************************************************************
Q1 created by VDI menu, Version 3.2, Date 06/01/99
CPVNAM=VDI;SPPNAM=Core
************************************************************
IRUNN = 1 ;LIBREF = 401
************************************************************
Group 1. Run Title
TEXT(Simulation Of A Labyrinth Flow
************************************************************
Group 2. Transience
STEADY = T
************************************************************
Groups 3, 4, 5 Grid Information
* Overall number of cells, RSET(M,NX,NY,NZ,tolerance)
RSET(M,20,1,15)
* Set overall domain extent:
* xulast yvlast zwlast
name
XSI= 2.000000E+00; YSI= 1.000000E+00; ZSI= 1.000000E+00
RSET(D,CHAM )
* Set objects: x0 y0 z0
* dx dy dz
name
XPO= 0.000000E+00; YPO= 0.000000E+00; ZPO= 9.500000E-01
XSI= 2.000000E+00; YSI= 1.000000E+00; ZSI= 5.000000E-02
RSET(B,WALL-H )
XPO= 0.000000E+00; YPO= 0.000000E+00; ZPO= 0.000000E+00
XSI= 2.000000E+00; YSI= 1.000000E+00; ZSI= 5.000000E-02
RSET(B,WALL-L )
XPO= 2.000000E+00; YPO= 0.000000E+00; ZPO= 5.000000E-01
XSI= 0.000000E+00; YSI= 1.000000E+00; ZSI= 5.000000E-01
RSET(B,WALL-E )
XPO= 0.000000E+00; YPO= 0.000000E+00; ZPO= 0.000000E+00
XSI= 0.000000E+00; YSI= 1.000000E+00; ZSI= 5.000000E-01
RSET(B,WALL-W )
XPO= 5.000000E-01; YPO= 0.000000E+00; ZPO= 3.000000E-01
XSI= 0.000000E+00; YSI= 1.000000E+00; ZSI= 6.500000E-01
RSET(B,IN-PLATE)
XPO= 1.000000E+00; YPO= 0.000000E+00; ZPO= 5.000000E-02
XSI= 4.000000E-01; YSI= 1.000000E+00; ZSI= 6.500000E-01
RSET(B,IN-BLOCK)
XPO= 0.000000E+00; YPO= 0.000000E+00; ZPO= 5.000000E-01
XSI= 0.000000E+00; YSI= 1.000000E+00; ZSI= 4.500000E-01
RSET(B,INLET )
XPO= 2.000000E+00; YPO= 0.000000E+00; ZPO= 5.000000E-02
XSI= 0.000000E+00; YSI= 1.000000E+00; ZSI= 4.500000E-01
RSET(B,OUTLET )
************************************************************
Group 6. Body-Fitted coordinates
* X-cyclic boundaries switched
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(150) =TEM1
SOLVE(P1 ,U1 ,W1 ,TEM1)
* Additional solver options
SOLUTN(P1 ,Y,Y,Y,N,N,Y)
SOLUTN(TEM1,Y,Y,Y,N,N,Y)
************************************************************
Group 8. Terms & Devices
TERMS (TEM1,Y,Y,Y,Y,Y,Y)
************************************************************
Group 9. Properties
SETPRPS(1, 0)
RHO1 = 1.189E+00
PRESS0 = 1.000E+05
TEMP0 = 2.730E+02
CP1 = 1.005E+03
ENUL = 1.544E-05 ;ENUT = 0.000E+00
DVO1DT = 3.410E-03
PRNDTL(TEM1) = -2.580E-02
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initialise Var/Porosity Fields
No PATCHes used for this Group
INIADD = F
************************************************************
Group 12. Convection and diffusion adjustments
No PATCHes used for this Group
************************************************************
Group 13. Boundary & Special Sources
No PATCHes used for this Group
EGWF = T
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 200
RESFAC = 1.000E-03
************************************************************
Group 16. Terminate Iterations
************************************************************
Group 17. Relaxation
RELAX(P1 ,LINRLX, 1.000000E+00)
************************************************************
Group 18. Limits
VARMAX(U1 ) = 1.000000E+06 ;VARMIN(U1 ) =-1.000000E+06
VARMAX(W1 ) = 1.000000E+06 ;VARMIN(W1 ) =-1.000000E+06
************************************************************
Group 19. EARTH Calls To GROUND Station
ASAP = T
************************************************************
Group 20. Preliminary Printout
ECHO = T
************************************************************
Group 21. Print-out of Variables
OUTPUT(P1 ,Y,Y,Y,N,Y,Y)
OUTPUT(U1 ,Y,Y,Y,N,Y,Y)
OUTPUT(W1 ,Y,Y,Y,N,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 8 ;IYMON = 1 ;IZMON = 8
NPRMNT = 1
TSTSWP = -1
************************************************************
Group 23.Field Print-Out & Plot Control
No PATCHes used for this Group
************************************************************
Group 24. Dumps For Restarts
NOWIPE = T
GVIEW(P,0.000000E+00,-1.000000E+00,0.000000E+00)
GVIEW(UP,0.000000E+00,0.000000E+00,1.000000E+00)
> DOM, SIZE, 2.000000E+00, 1.000000E+00, 1.000000E+00
> DOM, MONIT, 7.500000E-01, 5.000000E-01, 4.666670E-01
> DOM, SCALE, 1.000000E+00, 1.000000E+00, 1.000000E+00
> DOM, SNAPSIZE, 1.000000E-02
> DOM, RELAX, 5.000000E-01
> OBJ1, NAME, WALL-H
> OBJ1, POSITION, 0.000000E+00, 0.000000E+00, 9.500000E-01
> OBJ1, SIZE, 2.000000E+00, 1.000000E+00, 5.000000E-02
> OBJ1, CLIPART, cube14
> OBJ1, ROTATION, 1
> OBJ1, TYPE, BLOCKAGE
> OBJ1, MATERIAL, 100
> OBJ1, ADIABATIC, 0.000000E+00, 0.000000E+00
> OBJ2, NAME, WALL-L
> OBJ2, POSITION, 0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ2, SIZE, 2.000000E+00, 1.000000E+00, 5.000000E-02
> OBJ2, CLIPART, cube4
> OBJ2, ROTATION, 1
> OBJ2, TYPE, BLOCKAGE
> OBJ2, MATERIAL, 100
> OBJ2, HEAT_FLUX, 0.000000E+00, 1.000000E+02
> OBJ3, NAME, WALL-E
> OBJ3, POSITION, 2.000000E+00, 0.000000E+00, 5.000000E-01
> OBJ3, SIZE, 0.000000E+00, 1.000000E+00, 5.000000E-01
> OBJ3, CLIPART, cube11
> OBJ3, ROTATION, 1
> OBJ3, TYPE, PLATE
> OBJ3, ADIABATIC, 0.000000E+00, 0.000000E+00
> OBJ4, NAME, WALL-W
> OBJ4, POSITION, 0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ4, SIZE, 0.000000E+00, 1.000000E+00, 5.000000E-01
> OBJ4, CLIPART, cube11
> OBJ4, ROTATION, 1
> OBJ4, TYPE, PLATE
> OBJ4, ADIABATIC, 0.000000E+00, 0.000000E+00
> OBJ5, NAME, IN-PLATE
> OBJ5, POSITION, 5.000000E-01, 0.000000E+00, 3.000000E-01
> OBJ5, SIZE, 0.000000E+00, 1.000000E+00, 6.500000E-01
> OBJ5, CLIPART, cube11
> OBJ5, ROTATION, 1
> OBJ5, TYPE, PLATE
> OBJ5, POROSITY, 0.000000E+00
> OBJ5, SIDE, BOTH
> OBJ6, NAME, IN-BLOCK
> OBJ6, POSITION, 1.000000E+00, 0.000000E+00, 5.000000E-02
> OBJ6, SIZE, 4.000000E-01, 1.000000E+00, 6.500000E-01
> OBJ6, CLIPART, cube14
> OBJ6, ROTATION, 1
> OBJ6, TYPE, BLOCKAGE
> OBJ6, MATERIAL, 103
> OBJ6, ADIABATIC, 0.000000E+00, 0.000000E+00
> OBJ7, NAME, INLET
> OBJ7, POSITION, 0.000000E+00, 0.000000E+00, 5.000000E-01
> OBJ7, SIZE, 0.000000E+00, 1.000000E+00, 4.500000E-01
> OBJ7, CLIPART, cube3
> OBJ7, ROTATION, 1
> OBJ7, TYPE, INLET
> OBJ7, PRESSURE, 0.000000E+00
> OBJ7, VELOCITY, 5.000000E-02, 0.000000E+00, 0.000000E+00
> OBJ7, TEMPERATURE, 2.000000E+01
> OBJ8, NAME, OUTLET
> OBJ8, POSITION, 2.000000E+00, 0.000000E+00, 5.000000E-02
> OBJ8, SIZE, 0.000000E+00, 1.000000E+00, 4.500000E-01
> OBJ8, CLIPART, cube12
> OBJ8, ROTATION, 1
> OBJ8, TYPE, OUTLET
> OBJ8, PRESSURE, 0.000000E+00
> OBJ8, TEMPERATURE, -1.026000E+04
> OBJ8, COEFFICIENT, 1.000000E+03
M