TALK=T;RUN(1,1)
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Ejection seat                           )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =1.
 FSTEP = 1 ;LSTEP = 20
 TFRAC(1)=0.05 ;TFRAC(2)=0.1
 TFRAC(3)=0.15 ;TFRAC(4)=0.2
 TFRAC(5)=0.25 ;TFRAC(6)=0.3
 TFRAC(7)=0.35 ;TFRAC(8)=0.4
 TFRAC(9)=0.45 ;TFRAC(10)=0.5
 TFRAC(11)=0.55 ;TFRAC(12)=0.6
 TFRAC(13)=0.65 ;TFRAC(14)=0.7
 TFRAC(15)=0.75 ;TFRAC(16)=0.8
 TFRAC(17)=0.85 ;TFRAC(18)=0.9
 TFRAC(19)=0.95 ;TFRAC(20)=1.
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 75
 YVLAST =5.
 YFRAC(1)=0.013333 ;YFRAC(2)=0.026667
 YFRAC(3)=0.04 ;YFRAC(4)=0.053333
 YFRAC(5)=0.066667 ;YFRAC(6)=0.08
 YFRAC(7)=0.093333 ;YFRAC(8)=0.106667
 YFRAC(9)=0.12 ;YFRAC(10)=0.133333
 YFRAC(11)=0.146667 ;YFRAC(12)=0.16
 YFRAC(13)=0.173333 ;YFRAC(14)=0.186667
 YFRAC(15)=0.2 ;YFRAC(16)=0.213333
 YFRAC(17)=0.226667 ;YFRAC(18)=0.24
 YFRAC(19)=0.253333 ;YFRAC(20)=0.266667
 YFRAC(21)=0.28 ;YFRAC(22)=0.293333
 YFRAC(23)=0.306667 ;YFRAC(24)=0.32
 YFRAC(25)=0.333333 ;YFRAC(26)=0.346667
 YFRAC(27)=0.36 ;YFRAC(28)=0.373333
 YFRAC(29)=0.386667 ;YFRAC(30)=0.4
 YFRAC(31)=0.413333 ;YFRAC(32)=0.426667
 YFRAC(33)=0.44 ;YFRAC(34)=0.453333
 YFRAC(35)=0.466667 ;YFRAC(36)=0.48
 YFRAC(37)=0.493333 ;YFRAC(38)=0.506667
 YFRAC(39)=0.52 ;YFRAC(40)=0.533333
 YFRAC(41)=0.546667 ;YFRAC(42)=0.56
 YFRAC(43)=0.573333 ;YFRAC(44)=0.586667
 YFRAC(45)=0.6 ;YFRAC(46)=0.613333
 YFRAC(47)=0.626667 ;YFRAC(48)=0.64
 YFRAC(49)=0.653333 ;YFRAC(50)=0.666667
 YFRAC(51)=0.68 ;YFRAC(52)=0.693333
 YFRAC(53)=0.706667 ;YFRAC(54)=0.72
 YFRAC(55)=0.733333 ;YFRAC(56)=0.746667
 YFRAC(57)=0.76 ;YFRAC(58)=0.773333
 YFRAC(59)=0.786667 ;YFRAC(60)=0.8
 YFRAC(61)=0.813333 ;YFRAC(62)=0.826667
 YFRAC(63)=0.84 ;YFRAC(64)=0.853333
 YFRAC(65)=0.866667 ;YFRAC(66)=0.88
 YFRAC(67)=0.893333 ;YFRAC(68)=0.906667
 YFRAC(69)=0.92 ;YFRAC(70)=0.933333
 YFRAC(71)=0.946667 ;YFRAC(72)=0.96
 YFRAC(73)=0.973333 ;YFRAC(74)=0.986667
 YFRAC(75)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 75
 ZWLAST =5.
 ZFRAC(1)=0.013333 ;ZFRAC(2)=0.026667
 ZFRAC(3)=0.04 ;ZFRAC(4)=0.053333
 ZFRAC(5)=0.066667 ;ZFRAC(6)=0.08
 ZFRAC(7)=0.093333 ;ZFRAC(8)=0.106667
 ZFRAC(9)=0.12 ;ZFRAC(10)=0.133333
 ZFRAC(11)=0.146667 ;ZFRAC(12)=0.16
 ZFRAC(13)=0.173333 ;ZFRAC(14)=0.186667
 ZFRAC(15)=0.2 ;ZFRAC(16)=0.213333
 ZFRAC(17)=0.226667 ;ZFRAC(18)=0.24
 ZFRAC(19)=0.253333 ;ZFRAC(20)=0.266667
 ZFRAC(21)=0.28 ;ZFRAC(22)=0.293333
 ZFRAC(23)=0.306667 ;ZFRAC(24)=0.32
 ZFRAC(25)=0.333333 ;ZFRAC(26)=0.346667
 ZFRAC(27)=0.36 ;ZFRAC(28)=0.373333
 ZFRAC(29)=0.386667 ;ZFRAC(30)=0.4
 ZFRAC(31)=0.413333 ;ZFRAC(32)=0.426667
 ZFRAC(33)=0.44 ;ZFRAC(34)=0.453333
 ZFRAC(35)=0.466667 ;ZFRAC(36)=0.48
 ZFRAC(37)=0.493333 ;ZFRAC(38)=0.506667
 ZFRAC(39)=0.52 ;ZFRAC(40)=0.533333
 ZFRAC(41)=0.546667 ;ZFRAC(42)=0.56
 ZFRAC(43)=0.573333 ;ZFRAC(44)=0.586667
 ZFRAC(45)=0.6 ;ZFRAC(46)=0.613333
 ZFRAC(47)=0.626667 ;ZFRAC(48)=0.64
 ZFRAC(49)=0.653333 ;ZFRAC(50)=0.666667
 ZFRAC(51)=0.68 ;ZFRAC(52)=0.693333
 ZFRAC(53)=0.706667 ;ZFRAC(54)=0.72
 ZFRAC(55)=0.733333 ;ZFRAC(56)=0.746667
 ZFRAC(57)=0.76 ;ZFRAC(58)=0.773333
 ZFRAC(59)=0.786667 ;ZFRAC(60)=0.8
 ZFRAC(61)=0.813333 ;ZFRAC(62)=0.826667
 ZFRAC(63)=0.84 ;ZFRAC(64)=0.853333
 ZFRAC(65)=0.866667 ;ZFRAC(66)=0.88
 ZFRAC(67)=0.893333 ;ZFRAC(68)=0.906667
 ZFRAC(69)=0.92 ;ZFRAC(70)=0.933333
 ZFRAC(71)=0.946667 ;ZFRAC(72)=0.96
 ZFRAC(73)=0.973333 ;ZFRAC(74)=0.986667
 ZFRAC(75)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(5)=V1
 NAME(7)=W1 ;NAME(149)=OBID
 NAME(150)=PRPS
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(OBID,Y,N,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 PRPS = 150
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1.189 ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =3.41E-03 ;DRH1DP =1.0E-05
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.544E-09 ;ENUT =0.
 PRNDTL(V1)=1. ;PRNDTL(W1)=1.
 PRT(V1)=1. ;PRT(W1)=1.
 CP1 =1005. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(W1)=1.0E-10 ;FIINIT(OBID)=1.0E-10
 FIINIT(PRPS)=0.
 
 PATCH(^OB1 ,INIVAL, 1, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB1 ,P1 ,0. ,0. )
 INIT(^OB1 ,PRPS,0. ,-1. )
 
 PATCH(^OB2 ,INIVAL, 2, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB2 ,P1 ,0. ,0. )
 INIT(^OB2 ,PRPS,0. ,-1. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(^OB3 ,HIGH , 3, 0, 0, 0, 0, 0, 1, 20)
 COVAL(^OB3 ,P1 ,1000. ,0. )
 COVAL(^OB3 ,V1 ,0. ,0. )
 COVAL(^OB3 ,W1 ,0. ,0. )
 
 PATCH(^OB4 ,LOW , 4, 0, 0, 0, 0, 0, 1, 20)
 COVAL(^OB4 ,P1 ,1000. ,0. )
 COVAL(^OB4 ,V1 ,0. ,0. )
 COVAL(^OB4 ,W1 ,0. ,0. )
 
 PATCH(^OB5 ,NORTH , 5, 0, 0, 0, 0, 0, 1, 20)
 COVAL(^OB5 ,P1 ,1000. ,0. )
 COVAL(^OB5 ,V1 ,0. ,0. )
 COVAL(^OB5 ,W1 ,0. ,0. )
 
 PATCH(^OB6 ,SOUTH , 6, 0, 0, 0, 0, 0, 1, 20)
 COVAL(^OB6 ,P1 ,1000. ,0. )
 COVAL(^OB6 ,V1 ,0. ,0. )
 COVAL(^OB6 ,W1 ,0. ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 20 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-03
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(W1)=10
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(W1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.5)
 RELAX(V1,FALSDT,1.)
 RELAX(W1,FALSDT,1.)
 RELAX(OBID,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(OBID)=1.0E+10 ;VARMIN(OBID)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 ISG62 = 0
 SPEDAT(SET,DOMAIN,PHASE_1_MAT,I,0)
 SPEDAT(SET,MOFOR,MOFFILE,C,JET.MOF)
 SPEDAT(SET,MOFOR,VELCON,R,100.)
 SPEDAT(SET,GXMONI,TRANSIENT,L,F)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,OBJNAM,^OB1,C,PLANE)
 SPEDAT(SET,OBJTYP,^OB1,C,BLOCKAGE)
 SPEDAT(SET,PLANE,MATERIAL,R,-1.)
 SPEDAT(SET,OBJNAM,^OB2,C,SEAT)
 SPEDAT(SET,OBJTYP,^OB2,C,BLOCKAGE)
 SPEDAT(SET,SEAT,MATERIAL,R,-1.)
 SPEDAT(SET,OBJNAM,^OB3,C,B3)
 SPEDAT(SET,OBJTYP,^OB3,C,OUTLET)
 SPEDAT(SET,ARATIO,^OB3,R,1.)
 SPEDAT(SET,OBJNAM,^OB4,C,B4)
 SPEDAT(SET,OBJTYP,^OB4,C,OUTLET)
 SPEDAT(SET,ARATIO,^OB4,R,1.)
 SPEDAT(SET,OBJNAM,^OB5,C,B5)
 SPEDAT(SET,OBJTYP,^OB5,C,OUTLET)
 SPEDAT(SET,ARATIO,^OB5,R,1.)
 SPEDAT(SET,OBJNAM,^OB6,C,B6)
 SPEDAT(SET,OBJTYP,^OB6,C,OUTLET)
 SPEDAT(SET,ARATIO,^OB6,R,1.)
 SPEDAT(SET,FACETDAT,NUMOBJ,I,6)
 SPEDAT(SET,MATERIAL,0,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=1.167 ;EX(V1)=0.5973
 EX(W1)=0.4973 ;EX(OBID)=0.02204
 EX(PRPS)=0.
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,Y,Y,N,Y,Y)
 OUTPUT(W1,Y,Y,Y,N,Y,Y)
 OUTPUT(OBID,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 21 ;IZMON = 14
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 100000 ;ISTPRF = 1 ;ISTPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
 IDISPA = 1 ;IDISPB = 0 ;IDISPC = 0
 CSG1    ='M'
STOP