW SIZE  9.357304E-01
  VECTOR OFF
  VECTOR SCALE  1.070200E-02
  CONTOUR OFF
  STREAM CLEAR
  STREAM ANIMATE OFF
  STREAM COLOUR Total
  STREAM TIME -1.000000E+10 1.000000E+10
  STREAM DIRECTION Both
  STREAM ORIGIN Probe
  STREAM MODE Line
  STREAM  5.000000E-01  6.250000E-01  1.500000E-01
  STREAM  5.310863E-01  6.210729E-01  1.500000E-01
  STREAM  5.602192E-01  6.095383E-01  1.500000E-01
  STREAM  5.855684E-01  5.911211E-01  1.500000E-01
  STREAM  6.055410E-01  5.669783E-01  1.500000E-01
  STREAM  6.188821E-01  5.386271E-01  1.500000E-01
  STREAM  6.247534E-01  5.078488E-01  1.500000E-01
  STREAM  6.227859E-01  4.765773E-01  1.500000E-01
  STREAM  6.131034E-01  4.467776E-01  1.500000E-01
  STREAM  5.963141E-01  4.203220E-01  1.500000E-01
  STREAM  5.734731E-01  3.988729E-01  1.500000E-01
  STREAM  5.460155E-01  3.837779E-01  1.500000E-01
  STREAM  5.156666E-01  3.759857E-01  1.500000E-01
  STREAM  4.843333E-01  3.759857E-01  1.500000E-01
  STREAM  4.539843E-01  3.837780E-01  1.500000E-01
  STREAM  4.265268E-01  3.988729E-01  1.500000E-01
  STREAM  4.036858E-01  4.203221E-01  1.500000E-01
  STREAM  3.868966E-01  4.467777E-01  1.500000E-01
  STREAM  3.772141E-01  4.765774E-01  1.500000E-01
  STREAM  3.752467E-01  5.078489E-01  1.500000E-01
  STREAM  3.811180E-01  5.386273E-01  1.500000E-01
  STREAM  3.944591E-01  5.669785E-01  1.500000E-01
  STREAM  4.144317E-01  5.911212E-01  1.500000E-01
  STREAM  4.397810E-01  6.095384E-01  1.500000E-01
  STREAM  4.689139E-01  6.210729E-01  1.500000E-01
  STREAM ANIM BALL
  BALLSIZE 7.500000E-03
  STREAM FREQUENCY   100    10
  STREAM VISIBILITY ON
  ENDUSE
 ************************************************************
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 1. Run Title
 TEXT(Inlet flow normal to cylinder surface   )
 ************************************************************
  Group 2. Transience
 STEADY = T
 ************************************************************
  Groups 3, 4, 5  Grid Information
    * Overall number of cells, RSET(M,NX,NY,NZ,tolerance)
 RSET(M,32,32,30)
 ************************************************************
  Group 6. Body-Fitted coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
    * Non-default variable names
 NAME(146)=PRPS ;NAME(147)=EPKE
 NAME(148)=DEN1 ;NAME(149)=EL1
 NAME(150) =ENUT
    * Solved variables list
 SOLVE(P1,U1,V1,W1)
    * Stored variables list
 STORE(ENUT,EL1,DEN1,EPKE,PRPS)
    * Additional solver options
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 TURMOD(KECHEN)
 
 ************************************************************
  Group 8. Terms & Devices
 ************************************************************
  Group 9. Properties
 PRESS0 =1.01325E+05 ;TEMP0 =273.149994
    * Domain material index is   0 signifying:
    * Air at 20 deg C, 1 atm, treated as incompressible
 SETPRPS(1, 0)
 DVO1DT =3.41E-03
 PRT(KE)=0.75 ;PRT(EP)=1.15
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initialise Var/Porosity Fields
 FIINIT(P1)=0. ;FIINIT(PRPS)=-1.
   No PATCHes used for this Group
 
 
 INIADD = F
 ************************************************************
  Group 12. Convection and diffusion adjustments
   No PATCHes used for this Group
 ************************************************************
  Group 13. Boundary & Special Sources
   No PATCHes used for this Group
 
 EGWF = T
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 400
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=200 ;LITER(KE)=10
 LITER(EP)=10
 ************************************************************
  Group 17. Relaxation
 RELAX(P1 ,LINRLX,0.5 )
 RELAX(U1 ,LINRLX,0.5 )
 RELAX(V1 ,LINRLX,0.5 )
 RELAX(W1 ,LINRLX,0.5 )
 RELAX(KE ,LINRLX,0.5 )
 RELAX(EP ,LINRLX,0.5 )
 KELIN = 3
 ************************************************************
  Group 18. Limits
 ************************************************************
  Group 19. EARTH Calls To GROUND Station
 GENK = T
 PARSOL = F
 CONWIZ = T
 IENUTA = 2
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=6.601 ;EX(U1)=0.4388
 EX(V1)=0.4388 ;EX(W1)=0.55
 EX(KE)=0.08213 ;EX(EP)=0.462
 EX(PRPS)=0.9615 ;EX(EPKE)=4.547
 EX(DEN1)=1.143 ;EX(EL1)=0.01283
 EX(ENUT)=2.067E-03
 ************************************************************
  Group 21. Print-out of Variables
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 9 ;IYMON = 9 ;IZMON = 15
 NPRMON = 100000
 NPRMNT = 1
 TSTSWP = -1
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000
 ISWPRF = 1 ;ISWPRL = 100000
   No PATCHes used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 
 GVIEW(P,0.099682,-0.868487,0.485586)
 GVIEW(UP,-0.050322,0.482992,0.874178)
 GVIEW(VDIS,0.760834)
 GVIEW(CENTRE,0.487209,0.481867,0.472484)
 
> DOM,    SIZE,        1.000000E+00, 1.000000E+00, 1.000000E+00
> DOM,    MONIT,       3.055699E-01, 3.055699E-01, 4.719902E-01
> DOM,    SCALE,       1.000000E+00, 1.000000E+00, 1.000000E+00
> GRID,   AUTO,         T T T
> GRID,   MINCELL,     0.02 ,0.02 ,0.02
  > GRID,   RSET_X_1,    -10, 1.100000E+00,G
  > GRID,   RSET_X_2,     -2, 1.100000E+00,G
  > GRID,   RSET_X_3,     -8, 1.100000E+00,G
  > GRID,   RSET_X_4,     -2, 1.100000E+00,G
  > GRID,   RSET_X_5,    -10, 1.100000E+00,G
  > GRID,   RSET_Y_1,    -10, 1.100000E+00,G
  > GRID,   RSET_Y_2,     -2, 1.100000E+00,G
  > GRID,   RSET_Y_3,     -8, 1.100000E+00,G
  > GRID,   RSET_Y_4,     -2, 1.100000E+00,G
  > GRID,   RSET_Y_5,    -10, 1.100000E+00,G
  > GRID,   RSET_Z_1,     -4, 1.100000E+00,G
  > GRID,   RSET_Z_2,     -4, 1.100000E+00,G
  > GRID,   RSET_Z_3,    -14, 1.100000E+00,G
  > GRID,   RSET_Z_4,     -4, 1.100000E+00,G
  > GRID,   RSET_Z_5,     -4, 1.100000E+00,G
> DOM,    INI_AMB,    YES
> DOM,    INI_BUOY,   YES
 
> OBJ,    NAME,        DOM_XMIN_W
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        0.000000E+00, TO_END,       TO_END
> OBJ,    DOMCLIP,     NO
> OBJ,    GEOMETRY,    box
> OBJ,    VISIBLE,     NO
> OBJ,    TYPE,        PLATE
 
> OBJ,    NAME,        DOM_XMAX_W
> OBJ,    POSITION,    AT_END,       0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        0.000000E+00, TO_END,       TO_END
> OBJ,    DOMCLIP,     NO
> OBJ,    GEOMETRY,    box
> OBJ,    VISIBLE,     NO
> OBJ,    TYPE,        PLATE
 
> OBJ,    NAME,        DOM_YMIN_W
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        TO_END,       0.000000E+00, TO_END
> OBJ,    DOMCLIP,     NO
> OBJ,    GEOMETRY,    box
> OBJ,    VISIBLE,     NO
> OBJ,    TYPE,        PLATE
 
> OBJ,    NAME,        DOM_YMAX_W
> OBJ,    POSITION,    0.000000E+00, AT_END,       0.000000E+00
> OBJ,    SIZE,        TO_END,       0.000000E+00, TO_END
> OBJ,    DOMCLIP,     NO
> OBJ,    GEOMETRY,    box
> OBJ,    VISIBLE,     NO
> OBJ,    TYPE,        PLATE
 
> OBJ,    NAME,        DOM_ZMIN_W
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        TO_END,       TO_END,       0.000000E+00
> OBJ,    DOMCLIP,     NO
> OBJ,    GEOMETRY,    box
> OBJ,    VISIBLE,     NO
> OBJ,    TYPE,        PLATE
 
> OBJ,    NAME,        DOM_ZMAX_W
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, AT_END
> OBJ,    SIZE,        TO_END,       TO_END,       0.000000E+00
> OBJ,    DOMCLIP,     NO
> OBJ,    GEOMETRY,    box
> OBJ,    VISIBLE,     NO
> OBJ,    TYPE,        PLATE
 
> OBJ,    NAME,        COLUMN
> OBJ,    POS-CEN,     5.000000E-01, 5.000000E-01, 5.000000E-01
> OBJ,    SIZE,        2.000000E-01, 2.000000E-01, 1.000000E+00
> OBJ,    GEOMETRY,    cylinder
> OBJ,    TYPE,        BLOCKAGE
> OBJ,    MATERIAL,    198,Solid with smooth-wall friction
 
> OBJ,    NAME,        INLET
> OBJ,    POS-CEN,     5.000000E-01, 5.000000E-01, 1.500000E-01
> OBJ,    SIZE,        3.000000E-01, 3.000000E-01, 1.000000E-01
> OBJ,    GEOMETRY,    cylinder
> OBJ,    TYPE,        ANGLED-IN
> OBJ,    PRESSURE,     P_AMBIENT
> OBJ,    NORMAL_VEL,  5.
> OBJ,    TURB-INTENS, 5.
 
> OBJ,    NAME,        OUTLET
> OBJ,    POS-CEN,     5.000000E-01, 5.000000E-01, 8.500000E-01
> OBJ,    SIZE,        3.000000E-01, 3.000000E-01, 1.000000E-01
> OBJ,    GEOMETRY,    cylinder
> OBJ,    TYPE,        ANGLED-OUT
> OBJ,    PRESSURE,     P_AMBIENT
> OBJ,    COEFFICIENT, 1000.
> OBJ,    TURBULENCE,  SAME , SAME
STOP