TALK=T;RUN(1,1)
display
1-D PARSOL HEAT CONDUCTION WITH FIXED-T ON OBJECT
1000 [K] BY INFORM
Ý--------------------Ý\\\\\\Ý---------------------------Ý
AIR AL AIR
x= 0. 0.45 0.65 1.1
BC.T=0.[k] T=0.[K]
Analytical Solution
Heat Flux (out)= 114.67 [W]
-----------------------------------------------------------
ix = 1 2 3 4 5 6
T = 111.1 333.3 555.6 777.8 1000. 1000.
-----------------------------------------------------------
ix = 7 8 9 10 11
T = 1000. 777.8 555.6 333.3 111.1
-----------------------------------------------------------
Note: This case was used to test PARSOL accuracy
enddis
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(PARSOL 1D-X HEAT TRANSFER )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 11
XULAST =1.1
XFRAC(1)=0.090909 ;XFRAC(2)=0.181818
XFRAC(3)=0.272727 ;XFRAC(4)=0.363636
XFRAC(5)=0.454545 ;XFRAC(6)=0.545455
XFRAC(7)=0.636364 ;XFRAC(8)=0.727273
XFRAC(9)=0.818182 ;XFRAC(10)=0.909091
XFRAC(11)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 1
YVLAST =1.
YFRAC(1)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 1
ZWLAST =1.
ZFRAC(1)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(148)=PRPS ;NAME(149)=TEM1
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(TEM1,Y,Y,Y,N,N,Y)
PRPS = 148
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(TEM1,N,Y,Y,Y,N,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1.189 ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =3.41E-03 ;DRH1DP =1.0E-05
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1.544E-05 ;ENUT =0.
PRNDTL(TEM1)=-0.0258
PRT(TEM1)=1.
CP1 =1005. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(PRPS)=-1. ;FIINIT(TEM1)=0.
PATCH(^OB5 ,INIVAL, 5, 0, 0, 0, 0, 0, 1, 1)
INIT(^OB5 ,PRPS,0. ,100. )
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(OB3 ,WWALL , 1, 1, 1, 1, 1, 1, 1, 1)
COVAL(OB3 ,TEM1,1. ,0. )
PATCH(OB4 ,EWALL , 11, 11, 1, 1, 1, 1, 1, 1)
COVAL(OB4 ,TEM1,1. ,0. )
PATCH(^OD5 ,CELL , 5, 18, 0, 0, 0, 0, 1, 1)
COVAL(^OD5 ,TEM1,In-Form:source - see Grp 19)
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 50 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-03
************************************************************
Group 16. Terminate Iterations
LITER(TEM1)=20
ENDIT(TEM1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(PRPS,LINRLX,1.)
RELAX(TEM1,FALSDT,1.0E+07)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,DOMAIN,PHASE_1_MAT,I,0)
SPEDAT(SET,SOURCE,TEM1!B6,C,=1000!FIXV)
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,OBJNAM,!OB3,C,B7)
SPEDAT(SET,OBJTYP,!OB3,C,PLATE)
SPEDAT(SET,OBJNAM,!OB4,C,B8)
SPEDAT(SET,OBJTYP,!OB4,C,PLATE)
SPEDAT(SET,OBJNAM,^OB5,C,B6)
SPEDAT(SET,OBJTYP,^OB5,C,BLOCKAGE)
SPEDAT(SET,B6,MATERIAL,R,100.)
SPEDAT(SET,OBJNAM,^OD5,C,B6)
SPEDAT(SET,OBJTYP,^OD5,C,BLOCKAGE)
SPEDAT(SET,FACETDAT,NUMOBJ,I,5)
SPEDAT(SET,MATERIAL,100,L,T)
************************************************************
Group 20. Preliminary Printout
DISTIL = T ;NULLPR = F
NDST = 0
DSTTOL =1.0E-02
EX(PRPS)=10. ;EX(TEM1)=596.
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 5 ;IYMON = 1 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = 1 ;IXPRF = 1 ;IXPRL = 14
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 3
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
PATCH(MYPLOT ,PROFIL, 1, 14, 1, 1, 1, 1, 1, 1)
PLOT(MYPLOT ,TEM1,0. ,0. )
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP