```
TALK=T;RUN(1,1)
DISPLAY
A rectangular plate with a centrally-placed CIRCULAR hole is
extended by uniform equal forces on its left and right
surfaces, which are allowed to distort.
By reason of symmetry, only one quarter of the plate is analysed.

Comparison - a analytical solution (Timoshenko and Goodier).
"Finite Volume method for stress analysis in Complex Domains"
Int. J. for numerical methods in engineering",
v. 37, 3751-3756 (1994).)

ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************

TEXT(USP:2D xy Plate with CIRCULAR hole      )

************************************************************
************************************************************

IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 10
XULAST =2.
XFRAC(1)=0.1 ;XFRAC(4)=0.4
XFRAC(7)=0.7 ;XFRAC(10)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 10
YVLAST =2.
YFRAC(1)=0.1 ;YFRAC(5)=0.5
YFRAC(9)=0.9
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 1
ZWLAST =0.5
ZFRAC(1)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(132)=ZZZ7 ;NAME(133)=XY/T
NAME(134)=SXYT ;NAME(135)=SY/T
NAME(136)=SYTH ;NAME(137)=SX/T
NAME(138)=SXTH ;NAME(139)=TET7
NAME(140)=R7 ;NAME(141)=EPSZ
NAME(142)=EPSX ;NAME(143)=EPSY
NAME(144)=STXY ;NAME(145)=STRZ
NAME(146)=STRY ;NAME(147)=STRX
NAME(148)=PRPS ;NAME(149)=DISX
NAME(150)=DISY
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(ZZZ7,Y,N,N,N,N,Y)
SOLUTN(XY/T,Y,N,N,N,N,Y)
SOLUTN(SXYT,Y,N,N,N,N,Y)
SOLUTN(SY/T,Y,N,N,N,N,Y)
SOLUTN(SYTH,Y,N,N,N,N,Y)
SOLUTN(SX/T,Y,N,N,N,N,Y)
SOLUTN(SXTH,Y,N,N,N,N,Y)
SOLUTN(TET7,Y,N,N,N,N,Y)
SOLUTN(R7,Y,N,N,N,N,Y)
SOLUTN(EPSZ,Y,N,N,N,N,Y)
SOLUTN(EPSX,Y,N,N,N,N,Y)
SOLUTN(EPSY,Y,N,N,N,N,Y)
SOLUTN(STXY,Y,N,N,N,N,Y)
SOLUTN(STRZ,Y,N,N,N,N,Y)
SOLUTN(STRY,Y,N,N,N,N,Y)
SOLUTN(STRX,Y,N,N,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(DISX,Y,Y,N,N,N,Y)
SOLUTN(DISY,Y,Y,N,N,N,Y)
PRPS = 148
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(DISX,N,Y,Y,Y,N,Y)
TERMS(DISY,N,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
USP = T ; USPDBG= F
UTCPLT = T ; USPIMB= F
UAUTO = T ; UGTGRD= F
USPVTK = T ; USPTER= F
USCANX = T ; USCANY= T
USCANZ = T
MXLEV = 0 ;MYLEV = 0 ;MZLEV = 0
DOMAT = -1
CELLST = 10 ; FACEST= 10
MINPRP = -1 ; MAXPRP= 250
UMXLEV = 4 ; UMXCLS= 10000
UNOLAY = 2 ; UIOLEV= 2
UWALEV = 2 ; UGRITR= 2
UMXCRS = 16
USPREL =0.7 ; UMNCEL=1.
UDVREL =1.
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =7800. ;TMP1 =0.
EL1 =0.
TSURR =0. ;TEMP0 =0.
PRESS0 =0.
DVO1DT =1.0E-05 ;DRH1DP =5.0E-12
EMISS =0. ;SCATT =0.
ENUL =0.3 ;ENUT =0.
PRNDTL(DISX)=1. ;PRNDTL(DISY)=1.
PRT(DISX)=1. ;PRT(DISY)=1.
CP1 =473. ;CP2 =1.
*  List of user-defined materials to be read by EARTH
MATFLG=T;IMAT=1
*  Name
*Ind. Dens.  Viscos.  Spec.heat  Conduct.  Expans.  Compr.
*
160 7800.0 0.3 473.0 43.0 1.0E-5 1.0E-7
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(ZZZ7)=1.0E-10 ;FIINIT(XY/T)=1.001E-10
FIINIT(SXYT)=1.001E-10 ;FIINIT(SY/T)=1.001E-10
FIINIT(SYTH)=1.001E-10 ;FIINIT(SX/T)=1.001E-10
FIINIT(SXTH)=1.001E-10 ;FIINIT(TET7)=1.001E-10
FIINIT(R7)=1.001E-10 ;FIINIT(EPSZ)=1.001E-10
FIINIT(EPSX)=1.001E-10 ;FIINIT(EPSY)=1.001E-10
FIINIT(STXY)=1.001E-10 ;FIINIT(STRZ)=1.001E-10
FIINIT(STRY)=1.001E-10 ;FIINIT(STRX)=1.001E-10
FIINIT(PRPS)=160. ;FIINIT(DISX)=1.0E-10
FIINIT(DISY)=1.0E-10

PATCH(^OB5 ,INIVAL, 5, 0, 0, 0, 0, 0, 1, 1)
INIT(^OB5 ,PRPS,0. ,198. )
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources

PATCH(OB1 ,WWALL , 1, 1, 1, 10, 1, 1, 1, 1)
COVAL(OB1 ,DISX,In-Form:source - see Grp 19)

PATCH(OB2 ,SWALL , 1, 10, 1, 1, 1, 1, 1, 1)
COVAL(OB2 ,DISY,In-Form:source - see Grp 19)

PATCH(OB3 ,NWALL , 1, 10, 10, 10, 1, 1, 1, 1)
COVAL(OB3 ,DISX,In-Form:source - see Grp 19)
COVAL(OB3 ,DISY,In-Form:source - see Grp 19)

PATCH(OB4 ,EWALL , 10, 10, 1, 10, 1, 1, 1, 1)
COVAL(OB4 ,DISX,In-Form:source - see Grp 19)
COVAL(OB4 ,DISY,In-Form:source - see Grp 19)
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 800 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-07
************************************************************
Group 16. Terminate Iterations
LITER(DISX)=20 ;LITER(DISY)=20
ENDIT(DISX)=1.0E-03 ;ENDIT(DISY)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(ZZZ7,LINRLX,1.)
RELAX(XY/T,LINRLX,1.)
RELAX(SXYT,LINRLX,1.)
RELAX(SY/T,LINRLX,1.)
RELAX(SYTH,LINRLX,1.)
RELAX(SX/T,LINRLX,1.)
RELAX(SXTH,LINRLX,1.)
RELAX(TET7,LINRLX,1.)
RELAX(R7,LINRLX,1.)
RELAX(EPSZ,LINRLX,1.)
RELAX(EPSX,LINRLX,1.)
RELAX(EPSY,LINRLX,1.)
RELAX(STXY,LINRLX,1.)
RELAX(STRZ,LINRLX,1.)
RELAX(STRY,LINRLX,1.)
RELAX(STRX,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
RELAX(DISX,FALSDT,1.0E+09)
RELAX(DISY,FALSDT,1.0E+09)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(ZZZ7)=1.0E+10 ;VARMIN(ZZZ7)=-1.0E+10
VARMAX(XY/T)=1.0E+10 ;VARMIN(XY/T)=-1.0E+10
VARMAX(SXYT)=1.0E+10 ;VARMIN(SXYT)=-1.0E+10
VARMAX(SY/T)=1.0E+10 ;VARMIN(SY/T)=-1.0E+10
VARMAX(SYTH)=1.0E+10 ;VARMIN(SYTH)=-1.0E+10
VARMAX(SX/T)=1.0E+10 ;VARMIN(SX/T)=-1.0E+10
VARMAX(SXTH)=1.0E+10 ;VARMIN(SXTH)=-1.0E+10
VARMAX(TET7)=1.0E+10 ;VARMIN(TET7)=-1.0E+10
VARMAX(R7)=1.0E+10 ;VARMIN(R7)=-1.0E+10
VARMAX(EPSZ)=1.0E+10 ;VARMIN(EPSZ)=-1.0E+10
VARMAX(EPSX)=1.0E+10 ;VARMIN(EPSX)=-1.0E+10
VARMAX(EPSY)=1.0E+10 ;VARMIN(EPSY)=-1.0E+10
VARMAX(STXY)=1.0E+10 ;VARMIN(STXY)=-1.0E+10
VARMAX(STRZ)=1.0E+10 ;VARMIN(STRZ)=-1.0E+10
VARMAX(STRY)=1.0E+10 ;VARMIN(STRY)=-1.0E+10
VARMAX(STRX)=1.0E+10 ;VARMIN(STRX)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(DISX)=1.0E+10 ;VARMIN(DISX)=-1.0E+10
VARMAX(DISY)=1.0E+10 ;VARMIN(DISY)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
STRA = T
PARSOL = F
ISG21 = 400
ISG52 = 3
ISG62 = 1
CSG10   ='q1'
SPEDAT(SET,DOMAIN,PHASE_1_MAT,I,160)
SPEDAT(SET,DOMAIN,PROPS_FILE_1,C,Q1)
SPEDAT(SET,MATERIAL,160,L,T)
SPEDAT(SET,STORED,R7,C,=SQRT(XG^2+YG^2)!ZSLFIN)
SPEDAT(SET,STORED,TET7,C,=ATAN(YG/(XG+1.E-10))!ZSLFIN)
SPEDAT(SET,STORED,SXTH,C,=1.0E+04*(1.0-(0.5/R7)^2*(1.5*COS(2*TET7\$)
SPEDAT(SET,STORED,SXTH,C,)+COS(4*TET7))+1.50*(0.5/R7)^4*COS(4*TET\$)
SPEDAT(SET,STORED,SXTH,C,7))!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,SX/T,C,=STRX/SXTH!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,SYTH,C,=1.0E+04*(-(0.5/R7)^2*(0.5*COS(2*TET7)-C\$)
SPEDAT(SET,STORED,SYTH,C,OS(4*TET7))-1.5*(0.5/R7)^4*COS(4*TET7))!\$)
SPEDAT(SET,STORED,SYTH,C,IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,SY/T,C,=STRY/SYTH!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,SXYT,C,=1.0E+04*(-(0.25/(YG^2+XG^2))*(0.5*SIN(2\$)
SPEDAT(SET,STORED,SXYT,C,*ATAN(YG/XG))+SIN(4*ATAN(YG/XG)))+1.5*(0\$)
SPEDAT(SET,STORED,SXYT,C,.25/(YG^2+XG^2))^2*SIN(4*ATAN(YG/XG)))!I\$)
SPEDAT(SET,STORED,SXYT,C,MAT>100!ZSLFIN)
SPEDAT(SET,STORED,XY/T,C,=STXY/SXYT!IMAT>100!ZSLFIN)
SPEDAT(SET,SOURCE,DISY!TOP,C,=COVAL(2.0E-10&1.0E+04*(-(0.25/(2.^2\$)
SPEDAT(SET,SOURCE,DISY!TOP,C,+XG^2))*(0.5*COS(2*ATAN(2./XG))-COS(\$)
SPEDAT(SET,SOURCE,DISY!TOP,C,4*ATAN(2./XG)))-1.5*(0.25/(2.^2+XG^2\$)
SPEDAT(SET,SOURCE,DISY!TOP,C,))^2*COS(4*ATAN(2./XG))))!VOLU)
SPEDAT(SET,SOURCE,DISX!TOP,C,=COVAL(2.0E-10&1.0E+04*(-(0.25/(2.^2\$)
SPEDAT(SET,SOURCE,DISX!TOP,C,+XG^2))*(0.5*SIN(2*ATAN(2./XG))+SIN(\$)
SPEDAT(SET,SOURCE,DISX!TOP,C,4*ATAN(2./XG)))+1.5*(0.25/(2.^2+XG^2\$)
SPEDAT(SET,SOURCE,DISX!TOP,C,))^2*SIN(4*ATAN(2./XG))))!VOLU)
SPEDAT(SET,SOURCE,DISX!RIGHT,C,=COVAL(2.0E-10&1.0E+04*(1-(0.25/(2\$)
SPEDAT(SET,SOURCE,DISX!RIGHT,C,.^2+YG^2))*(1.5*COS(2*ATAN(YG/2.))\$)
SPEDAT(SET,SOURCE,DISX!RIGHT,C,+COS(4*ATAN(YG/2.)))+1.5*(0.25/(2.\$)
SPEDAT(SET,SOURCE,DISX!RIGHT,C,^2+YG^2))^2*COS(4*ATAN(YG/2.))))!V\$)
SPEDAT(SET,SOURCE,DISX!RIGHT,C,OLU)
SPEDAT(SET,STORED,ZZZ7,C,=1.0E+04*(1-(0.25/(2.^2+YG^2))*(1.5*COS(\$)
SPEDAT(SET,STORED,ZZZ7,C,2*ATAN(YG/2.))+COS(4*ATAN(YG/2.)))+1.5*(\$)
SPEDAT(SET,STORED,ZZZ7,C,0.25/(2.^2+YG^2))^2*COS(4*ATAN(YG/2.)))!\$)
SPEDAT(SET,STORED,ZZZ7,C,ZSLFIN)
SPEDAT(SET,SOURCE,DISY!RIGHT,C,=COVAL(2.0E-10&1.0E+04*(-(0.25/(2.\$)
SPEDAT(SET,SOURCE,DISY!RIGHT,C,^2+YG^2))*(0.5*SIN(2*ATAN(YG/2.))+\$)
SPEDAT(SET,SOURCE,DISY!RIGHT,C,SIN(4*ATAN(YG/2.)))+1.5*(0.25/(2.^\$)
SPEDAT(SET,SOURCE,DISY!RIGHT,C,2+YG^2))^2*SIN(4*ATAN(YG/2.))))!VO\$)
SPEDAT(SET,SOURCE,DISY!RIGHT,C,LU)
SPEDAT(SET,SOURCE,DISX!LEFT,C,=COVAL(1&0)!VOLU)
SPEDAT(SET,SOURCE,DISY!BOT,C,=COVAL(1&0)!VOLU)
SPEDAT(SET,OBJNAM,!OB1,C,LEFT)
SPEDAT(SET,OBJTYP,!OB1,C,PLATE)
SPEDAT(SET,OBJNAM,!OB2,C,BOT)
SPEDAT(SET,OBJTYP,!OB2,C,PLATE)
SPEDAT(SET,OBJNAM,!OB3,C,TOP)
SPEDAT(SET,OBJTYP,!OB3,C,PLATE)
SPEDAT(SET,OBJNAM,!OB4,C,RIGHT)
SPEDAT(SET,OBJTYP,!OB4,C,PLATE)
SPEDAT(SET,OBJNAM,^OB5,C,HOLE)
SPEDAT(SET,OBJTYP,^OB5,C,BLOCKAGE)
SPEDAT(SET,HOLE,MATERIAL,R,198.)
SPEDAT(SET,FACETDAT,NUMOBJ,I,5)
SPEDAT(SET,MATERIAL,198,L,T)
************************************************************
Group 20. Preliminary Printout
DISTIL = T ;NULLPR = F
NDST = 0
DSTTOL =1.0E-02
EX(ZZZ7)=9338. ;EX(XY/T)=1.206
EX(SXYT)=1296. ;EX(SY/T)=1.234
EX(SYTH)=1445. ;EX(SX/T)=1.055
EX(SXTH)=9872. ;EX(TET7)=0.7854
EX(R7)=1.351 ;EX(EPSZ)=3.253E-04
EX(EPSX)=9.71E-04 ;EX(EPSY)=2.903E-04
EX(STXY)=1327. ;EX(STRZ)=2.444E-13
EX(STRY)=1477. ;EX(STRX)=9801.
EX(PRPS)=0. ;EX(DISX)=1.184E-03
EX(DISY)=3.649E-04
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(ZZZ7,Y,N,Y,N,N,N)
OUTPUT(XY/T,Y,N,Y,N,N,N)
OUTPUT(SXYT,Y,N,Y,N,N,N)
OUTPUT(SY/T,Y,N,Y,N,N,N)
OUTPUT(SYTH,Y,N,Y,N,N,N)
OUTPUT(SX/T,Y,N,Y,N,N,N)
OUTPUT(SXTH,Y,N,Y,N,N,N)
OUTPUT(TET7,Y,N,Y,N,N,N)
OUTPUT(R7,Y,N,Y,N,N,N)
OUTPUT(EPSZ,Y,N,Y,N,N,N)
OUTPUT(EPSX,Y,N,Y,N,N,N)
OUTPUT(EPSY,Y,N,Y,N,N,N)
OUTPUT(STXY,Y,N,Y,N,N,N)
OUTPUT(STRZ,Y,N,Y,N,N,N)
OUTPUT(STRY,Y,N,Y,N,N,N)
OUTPUT(STRX,Y,N,Y,N,N,N)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(DISX,Y,N,Y,Y,Y,Y)
OUTPUT(DISY,Y,N,Y,Y,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 7 ;IYMON = 1 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = 3 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = 4 ;IYPRF = 1 ;IYPRL = 10000
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP
```