TALK=T;RUN(1,1)
  PHOTON USE
  p;;;;;

  up z
  msg grid
  gr x 1
  msg Press  to continue
  pause;  cl
  msg 1st-phase (liquid) velocity vectors
  set vec ref;0.5;vec x 1 sh;  gr ou x 1
  msg Press  to continue
  pause;  cl
  msg 2nd-phase (solid) velocity vectors
    set vec comp;  - v2 e2;  vec x 1 sh;  gr ou x 1
  msg Press  to continue
  pause ;  cl
  msg contour of pressure
  con p1 x 1 fi;0.002;  gr ou x 1
  msg Press  to continue
  pause;  cl
  msg contour of 1st-phase (liquid) volume fraction
  con r1 x 1 fi;0.002;  gr ou x 1
  msg Press  to continue
  pause;  cl
  msg contour of soluble material concentration
  con c1 x 1 fi;0.002;  gr ou x 1
  msg Press  to continue
  pause;  cl
  msg contour of 1st-phase (liquid) enthalpy
  con liqt x 1 fi;0.002;  gr ou x 1
  msg Press  to continue
  pause;  cl
  msg contour of 2nd-phase (solid) enthalpy
  con solt x 1 fi;0.002;  gr ou x 1
  msg Press e to END
  enduse
  DISPLAY
    * A finely-divided solid is supposed to be uniformly
      distributed within a liquid, which is at rest in a
      cylindrical container, of diameter 1  meter and height 1
      meter. The particles and liquid are at different
      temperatures; and the particles are soluble in the liquid.
    * A paddle wheel, situated on the axis near the floor
      of the tank, is suddenly set in motion.
    * The subsequent motions of the liquid and of the particles
      are computed, together with their changes in temperature,
      and the increase in concentration of the soluble material in
      the liquid.
    * Three runs are set up, with varying paddle speed. It is
      suggested that a series of runs should be performed, showing
      the influences on the rate of dissolution of, for example:-
      * the paddle speed;    * the paddle size;
      * the density ratio between solid and liquid;
      * the various factors influencing the transfer
        rates of heat, mass and momentum between the
        particles and their surroundings;etc.
    Note that 100 sweeps per time step are needed for convergence.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(STIRRED TANK; RUN3  NO STIRRING :   W920)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 919
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =10.
 FSTEP = 1 ;LSTEP = 10
 TFRAC(1)=0.1 ;TFRAC(2)=0.2
 TFRAC(3)=0.3 ;TFRAC(4)=0.4
 TFRAC(5)=0.5 ;TFRAC(6)=0.6
 TFRAC(7)=0.7 ;TFRAC(8)=0.8
 TFRAC(9)=0.9 ;TFRAC(10)=1.
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = F
 NX = 1
 XULAST =0.1
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 10
 YVLAST =0.5
 YFRAC(1)=0.1 ;YFRAC(3)=0.3
 YFRAC(5)=0.5 ;YFRAC(7)=0.7
 YFRAC(9)=0.9
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 10
 ZWLAST =1.
 ZFRAC(1)=0.1 ;ZFRAC(2)=0.2
 ZFRAC(3)=0.3 ;ZFRAC(4)=0.4
 ZFRAC(5)=0.5 ;ZFRAC(6)=0.6
 ZFRAC(7)=0.7 ;ZFRAC(8)=0.8
 ZFRAC(9)=0.9 ;ZFRAC(10)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = F
 EQUVEL = F
 NAME(1)=P1 ;NAME(3)=U1
 NAME(4)=U2 ;NAME(5)=V1
 NAME(6)=V2 ;NAME(7)=W1
 NAME(8)=E2 ;NAME(9)=R1
 NAME(10)=R2 ;NAME(14)=LIQT
 NAME(15)=SOLT ;NAME(16)=C1
 NAME(17)=D2 ;NAME(150)=MDOT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(U2,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(V2,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(E2,Y,Y,N,N,N,Y)
 SOLUTN(R1,Y,Y,N,N,N,Y)
 SOLUTN(R2,Y,Y,N,N,N,Y)
 SOLUTN(LIQT,Y,Y,N,N,N,Y)
 SOLUTN(SOLT,Y,Y,N,N,N,Y)
 SOLUTN(C1,Y,Y,N,N,N,Y)
 SOLUTN(D2,Y,Y,N,N,N,Y)
 SOLUTN(MDOT,Y,N,N,N,N,Y)
 INTMDT = 150
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(U2,Y,Y,Y,Y,N,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(V2,Y,Y,Y,Y,N,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(E2,Y,Y,Y,Y,N,Y)
 TERMS(R1,Y,Y,Y,Y,Y,Y)
 TERMS(R2,Y,Y,Y,Y,N,Y)
 TERMS(LIQT,Y,Y,Y,Y,Y,Y)
 TERMS(SOLT,Y,Y,Y,Y,N,Y)
 TERMS(C1,N,Y,Y,Y,Y,Y)
 TERMS(D2,N,Y,Y,Y,N,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 EQDVDP = F
 HUNIT =1.
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1000. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 RHO2 =2000. ;TMP2 =0. ;EL2 =0.
 DVO2DT =0. ;DRH2DP =0.
 ENUL =1.0E-02 ;ENUT =0.
 PHINT(U1)=-2.022E+04 ;PHINT(U2)=-2.022E+04
 PHINT(V1)=-2.022E+04 ;PHINT(V2)=-2.022E+04
 PHINT(W1)=-2.022E+04 ;PHINT(E2)=-2.022E+04
 PHINT(R1)=-2.022E+04 ;PHINT(R2)=-2.022E+04
 PHINT(LIQT)=-2.022E+04 ;PHINT(SOLT)=-2.022E+04
 PHINT(C1)=1. ;PHINT(D2)=1.
 PRNDTL(U1)=1. ;PRNDTL(U2)=1.
 PRNDTL(V1)=1. ;PRNDTL(V2)=1.
 PRNDTL(W1)=1. ;PRNDTL(E2)=1.
 PRNDTL(R1)=1. ;PRNDTL(R2)=1.
 PRNDTL(LIQT)=5. ;PRNDTL(SOLT)=1.
 PRNDTL(C1)=1. ;PRNDTL(D2)=1.
 PRT(U1)=1. ;PRT(U2)=1.
 PRT(V1)=1. ;PRT(V2)=1.
 PRT(W1)=1. ;PRT(E2)=1.
 PRT(R1)=1. ;PRT(R2)=1.
 PRT(LIQT)=1. ;PRT(SOLT)=1.
 PRT(C1)=1. ;PRT(D2)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 CFIPS = GRND2
 RLOLIM =0. ;CMDOT =1.0E-04
 CFIPA =1.0E-02 ;CFIPB =0.
 CFIPC =1.0E+04 ;CFIPD =0.
 CINT(P1)=1. ;CINT(U1)=1.
 CINT(U2)=1. ;CINT(V1)=1.
 CINT(V2)=1. ;CINT(W1)=1.
 CINT(E2)=1. ;CINT(R1)=1.
 CINT(R2)=1. ;CINT(LIQT)=1.0E-02
 CINT(SOLT)=1.0E-03 ;CINT(C1)=0.
 CINT(D2)=0.
 PHINT(P1)=-2.022E+04 ;PHINT(U1)=-2.022E+04
 PHINT(U2)=-2.022E+04 ;PHINT(V1)=-2.022E+04
 PHINT(V2)=-2.022E+04 ;PHINT(W1)=-2.022E+04
 PHINT(E2)=-2.022E+04 ;PHINT(R1)=-2.022E+04
 PHINT(R2)=-2.022E+04 ;PHINT(LIQT)=-2.022E+04
 PHINT(SOLT)=-2.022E+04 ;PHINT(C1)=1.
 PHINT(D2)=1.
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=0.
 FIINIT(U2)=0. ;FIINIT(V1)=1.0E-10
 FIINIT(V2)=1.0E-10 ;FIINIT(W1)=1.0E-10
 FIINIT(E2)=1.0E-10 ;FIINIT(R1)=0.99
 FIINIT(R2)=1.0E-02 ;FIINIT(LIQT)=0.
 FIINIT(SOLT)=1. ;FIINIT(C1)=0.
 FIINIT(D2)=1. ;FIINIT(MDOT)=0.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(CYLWALL ,NWALL , 1, 1, 10, 10, 1, 10, 1, 10)
 COVAL(CYLWALL ,U1 ,1. ,0. )
 COVAL(CYLWALL ,U2 ,1. ,0. )
 COVAL(CYLWALL ,W1 ,1. ,0. )
 COVAL(CYLWALL ,E2 ,1. ,0. )
 
 PATCH(TOP ,HWALL , 1, 1, 1, 10, 10, 10, 1, 10)
 COVAL(TOP ,U1 ,1. ,0. )
 COVAL(TOP ,U2 ,1. ,0. )
 COVAL(TOP ,V1 ,1. ,0. )
 COVAL(TOP ,V2 ,1. ,0. )
 
 PATCH(BOTTOM ,LWALL , 1, 1, 1, 10, 1, 1, 1, 10)
 COVAL(BOTTOM ,U1 ,1. ,0. )
 COVAL(BOTTOM ,U2 ,1. ,0. )
 COVAL(BOTTOM ,V1 ,1. ,0. )
 COVAL(BOTTOM ,V2 ,1. ,0. )
 
 PATCH(PRELIEF ,HIGH , 1, 1, 10, 10, 10, 10, 1, 100)
 COVAL(PRELIEF ,R1 ,1. ,0. )
 COVAL(PRELIEF ,LIQT,0. ,0. )
 COVAL(PRELIEF ,C1 ,0. ,0. )
 
 PATCH(PADDLE ,CELL , 1, 1, 5, 5, 1, 2, 1, 10)
 COVAL(PADDLE ,U1 , FIXVAL ,0. )
 
 PATCH(GRAVITY ,PHASEM, 1, 1, 1, 10, 1, 10, 1, 10)
 COVAL(GRAVITY ,W1 , FIXFLU ,-9.81 )
 COVAL(GRAVITY ,E2 , FIXFLU ,-9.81 )
 IURVAL = -1
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 20 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 ISWR1 = 1 ;ISWR2 = 10000
 SELREF = T
 RESFAC =0.1
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(U2)=10 ;LITER(V1)=10
 LITER(V2)=10 ;LITER(W1)=10
 LITER(E2)=10 ;LITER(R1)=1
 LITER(R2)=1 ;LITER(LIQT)=20
 LITER(SOLT)=20 ;LITER(C1)=20
 LITER(D2)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(U2)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(V2)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ENDIT(E2)=1.0E-03 ;ENDIT(R1)=1.0E-03
 ENDIT(R2)=1.0E-03 ;ENDIT(LIQT)=1.0E-03
 ENDIT(SOLT)=1.0E-03 ;ENDIT(C1)=1.0E-03
 ENDIT(D2)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,0.010194)
 RELAX(U2,FALSDT,0.010194)
 RELAX(V1,FALSDT,0.010194)
 RELAX(V2,FALSDT,0.010194)
 RELAX(W1,FALSDT,0.010194)
 RELAX(E2,FALSDT,0.010194)
 RELAX(R1,LINRLX,0.75)
 RELAX(R2,LINRLX,0.75)
 RELAX(LIQT,FALSDT,1.0E+09)
 RELAX(SOLT,FALSDT,1.0E+09)
 RELAX(C1,FALSDT,1.0E+09)
 RELAX(D2,FALSDT,1.0E+09)
 RELAX(MDOT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(U2)=1.0E+06 ;VARMIN(U2)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(V2)=1.0E+06 ;VARMIN(V2)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(E2)=1.0E+06 ;VARMIN(E2)=-1.0E+06
 VARMAX(R1)=1. ;VARMIN(R1)=1.0E-06
 VARMAX(R2)=1. ;VARMIN(R2)=1.0E-06
 VARMAX(LIQT)=1.0E+10 ;VARMIN(LIQT)=-1.0E+10
 VARMAX(SOLT)=1.0E+10 ;VARMIN(SOLT)=-1.0E+10
 VARMAX(C1)=1.0E+10 ;VARMIN(C1)=-1.0E+10
 VARMAX(D2)=1.0E+10 ;VARMIN(D2)=-1.0E+10
 VARMAX(MDOT)=1.0E+10 ;VARMIN(MDOT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,TRANSIENT,L,F)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 IURPRN = -1
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(U2,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(V2,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(E2,Y,N,Y,Y,Y,Y)
 OUTPUT(R1,N,Y,Y,Y,Y,Y)
 OUTPUT(R2,Y,N,Y,Y,Y,Y)
 OUTPUT(LIQT,Y,N,Y,Y,Y,Y)
 OUTPUT(SOLT,Y,N,Y,Y,Y,Y)
 OUTPUT(C1,Y,N,Y,Y,Y,Y)
 OUTPUT(D2,Y,N,Y,Y,Y,Y)
 OUTPUT(MDOT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 9 ;IZMON = 9
 NPRMON = 20 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 100000 ;ISTPRF = 1 ;ISTPRL = 100000
 NYPRIN = 2 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(MAP ,CONTUR, 1, 1, 1, 10, 1, 10, 1, 10)
 PLOT(MAP ,U1 ,0. ,10. )
 PLOT(MAP ,V1 ,0. ,10. )
 PLOT(MAP ,W1 ,0. ,10. )
 PLOT(MAP ,E2 ,0. ,10. )
 PLOT(MAP ,R2 ,0. ,10. )
 PLOT(MAP ,LIQT,0. ,10. )
 PLOT(MAP ,SOLT,0. ,10. )
 PLOT(MAP ,C1 ,0. ,10. )
 PLOT(MAP ,MDOT,0. ,10. )
 
 PATCH(IZEQNZM1,PROFIL, 1, 1, 1, 10, 9, 9, 1, 10)
 PLOT(IZEQNZM1,W1 ,0. ,0. )
 PLOT(IZEQNZM1,E2 ,0. ,0. )
 
 PATCH(IZEQNZD2,PROFIL, 1, 1, 1, 10, 1, 5, 1, 10)
 PLOT(IZEQNZD2,W1 ,-1. ,-1. )
 PLOT(IZEQNZD2,E2 ,-1. ,-1. )
 PLOT(IZEQNZD2,R2 ,0. ,0. )
 
 PATCH(TIMEPLOT,PROFIL, 1, 1, 5, 5, 5, 5, 1, 10)
 PLOT(TIMEPLOT,U1 ,0. ,0. )
 PLOT(TIMEPLOT,V1 ,0. ,0. )
 PLOT(TIMEPLOT,W1 ,0. ,0. )
 PLOT(TIMEPLOT,R2 ,0. ,0. )
 PLOT(TIMEPLOT,LIQT,-2. ,-2. )
 PLOT(TIMEPLOT,SOLT,-2. ,-2. )
 PLOT(TIMEPLOT,C1 ,0. ,0. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP