TALK=T;RUN(1,1)
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Body with large Conductivity in uniform )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 2
 XULAST =1.
 XFRAC(1)=0.5 ;XFRAC(2)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 1
 YVLAST =1.
 YFRAC(1)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 2
 ZWLAST =1.
 ZFRAC(1)=0.5 ;ZFRAC(2)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(147)=TEM1 ;NAME(150)=PRPS
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(TEM1,Y,Y,Y,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,N)
 PRPS = 150
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(TEM1,N,Y,Y,Y,N,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 USP = T ; USPDBG = F
 UTCPLT = F ; USPIMB = F
 UAUTO = T ; UGTGRD = F
 USPVTK = T ; USPTER = F
 USCANX = T ; USCANY = F
 USCANZ = T
 MXLEV = 0 ;MYLEV = 0 ;MZLEV = 0
 DOMAT = -1
 CELLST = 10 ; FACEST = 10
 MINPRP = -1 ; MAXPRP = 250
 UMXLEV = 4 ; UMXCLS = 10000
 UNOLAY = 2 ; UIOLEV = 1
 UWALEV = 0 ; UGRITR = 2
 UMXCRS = 16
 USPREL =0.7 ; UMNCEL =1.0E-04
 UDVREL =1.
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1.189 ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =273. ;PRESS0 =1.0E+05
 DVO1DT =3.41E-03 ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.544E-05 ;ENUT =0.
 PRNDTL(TEM1)=-0.1
 PRT(TEM1)=1.
 CP1 =1005. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(TEM1)=1.0E-10 ;FIINIT(PRPS)=-1.
 
 PATCH(^OB1 ,INIVAL, 1, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB1 ,PRPS,0. ,110. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(OB2 ,WWALL , 1, 1, 1, 1, 1, 2, 1, 1)
 COVAL(OB2 ,TEM1,1. ,0. )
 
 PATCH(OB3 ,EWALL , 2, 2, 1, 1, 1, 2, 1, 1)
 COVAL(OB3 ,TEM1,1. ,100. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 300 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-07
 ************************************************************
  Group 16. Terminate Iterations
 LITER(TEM1)=100
 ENDIT(TEM1)=1.0E-07
 ************************************************************
  Group 17. Relaxation
 RELAX(TEM1,FALSDT,1.0E+09)
 RELAX(PRPS,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(TEM1)=3000. ;VARMIN(TEM1)=-204.75
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,DOMAIN,PHASE_1_MAT,I,0)
 SPEDAT(SET,AUTOMESH,OLD-Y,I,1)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,OBJNAM,^OB1,C,BODY)
 SPEDAT(SET,OBJTYP,^OB1,C,BLOCKAGE)
 SPEDAT(SET,BODY,MATERIAL,R,110.)
 SPEDAT(SET,OBJNAM,!OB2,C,PL1)
 SPEDAT(SET,OBJTYP,!OB2,C,PLATE)
 SPEDAT(SET,OBJNAM,!OB3,C,PL2)
 SPEDAT(SET,OBJTYP,!OB3,C,PLATE)
 SPEDAT(SET,FACETDAT,NUMOBJ,I,3)
 SPEDAT(SET,MATERIAL,110,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 1 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP