rem
rem Preliminary note. If this file has been given the extension .htm for
rem documentation purposes, it must be renamed to scr.bat to enable it
rem to act as a batch file
rem file scr.bat which performs a series of 4 runs on
rem grids of successivel increasing fineness
rem followed by a fifth start-from-scratch run and a
rem sixth which restarts with the grid and from the phi file
rem of run 4. so as to procure a better converged result
set sweeps=5
mkdir %sweeps%sweep
echo lsweep=%sweeps% >log
rem initialization of files included in the q1
echo no action >spinxyz1
echo Text(run1 coarsest grid >q2
rem perform the first coarse-grid run
call se
echo run 1 complete>>log
copy result res1
copy phi phi1
copy gxmoni.gif gxmoni1.gif
rem write q1spin
echo refine(x,2) >q1spin
echo refine(y,2) >>q1spin
echo refine(z,2) >>q1spin
echo do not interpolate p1 >>q1spin
echo do not interpolate u1 >>q1spin
echo do not terpolate v1 >>q1spin
echo do not interpolate w1 >>q1spin
echo stop >>q1spin
echo q1spin created >>log
rem Call SPINTO so as to create nphi, i.e. the phi from which the
rem next run will start and to place in spinxyz1 the nx, ny and nz
rem which are to be used.
rem Activate 'goto end', by removing the 'rem' in front of it,
rem if it is desired to terminate at this stage
rem goto end
rem Make the second-stage run, save, call SPINTO, etc
echo Text(run 2, 1st refinement >>q2
echo lsweep=%sweeps% >>q2
echo restrt(all) >>q2
echo namfi=nphi >>q2
echo runspin about to be called >>log
call runspin
echo runspin has been called >>log
copy nphi nphi2
call se
echo run 2 complete>>log
copy result %sweeps%sweep\res2
copy phi %sweeps%sweep\phi2
copy gxmoni.gif %sweeps%sweep\gxmoni2.gif
rem Make the third-stage run, save, call SPINTO, etc
echo Text(run3, 2nd refinement >>q2
echo restrt(all) >>q2
echo namfi=nphi >>q2
call runspin
copy nphi %sweeps%sweep\nphi3
call se
echo run 3 complete>>log
copy result %sweeps%sweep\res3
copy phi %sweeps%sweep\phi3
copy gxmoni.gif %sweeps%sweep\gxmoni3.gif
rem Make the fourth-stage run, save, call SPINTO, etc
echo Text(run4, 3rd refinement >>q2
echo restrt(all) >>q2
echo namfi=nphi >>q2
call runspin
copy nph1 %sweeps%sweep\nphi4
call se
echo run 4 complete>>log
copy result res4
copy phi %sweeps%sweep\phi4
copy gxmoni.gif %sweeps%sweep\gxmoni4.gif
rem Run 5 finest grid, without restart
echo Text(Run 5 no restart >Q2
echo lsweep=%sweeps% >>q2
call se
echo run 5 complete>>log
copy result%sweeps%sweep\ res5
copy phi %sweeps%sweep\phi5
copy gxmoni.gif %sweeps%sweep\gxmoni5.gif
rem Run 6 finest grid, restart from 5
echo Text(Run 6 restart from 5 >>Q2
echo restrt(all) >>Q2
call se
echo run 6 complete>>log
copy result %sweeps%sweep\res6
copy phi %sweeps%sweep\phi6
copy gxmoni.gif %sweeps%sweep\gxmoni6.gif
rem Run 7 finest grid, restart from 4
echo Text(Run 7 restart from 4 >>Q2
echo restrt(all) >>Q2
echo namfi=%sweeps%sweep\phi4 >>Q2
call se
echo run 7 complete>>log
copy result %sweeps%sweep\res7
copy phi %sweeps%sweep\phi7
copy gxmoni.gif %sweeps%sweep\gxmoni7.gif
goto end
:end