TALK=T;RUN(1,1)
DISPLAY
This case simulates the steady flow of a two-phase mixture in a
2-D duct, with heated walls.
The mixture has uniform composition at inlet; but the distribution
changes with distance downstream, for two reasons, namely:-
1. the denser fluid moves to the outside of the bends; and
2. dense fluid changes into light, through boiling near the
heated walls.
You may determine whether the activate both effects by your answer
the following question.
This Q1 contains PHOTON USE commands.
ENDDIS
photon use
p;;;
gr x 1
msg dense-phase volume-fraction contours
con r1 x 1 fi;0.1
msg press return for dense-phase ucrt
pause; con off; red
msg dense-phase ucrt
con vcrt x 1 fi;0.1
msg press return for dense-phase wcrt
pause; con off; red
msg dense-phase wcrt
con wcrt x 1 fi;0.1
msg press return for p1
pause; con off; red
msg pressure
con p1 x 1 fi;0.1
msg press return for dense-phase velocity vectors
pause; con off; red; gr off;gr ou x 1; red; vec x 1 sh
enduse
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(Boiling 2-Phase Flow in S-bend Duct:W886)
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 14
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 1
XULAST =0.1
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 10
YVLAST =0.3
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 38
ZWLAST =1.
************************************************************
Group 6. Body-Fitted Coordinates
BFC = T ;NONORT = T
NCRT = -1
RSTGEO = F ;SAVGEO = F
UUP = F ;VUP = F ;WUP = T
NGEOM =CHAM
NAMXYZ =CHAM
ANGMIN =20.
DOMAIN( 1, 2, 1, 11, 1, 39)
* Set fixed sub-domain
FIXDOM( 1, 0, 0, 0, 0, 0, 0)
FIXDOM( 2, 0, 0, 0, 0, 0, 0)
FIXDOM( 3, 0, 0, 0, 0, 0, 0)
FIXDOM( 4, 0, 0, 0, 0, 0, 0)
FIXDOM( 5, 0, 0, 0, 0, 0, 0)
FIXDOM( 6, 0, 0, 0, 0, 0, 0)
FIXDOM( 7, 0, 0, 0, 0, 0, 0)
FIXDOM( 8, 0, 0, 0, 0, 0, 0)
FIXDOM( 9, 0, 0, 0, 0, 0, 0)
FIXDOM( 10, 0, 0, 0, 0, 0, 0)
LIJ = F ;LJK = T ;LIK = F
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = F
EQUVEL = F
NAME(1)=P1 ;NAME(5)=V1
NAME(6)=V2 ;NAME(7)=W1
NAME(8)=W2 ;NAME(9)=R1
NAME(10)=R2 ;NAME(14)=H1
NAME(15)=H2 ;NAME(144)=MDOT
NAME(145)=W2CR ;NAME(146)=V2CR
NAME(147)=U2CR ;NAME(148)=WCRT
NAME(149)=VCRT ;NAME(150)=UCRT
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,Y,N,N,N)
SOLUTN(V1,Y,Y,N,N,N,N)
SOLUTN(V2,Y,Y,N,N,N,N)
SOLUTN(W1,Y,Y,N,N,N,N)
SOLUTN(W2,Y,Y,N,N,N,N)
SOLUTN(R1,Y,Y,N,N,N,N)
SOLUTN(R2,Y,Y,N,N,N,N)
SOLUTN(H1,Y,N,N,N,N,N)
SOLUTN(H2,Y,N,N,N,N,N)
SOLUTN(MDOT,Y,N,N,N,N,Y)
SOLUTN(W2CR,Y,N,N,N,N,N)
SOLUTN(V2CR,Y,N,N,N,N,N)
SOLUTN(U2CR,Y,N,N,N,N,N)
SOLUTN(WCRT,Y,N,N,N,N,N)
SOLUTN(VCRT,Y,N,N,N,N,N)
SOLUTN(UCRT,Y,N,N,N,N,N)
INTMDT = 144
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
TERMS(V2,Y,Y,Y,Y,N,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
TERMS(W2,Y,Y,Y,Y,N,Y)
TERMS(R1,Y,Y,Y,Y,Y,Y)
TERMS(R2,Y,Y,Y,Y,N,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
EQDVDP = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =750. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
RHO2 =36. ;TMP2 =0. ;EL2 =0.
DVO2DT =0. ;DRH2DP =0.
ENUL =1.0E-04 ;ENUT =0.05
PHINT(V1)=-2.022E+04 ;PHINT(V2)=-2.022E+04
PHINT(W1)=-2.022E+04 ;PHINT(W2)=-2.022E+04
PHINT(R1)=-2.022E+04 ;PHINT(R2)=-2.022E+04
PRNDTL(V1)=1. ;PRNDTL(V2)=1.
PRNDTL(W1)=1. ;PRNDTL(W2)=1.
PRNDTL(R1)=1. ;PRNDTL(R2)=1.
PRT(V1)=1. ;PRT(V2)=1.
PRT(W1)=1. ;PRT(W2)=1.
PRT(R1)=1. ;PRT(R2)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
CFIPS =100.
RLOLIM =0. ;CMDOT = HEATBL
CINT(P1)=1. ;CINT(V1)=1.
CINT(V2)=1. ;CINT(W1)=1.
CINT(W2)=1. ;CINT(R1)=1.
CINT(R2)=1.
PHINT(P1)=-2.022E+04 ;PHINT(V1)=-2.022E+04
PHINT(V2)=-2.022E+04 ;PHINT(W1)=-2.022E+04
PHINT(W2)=-2.022E+04 ;PHINT(R1)=-2.022E+04
PHINT(R2)=-2.022E+04
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
FIINIT(V2)=1.0E-10 ;FIINIT(W1)=1.
FIINIT(W2)=1. ;FIINIT(R1)=0.99
FIINIT(R2)=9.99999E-03 ;FIINIT(H1)=4.0E+05
FIINIT(H2)=2.5E+06 ;FIINIT(MDOT)=1.0E-10
FIINIT(W2CR)=1.0E-10 ;FIINIT(V2CR)=1.0E-10
FIINIT(U2CR)=1.0E-10 ;FIINIT(WCRT)=1.0E-10
FIINIT(VCRT)=1.0E-10 ;FIINIT(UCRT)=1.0E-10
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(INLET ,LOW , 1, 1, 1, 10, 1, 1, 1, 1)
COVAL(INLET ,V1 ,0. ,0. )
COVAL(INLET ,V2 ,0. ,0. )
COVAL(INLET ,W1 ,0. ,1. )
COVAL(INLET ,W2 ,0. ,1. )
COVAL(INLET ,R1 , FIXFLU ,742.5 )
COVAL(INLET ,R2 , FIXFLU ,0.36 )
COVAL(INLET ,H1 ,0. ,4.0E+05 )
COVAL(INLET ,H2 ,0. ,2.5E+06 )
PATCH(OUTLET ,HIGH , 1, 1, 1, 10, 38, 38, 1, 1)
COVAL(OUTLET ,R1 ,7.5E+05 ,0. )
COVAL(OUTLET ,R2 ,3.6E+04 ,0. )
COVAL(OUTLET ,H1 ,0. , SAME )
COVAL(OUTLET ,H2 ,0. , SAME )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 200 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
ISWR1 = 1 ;ISWR2 = 10000
SELREF = T
RESFAC =0.1
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(V1)=10
LITER(V2)=10 ;LITER(W1)=10
LITER(W2)=10 ;LITER(R1)=1
LITER(R2)=1
ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
ENDIT(V2)=1.0E-03 ;ENDIT(W1)=1.0E-03
ENDIT(W2)=1.0E-03 ;ENDIT(R1)=1.0E-03
ENDIT(R2)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,0.5)
RELAX(V1,FALSDT,0.016667)
RELAX(V2,FALSDT,0.016667)
RELAX(W1,FALSDT,1.666667)
RELAX(W2,FALSDT,1.666667)
RELAX(R1,LINRLX,0.4)
RELAX(R2,LINRLX,0.4)
RELAX(H1,LINRLX,1.666667)
RELAX(H2,LINRLX,1.666667)
RELAX(MDOT,LINRLX,0.5)
RELAX(W2CR,LINRLX,1.)
RELAX(V2CR,LINRLX,1.)
RELAX(U2CR,LINRLX,1.)
RELAX(WCRT,LINRLX,1.)
RELAX(VCRT,LINRLX,1.)
RELAX(UCRT,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(V2)=1.0E+06 ;VARMIN(V2)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(W2)=1.0E+06 ;VARMIN(W2)=-1.0E+06
VARMAX(R1)=1. ;VARMIN(R1)=1.0E-06
VARMAX(R2)=1. ;VARMIN(R2)=1.0E-06
VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
VARMAX(H2)=1.0E+10 ;VARMIN(H2)=-1.0E+10
VARMAX(MDOT)=1.0E+10 ;VARMIN(MDOT)=-1.0E+10
VARMAX(W2CR)=1.0E+10 ;VARMIN(W2CR)=-1.0E+10
VARMAX(V2CR)=1.0E+10 ;VARMIN(V2CR)=-1.0E+10
VARMAX(U2CR)=1.0E+10 ;VARMIN(U2CR)=-1.0E+10
VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,GXMONI,PLOTALL,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(V1,Y,N,Y,Y,Y,Y)
OUTPUT(V2,Y,N,Y,Y,Y,Y)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(W2,Y,N,Y,Y,Y,Y)
OUTPUT(R1,Y,N,Y,Y,Y,Y)
OUTPUT(R2,Y,N,Y,Y,Y,Y)
OUTPUT(H1,Y,N,Y,Y,Y,Y)
OUTPUT(H2,Y,N,Y,Y,Y,Y)
OUTPUT(MDOT,Y,N,Y,N,N,N)
OUTPUT(W2CR,Y,N,Y,N,N,N)
OUTPUT(V2CR,Y,N,Y,N,N,N)
OUTPUT(U2CR,Y,N,Y,N,N,N)
OUTPUT(WCRT,Y,N,Y,N,N,N)
OUTPUT(VCRT,Y,N,Y,N,N,N)
OUTPUT(UCRT,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 5 ;IZMON = 32
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP