Heat exchange by external plates.


TALK=T;RUN(1,1)
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Heat exchange by external plates.       )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 20
 XULAST =1.
 XFRAC(1)=0.05 ;XFRAC(2)=0.1
 XFRAC(3)=0.15 ;XFRAC(4)=0.2
 XFRAC(5)=0.25 ;XFRAC(6)=0.3
 XFRAC(7)=0.35 ;XFRAC(8)=0.4
 XFRAC(9)=0.45 ;XFRAC(10)=0.5
 XFRAC(11)=0.55 ;XFRAC(12)=0.6
 XFRAC(13)=0.65 ;XFRAC(14)=0.7
 XFRAC(15)=0.75 ;XFRAC(16)=0.8
 XFRAC(17)=0.85 ;XFRAC(18)=0.9
 XFRAC(19)=0.95 ;XFRAC(20)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 10
 YVLAST =0.2
 YFRAC(1)=0.1 ;YFRAC(2)=0.2
 YFRAC(3)=0.3 ;YFRAC(4)=0.4
 YFRAC(5)=0.5 ;YFRAC(6)=0.6
 YFRAC(7)=0.7 ;YFRAC(8)=0.8
 YFRAC(9)=0.9 ;YFRAC(10)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =0.1
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(148)=DEN1
 NAME(150)=TEM1
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(DEN1,Y,N,N,N,N,Y)
 SOLUTN(TEM1,Y,Y,Y,N,N,Y)
 DEN1 = 148
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(TEM1,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1.189 ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =273. ;PRESS0 =1.0E+05
 DVO1DT =3.41E-03 ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.544E-05 ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(TEM1)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(TEM1)=1.
 CP1 =1005. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(DEN1)=1.0E-10
 FIINIT(TEM1)=20.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(OB1 ,WEST , 1, 1, 1, 10, 1, 1, 1, 1)
 COVAL(OB1 ,P1 , FIXFLU ,1.189 )
 COVAL(OB1 ,U1 ,0. ,1. )
 COVAL(OB1 ,V1 ,0. ,0. )
 COVAL(OB1 ,TEM1,0. ,20. )
 
 PATCH(OB2 ,EAST , 20, 20, 1, 10, 1, 1, 1, 1)
 COVAL(OB2 ,P1 ,1000. ,0. )
 COVAL(OB2 ,U1 ,0. ,0. )
 COVAL(OB2 ,V1 ,0. ,0. )
 COVAL(OB2 ,TEM1,0. , SAME )
 
 PATCH(OB3 ,SWALL , 1, 20, 1, 1, 1, 1, 1, 1)
 COVAL(OB3 ,U1 ,1. ,0. )
 COVAL(OB3 ,TEM1,In-Form:source - see Grp 19)
 
 PATCH(OB4 ,NWALL , 1, 20, 10, 10, 1, 1, 1, 1)
 COVAL(OB4 ,U1 ,1. ,0. )
 COVAL(OB4 ,TEM1,In-Form:source - see Grp 19)
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 100 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-03
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(TEM1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(TEM1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(DEN1,LINRLX,1.)
 RELAX(TEM1,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
 VARMAX(TEM1)=3000. ;VARMIN(TEM1)=-204.75
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG52 = 2
 ISG62 = 1
 SPEDAT(SET,DOMAIN,PHASE_1_MAT,I,0)
 SPEDAT(SET,FACETDAT,NUMOBJ,I,4)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,OBJNAM,!OB1,C,INLET)
 SPEDAT(SET,OBJTYP,!OB1,C,INLET)
 SPEDAT(SET,OBJNAM,!OB2,C,OUTLET)
 SPEDAT(SET,OBJTYP,!OB2,C,OUTLET)
 SPEDAT(SET,ARATIO,!OB2,R,1.)
 SPEDAT(SET,OBJNAM,!OB3,C,SPLATE)
 SPEDAT(SET,OBJTYP,!OB3,C,PLATE)
 SPEDAT(SET,SOURCE,TEM1!SPLATE,C,=1000.*XG!VOLU)
 SPEDAT(SET,OBJNAM,!OB4,C,NPLATE)
 SPEDAT(SET,OBJTYP,!OB4,C,PLATE)
 SPEDAT(SET,SOURCE,TEM1!NPLATE,C,=9.999999*(100.*(1-XG))!VOLU)
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=0.0102 ;EX(U1)=1.
 EX(V1)=6.69E-04 ;EX(DEN1)=1.189
 EX(TEM1)=22.290001
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(DEN1,Y,N,Y,N,N,N)
 OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 10 ;IYMON = 5 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP