TALK=T;RUN(1,1)
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Flow Past A Moving Cylinder             )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =1.
 FSTEP = 1 ;LSTEP = 40
 TFRAC(1)=0.025 ;TFRAC(2)=0.05
 TFRAC(3)=0.075 ;TFRAC(4)=0.1
 TFRAC(5)=0.125 ;TFRAC(6)=0.15
 TFRAC(7)=0.175 ;TFRAC(8)=0.2
 TFRAC(9)=0.225 ;TFRAC(10)=0.25
 TFRAC(11)=0.275 ;TFRAC(12)=0.3
 TFRAC(13)=0.325 ;TFRAC(14)=0.35
 TFRAC(15)=0.375 ;TFRAC(16)=0.4
 TFRAC(17)=0.425 ;TFRAC(18)=0.45
 TFRAC(19)=0.475 ;TFRAC(20)=0.5
 TFRAC(21)=0.525 ;TFRAC(22)=0.55
 TFRAC(23)=0.575 ;TFRAC(24)=0.6
 TFRAC(25)=0.625 ;TFRAC(26)=0.65
 TFRAC(27)=0.675 ;TFRAC(28)=0.7
 TFRAC(29)=0.725 ;TFRAC(30)=0.75
 TFRAC(31)=0.775 ;TFRAC(32)=0.8
 TFRAC(33)=0.825 ;TFRAC(34)=0.85
 TFRAC(35)=0.875 ;TFRAC(36)=0.9
 TFRAC(37)=0.925 ;TFRAC(38)=0.95
 TFRAC(39)=0.975 ;TFRAC(40)=1.
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 79
 XULAST =40.
 XFRAC(1)=0.0125 ;XFRAC(2)=0.025
 XFRAC(3)=0.0375 ;XFRAC(4)=0.05
 XFRAC(5)=0.0625 ;XFRAC(6)=0.075
 XFRAC(7)=0.0875 ;XFRAC(8)=0.1
 XFRAC(9)=0.1125 ;XFRAC(10)=0.125
 XFRAC(11)=0.1375 ;XFRAC(12)=0.15
 XFRAC(13)=0.1625 ;XFRAC(14)=0.175
 XFRAC(15)=0.1875 ;XFRAC(16)=0.2
 XFRAC(17)=0.2125 ;XFRAC(18)=0.225
 XFRAC(19)=0.2375 ;XFRAC(20)=0.250208
 XFRAC(21)=0.262917 ;XFRAC(22)=0.275625
 XFRAC(23)=0.288333 ;XFRAC(24)=0.301042
 XFRAC(25)=0.31375 ;XFRAC(26)=0.326458
 XFRAC(27)=0.339167 ;XFRAC(28)=0.351875
 XFRAC(29)=0.364583 ;XFRAC(30)=0.377292
 XFRAC(31)=0.39 ;XFRAC(32)=0.402708
 XFRAC(33)=0.415417 ;XFRAC(34)=0.428125
 XFRAC(35)=0.440833 ;XFRAC(36)=0.453542
 XFRAC(37)=0.46625 ;XFRAC(38)=0.478958
 XFRAC(39)=0.491667 ;XFRAC(40)=0.504375
 XFRAC(41)=0.517083 ;XFRAC(42)=0.529792
 XFRAC(43)=0.5425 ;XFRAC(44)=0.555208
 XFRAC(45)=0.567917 ;XFRAC(46)=0.580625
 XFRAC(47)=0.593333 ;XFRAC(48)=0.606042
 XFRAC(49)=0.61875 ;XFRAC(50)=0.631458
 XFRAC(51)=0.644167 ;XFRAC(52)=0.656875
 XFRAC(53)=0.669583 ;XFRAC(54)=0.682292
 XFRAC(55)=0.695 ;XFRAC(56)=0.707708
 XFRAC(57)=0.720417 ;XFRAC(58)=0.733125
 XFRAC(59)=0.745833 ;XFRAC(60)=0.758542
 XFRAC(61)=0.77125 ;XFRAC(62)=0.783958
 XFRAC(63)=0.796667 ;XFRAC(64)=0.809375
 XFRAC(65)=0.822083 ;XFRAC(66)=0.834792
 XFRAC(67)=0.8475 ;XFRAC(68)=0.860208
 XFRAC(69)=0.872917 ;XFRAC(70)=0.885625
 XFRAC(71)=0.898333 ;XFRAC(72)=0.911042
 XFRAC(73)=0.92375 ;XFRAC(74)=0.936458
 XFRAC(75)=0.949167 ;XFRAC(76)=0.961875
 XFRAC(77)=0.974583 ;XFRAC(78)=0.987292
 XFRAC(79)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 39
 YVLAST =20.
 YFRAC(1)=0.025 ;YFRAC(2)=0.05
 YFRAC(3)=0.075 ;YFRAC(4)=0.1
 YFRAC(5)=0.125 ;YFRAC(6)=0.15
 YFRAC(7)=0.175 ;YFRAC(8)=0.2
 YFRAC(9)=0.225 ;YFRAC(10)=0.25
 YFRAC(11)=0.275 ;YFRAC(12)=0.3
 YFRAC(13)=0.325 ;YFRAC(14)=0.35
 YFRAC(15)=0.375 ;YFRAC(16)=0.4
 YFRAC(17)=0.425 ;YFRAC(18)=0.45
 YFRAC(19)=0.475 ;YFRAC(20)=0.5
 YFRAC(21)=0.525 ;YFRAC(22)=0.55
 YFRAC(23)=0.575 ;YFRAC(24)=0.6
 YFRAC(25)=0.626667 ;YFRAC(26)=0.653333
 YFRAC(27)=0.68 ;YFRAC(28)=0.706667
 YFRAC(29)=0.733333 ;YFRAC(30)=0.76
 YFRAC(31)=0.786667 ;YFRAC(32)=0.813333
 YFRAC(33)=0.84 ;YFRAC(34)=0.866667
 YFRAC(35)=0.893333 ;YFRAC(36)=0.92
 YFRAC(37)=0.946667 ;YFRAC(38)=0.973333
 YFRAC(39)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(149)=OBID
 NAME(150)=PRPS
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(U1,Y,Y,Y,N,N,Y)
 SOLUTN(V1,Y,Y,Y,N,N,Y)
 SOLUTN(OBID,Y,N,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 PRPS = 150
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =273. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =0.1 ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 CP1 =1005. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(OBID)=1.0E-10
 FIINIT(PRPS)=-1.
 
 PATCH(^OB3 ,INIVAL, 3, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB3 ,P1 ,0. ,0. )
 INIT(^OB3 ,PRPS,0. ,-1. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(^OB1 ,WEST , 1, 0, 0, 0, 0, 0, 1, 40)
 COVAL(^OB1 ,P1 ,1000. ,0. )
 COVAL(^OB1 ,U1 ,0. ,0. )
 COVAL(^OB1 ,V1 ,0. ,0. )
 
 PATCH(^OB2 ,EAST , 2, 0, 0, 0, 0, 0, 1, 40)
 COVAL(^OB2 ,P1 ,1000. ,0. )
 COVAL(^OB2 ,U1 ,0. ,0. )
 COVAL(^OB2 ,V1 ,0. ,0. )
 
 PATCH(^OB4 ,SOUTH , 4, 0, 0, 0, 0, 0, 1, 40)
 COVAL(^OB4 ,P1 ,1000. ,0. )
 COVAL(^OB4 ,U1 ,0. ,0. )
 COVAL(^OB4 ,V1 ,0. ,0. )
 
 PATCH(^OB5 ,NORTH , 5, 0, 0, 0, 0, 0, 1, 40)
 COVAL(^OB5 ,P1 ,1000. ,0. )
 COVAL(^OB5 ,U1 ,0. ,0. )
 COVAL(^OB5 ,V1 ,0. ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 20 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-03
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(OBID,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(OBID)=1.0E+10 ;VARMIN(OBID)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 ISG62 = 0
 SPEDAT(SET,MOFOR,MOFFILE,C,V203.MOF)
 SPEDAT(SET,GXMONI,TRANSIENT,L,F)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,OBJNAM,^OB1,C,B1)
 SPEDAT(SET,OBJTYP,^OB1,C,OUTLET)
 SPEDAT(SET,ARATIO,^OB1,R,1.)
 SPEDAT(SET,OBJNAM,^OB2,C,B2)
 SPEDAT(SET,OBJTYP,^OB2,C,OUTLET)
 SPEDAT(SET,ARATIO,^OB2,R,1.)
 SPEDAT(SET,OBJNAM,^OB3,C,B4)
 SPEDAT(SET,OBJTYP,^OB3,C,BLOCKAGE)
 SPEDAT(SET,B4,MATERIAL,R,-1.)
 SPEDAT(SET,OBJNAM,^OB4,C,B5)
 SPEDAT(SET,OBJTYP,^OB4,C,OUTLET)
 SPEDAT(SET,ARATIO,^OB4,R,1.)
 SPEDAT(SET,OBJNAM,^OB5,C,B7)
 SPEDAT(SET,OBJTYP,^OB5,C,OUTLET)
 SPEDAT(SET,ARATIO,^OB5,R,1.)
 SPEDAT(SET,FACETDAT,NUMOBJ,I,5)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(OBID,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 15 ;IYMON = 11 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 100000 ;ISTPRF = 1 ;ISTPRL = 10000
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
 IDISPA = 1 ;IDISPB = 0 ;IDISPC = 0
 CSG1    ='A'
STOP