TALK=T;RUN(1,1)
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Axi-symmetrical heat-conduction.        )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 10
 XULAST =1.32
 XFRAC(1)=0.1 ;XFRAC(2)=0.2
 XFRAC(3)=0.3 ;XFRAC(4)=0.4
 XFRAC(5)=0.5 ;XFRAC(6)=0.6
 XFRAC(7)=0.7 ;XFRAC(8)=0.8
 XFRAC(9)=0.9 ;XFRAC(10)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 10
 YVLAST =1.32
 YFRAC(1)=0.1 ;YFRAC(2)=0.2
 YFRAC(3)=0.3 ;YFRAC(4)=0.4
 YFRAC(5)=0.5 ;YFRAC(6)=0.6
 YFRAC(7)=0.7 ;YFRAC(8)=0.8
 YFRAC(9)=0.9 ;YFRAC(10)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =0.2
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(145)=PRPS ;NAME(146)=TEM1
 NAME(147)=T1/T ;NAME(148)=DEN1
 NAME(149)=T1TH ;NAME(150)=KOND
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(PRPS,Y,N,N,N,N,N)
 SOLUTN(TEM1,Y,Y,Y,N,N,Y)
 SOLUTN(T1/T,Y,N,N,N,N,N)
 SOLUTN(DEN1,Y,N,N,N,N,Y)
 SOLUTN(T1TH,Y,N,N,N,N,N)
 SOLUTN(KOND,Y,N,N,N,N,Y)
 DEN1 = 148
 PRPS = 145
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(TEM1,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 USP = T ; USPDBG= F
 UTCPLT = F ; USPIMB= F
 UAUTO = T ; UGTGRD= F
 USPVTK = T ; USPTER= F
 USCANX = T ; USCANY= T
 USCANZ = T
 MXLEV = 0 ;MYLEV = 0 ;MZLEV = 0
 DOMAT = -1
 CELLST = 10 ; FACEST= 10
 MINPRP = -1 ; MAXPRP= 250
 UMXLEV = 2 ; UMXCLS= 10000
 UNOLAY = 2 ; UIOLEV= 2
 UWALEV = 2 ; UGRITR= 2
 UMXCRS = 16
 USPREL =0.7 ; UMNCEL=1.
 UDVREL =1.
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =0. ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =273.
 PRESS0 =1.01325E+05
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1. ;ENUT =0.
 PRNDTL(TEM1)=-1.
 PRT(TEM1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(PRPS)=-1. ;FIINIT(TEM1)=1.0E-10
 FIINIT(T1/T)=1.0E-10 ;FIINIT(DEN1)=1.0E-10
 FIINIT(T1TH)=1.0E-10 ;FIINIT(KOND)=1.0E-10
 
 PATCH(^OB1 ,INIVAL, 1, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB1 ,PRPS,0. ,198. )
 
 PATCH(^OB2 ,INIVAL, 2, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB2 ,PRPS,0. ,198. )
 
 PATCH(^OB3 ,INIVAL, 3, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB3 ,PRPS,0. ,198. )
 
 PATCH(^OB4 ,INIVAL, 4, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB4 ,PRPS,0. ,198. )
 
 PATCH(^OB5 ,INIVAL, 5, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB5 ,PRPS,0. ,198. )
 
 PATCH(^OB6 ,INIVAL, 6, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB6 ,PRPS,0. ,198. )
 
 PATCH(^OB7 ,INIVAL, 7, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB7 ,PRPS,0. ,198. )
 
 PATCH(^OB8 ,INIVAL, 8, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB8 ,PRPS,0. ,198. )
 
 PATCH(^OB9 ,INIVAL, 9, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB9 ,PRPS,0. ,198. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(^INF1 ,VOLUME, 1, 0, 0, 0, 0, 0, 1, 1)
 COVAL(^INF1 ,TEM1,In-Form:source - see Grp 19)
 
 PATCH(^INF2 ,VOLUME, 2, 0, 0, 0, 0, 0, 1, 1)
 COVAL(^INF2 ,TEM1,In-Form:source - see Grp 19)
 
 PATCH(^INF3 ,VOLUME, 4, 0, 0, 0, 0, 0, 1, 1)
 COVAL(^INF3 ,TEM1,In-Form:source - see Grp 19)
 
 PATCH(^INF4 ,VOLUME, 3, 0, 0, 0, 0, 0, 1, 1)
 COVAL(^INF4 ,TEM1,In-Form:source - see Grp 19)
 
 PATCH(^INF5 ,VOLUME, 5, 0, 0, 0, 0, 0, 1, 1)
 COVAL(^INF5 ,TEM1,In-Form:source - see Grp 19)
 
 PATCH(^INF6 ,VOLUME, 7, 0, 0, 0, 0, 0, 1, 1)
 COVAL(^INF6 ,TEM1,In-Form:source - see Grp 19)
 
 PATCH(^INF7 ,VOLUME, 6, 0, 0, 0, 0, 0, 1, 1)
 COVAL(^INF7 ,TEM1,In-Form:source - see Grp 19)
 
 PATCH(^INF8 ,VOLUME, 9, 0, 0, 0, 0, 0, 1, 1)
 COVAL(^INF8 ,TEM1,In-Form:source - see Grp 19)
 
 PATCH(^INF9 ,VOLUME, 8, 0, 0, 0, 0, 0, 1, 1)
 COVAL(^INF9 ,TEM1,In-Form:source - see Grp 19)
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 100 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-09
 ************************************************************
  Group 16. Terminate Iterations
 LITER(TEM1)=20
 ENDIT(TEM1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(PRPS,LINRLX,1.)
 RELAX(TEM1,FALSDT,1.0E+09)
 RELAX(T1/T,LINRLX,1.)
 RELAX(DEN1,LINRLX,1.)
 RELAX(T1TH,LINRLX,1.)
 RELAX(KOND,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(TEM1)=3000. ;VARMIN(TEM1)=-204.75
 VARMAX(T1/T)=1.0E+10 ;VARMIN(T1/T)=-1.0E+10
 VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
 VARMAX(T1TH)=1.0E+10 ;VARMIN(T1TH)=-1.0E+10
 VARMAX(KOND)=1.0E+10 ;VARMIN(KOND)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 CONWIZ = T
 ISG62 = 1
 SPEDAT(SET,USPAGG,CRIFRAC,R,0.1)
 SPEDAT(SET,USP,METHOD,I,2)
 SPEDAT(SET,USPVTK,GRADOUT,C,TEM1)
 SPEDAT(SET,USPIO,VERTCENT,L,F)
 SPEDAT(SET,AUTOMESH,OLD-Z,L,T)
 SPEDAT(SET,STORED,T1TH,C,=1.+2.*0.6*LOGE(SQRT((XG-0.66)^2+(YG-0.6$)
 SPEDAT(SET,STORED,T1TH,C,6)^2)/0.15)!ZSLFIN)
 SPEDAT(SET,STORED,T1/T,C,=TEM1/T1TH!ZSLFIN)
 SPEDAT(SET,SOURCE,TEM1!IN,C,=1.!FIXV)
 SPEDAT(SET,SOURCE,TEM1!B_EN,C,=2.!FIXFLU)
 SPEDAT(SET,SOURCE,TEM1!B_ES,C,=2.!FIXFLU)
 SPEDAT(SET,SOURCE,TEM1!B_WN,C,=2.!FIXFLU)
 SPEDAT(SET,SOURCE,TEM1!B_WS,C,=2.!FIXFLU)
 SPEDAT(SET,SOURCE,TEM1!BE,C,=2.!FIXFLU)
 SPEDAT(SET,SOURCE,TEM1!BW,C,=2.!FIXFLU)
 SPEDAT(SET,SOURCE,TEM1!BN,C,=2.!FIXFLU)
 SPEDAT(SET,SOURCE,TEM1!BS,C,=2.!FIXFLU)
 SPEDAT(SET,OBJNAM,^OB1,C,IN)
 SPEDAT(SET,OBJTYP,^OB1,C,BLOCKAGE)
 SPEDAT(SET,IN,MATERIAL,R,198.)
 SPEDAT(SET,OBJNAM,^OB2,C,B_EN)
 SPEDAT(SET,OBJTYP,^OB2,C,BLOCKAGE)
 SPEDAT(SET,B_EN,MATERIAL,R,198.)
 SPEDAT(SET,OBJNAM,^OB3,C,B_WN)
 SPEDAT(SET,OBJTYP,^OB3,C,BLOCKAGE)
 SPEDAT(SET,B_WN,MATERIAL,R,198.)
 SPEDAT(SET,OBJNAM,^OB4,C,B_ES)
 SPEDAT(SET,OBJTYP,^OB4,C,BLOCKAGE)
 SPEDAT(SET,B_ES,MATERIAL,R,198.)
 SPEDAT(SET,OBJNAM,^OB5,C,B_WS)
 SPEDAT(SET,OBJTYP,^OB5,C,BLOCKAGE)
 SPEDAT(SET,B_WS,MATERIAL,R,198.)
 SPEDAT(SET,OBJNAM,^OB6,C,BW)
 SPEDAT(SET,OBJTYP,^OB6,C,BLOCKAGE)
 SPEDAT(SET,BW,MATERIAL,R,198.)
 SPEDAT(SET,OBJNAM,^OB7,C,BE)
 SPEDAT(SET,OBJTYP,^OB7,C,BLOCKAGE)
 SPEDAT(SET,BE,MATERIAL,R,198.)
 SPEDAT(SET,OBJNAM,^OB8,C,BS)
 SPEDAT(SET,OBJTYP,^OB8,C,BLOCKAGE)
 SPEDAT(SET,BS,MATERIAL,R,198.)
 SPEDAT(SET,OBJNAM,^OB9,C,BN)
 SPEDAT(SET,OBJTYP,^OB9,C,BLOCKAGE)
 SPEDAT(SET,BN,MATERIAL,R,198.)
 SPEDAT(SET,FACETDAT,NUMOBJ,I,9)
 SPEDAT(SET,OBJNAM,^INF1,C,IN)
 SPEDAT(SET,OBJTYP,^INF1,C,BLOCKAGE)
 SPEDAT(SET,OBJNAM,^INF2,C,B_EN)
 SPEDAT(SET,OBJTYP,^INF2,C,BLOCKAGE)
 SPEDAT(SET,OBJNAM,^INF3,C,B_ES)
 SPEDAT(SET,OBJTYP,^INF3,C,BLOCKAGE)
 SPEDAT(SET,OBJNAM,^INF4,C,B_WN)
 SPEDAT(SET,OBJTYP,^INF4,C,BLOCKAGE)
 SPEDAT(SET,OBJNAM,^INF5,C,B_WS)
 SPEDAT(SET,OBJTYP,^INF5,C,BLOCKAGE)
 SPEDAT(SET,OBJNAM,^INF6,C,BE)
 SPEDAT(SET,OBJTYP,^INF6,C,BLOCKAGE)
 SPEDAT(SET,OBJNAM,^INF7,C,BW)
 SPEDAT(SET,OBJTYP,^INF7,C,BLOCKAGE)
 SPEDAT(SET,OBJNAM,^INF8,C,BN)
 SPEDAT(SET,OBJTYP,^INF8,C,BLOCKAGE)
 SPEDAT(SET,OBJNAM,^INF9,C,BS)
 SPEDAT(SET,OBJTYP,^INF9,C,BLOCKAGE)
 SPEDAT(SET,MATERIAL,198,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
 OUTPUT(T1/T,Y,N,Y,N,N,N)
 OUTPUT(DEN1,Y,N,Y,N,N,N)
 OUTPUT(T1TH,Y,N,Y,N,N,N)
 OUTPUT(KOND,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 5 ;IYMON = 4 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP