TALK=T;RUN(1,1)
  PHOTON USE
  p
  phi



  msg grid
  gr x 1
  msg Press  to continue
  pause
  cl
  msg 1st-phase (light phase) velocity vectors
  vec x 1 sh
  gr ou x 1
  msg Press  to continue
  pause
  cl
  msg 2nd-phase (dense phase) velocity vectors
  set vec comp
  - v2 w2
  vec x 1 sh
  gr ou x 1
  msg Press  to continue
  pause
  cl
  msg contour of pressure
  con p1 x 1 fi;0.002
  gr ou x 1
  msg Press  to continue
  pause
  cl
  msg contour of 1st-phase (light phase) volume fraction
  con r1 x 1 fi;0.002
  gr ou x 1
  msg Press  to continue
  pause
  cl
  msg contour of 1st-phase temperature
  con tmp1 x 1 fi;0.002
  gr ou x 1
  msg Press  to continue
  pause
  cl
  msg contour of 2nd-phase temperature
  con tmp2 x 1 fi;0.002
  gr ou x 1
  msg Press e to END
  enduse
  DISPLAY
   This case concerns plane, two-dimensional, incompressible
   two phase flow through a 180 degree turnaround duct. It
   is based on Library case b527.

   The gas enters at 300K, the particles at 600K. The wall
   surface temperature is 400k.

   The particle diameter is 1mm.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(2PHS FLOW IN TURNAROUND DUCT :      W578)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 10
 YVLAST =30.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 20
 ZWLAST =100.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = T
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = T
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1,   2,   1,  11,   1,  21)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = F
 EQUVEL = F
 NAME(1)=P1 ;NAME(5)=V1
 NAME(6)=V2 ;NAME(7)=W1
 NAME(8)=W2 ;NAME(9)=R1
 NAME(10)=R2 ;NAME(14)=H1
 NAME(15)=H2 ;NAME(142)=SIZE
 NAME(143)=TMP2 ;NAME(144)=TMP1
 NAME(145)=W2CR ;NAME(146)=V2CR
 NAME(147)=U2CR ;NAME(148)=WCRT
 NAME(149)=VCRT ;NAME(150)=UCRT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,N)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(V2,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(W2,Y,Y,N,N,N,Y)
 SOLUTN(R1,Y,Y,N,N,N,Y)
 SOLUTN(R2,Y,Y,N,N,N,Y)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 SOLUTN(H2,Y,Y,N,N,N,Y)
 SOLUTN(SIZE,Y,N,N,N,N,Y)
 SOLUTN(TMP2,Y,N,N,N,N,Y)
 SOLUTN(TMP1,Y,N,N,N,N,Y)
 SOLUTN(W2CR,Y,N,N,N,N,N)
 SOLUTN(V2CR,Y,N,N,N,N,N)
 SOLUTN(U2CR,Y,N,N,N,N,N)
 SOLUTN(WCRT,Y,N,N,N,N,N)
 SOLUTN(VCRT,Y,N,N,N,N,N)
 SOLUTN(UCRT,Y,N,N,N,N,N)
 TEMP1 = 144
 TEMP2 = 143
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(V2,Y,Y,Y,Y,N,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(W2,Y,Y,Y,Y,N,Y)
 TERMS(R1,Y,Y,Y,Y,Y,Y)
 TERMS(R2,Y,Y,Y,Y,N,Y)
 TERMS(H1,Y,Y,Y,Y,Y,Y)
 TERMS(H2,Y,Y,Y,Y,N,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 EQDVDP = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 = GRND2 ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 TMP1A =273. ;TMP1B =1.0E-03 ;TMP1C =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 RHO2 =2000. ;TMP2 = GRND2 ;EL2 =0.
 DVO2DT =0. ;DRH2DP =0.
 TMP2A =273. ;TMP2B =5.0E-04 ;TMP2C =0.
 ENUL =1.0E-05 ;ENUT =5.0E-03
 PHINT(V1)=-2.022E+04 ;PHINT(V2)=-2.022E+04
 PHINT(W1)=-2.022E+04 ;PHINT(W2)=-2.022E+04
 PHINT(R1)=-2.022E+04 ;PHINT(R2)=-2.022E+04
 PHINT(H1)=0.5 ;PHINT(H2)=-2.022E+04
 PRNDTL(V1)=1. ;PRNDTL(V2)=1.
 PRNDTL(W1)=1. ;PRNDTL(W2)=1.
 PRNDTL(R1)=1. ;PRNDTL(R2)=1.
 PRNDTL(H1)=1. ;PRNDTL(H2)=1.
 PRT(V1)=1. ;PRT(V2)=1.
 PRT(W1)=1. ;PRT(W2)=1.
 PRT(R1)=1. ;PRT(R2)=1.
 PRT(H1)=1. ;PRT(H2)=1.
 CP1 =1000. ;CP2 =2000.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 CFIPS = GRND7
 RLOLIM =0. ;CMDOT =0.
 CFIPA =1.0E-06 ;CFIPB =1.0E-03
 CFIPC =0. ;CFIPD =0.
 CINT(P1)=1. ;CINT(V1)=1.
 CINT(V2)=1. ;CINT(W1)=1.
 CINT(W2)=1. ;CINT(R1)=1.
 CINT(R2)=1. ;CINT(H1)=GRND7
 CINT(H2)=GRND7
 PHINT(P1)=-2.022E+04 ;PHINT(V1)=-2.022E+04
 PHINT(V2)=-2.022E+04 ;PHINT(W1)=-2.022E+04
 PHINT(W2)=-2.022E+04 ;PHINT(R1)=-2.022E+04
 PHINT(R2)=-2.022E+04 ;PHINT(H1)=0.5
 PHINT(H2)=-2.022E+04
 CINH1A =0. ;CINH1B =0. ;CINH1C =0.
 CINH2A =0. ;CINH2B =0. ;CINH2C =0.
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(V2)=1.0E-10 ;FIINIT(W1)=1.
 FIINIT(W2)=1. ;FIINIT(R1)=0.5
 FIINIT(R2)=0.5 ;FIINIT(H1)=1.0E-10
 FIINIT(H2)=1.0E-10 ;FIINIT(SIZE)=1.0E-10
 FIINIT(TMP2)=1.0E-10 ;FIINIT(TMP1)=1.0E-10
 FIINIT(W2CR)=1.0E-10 ;FIINIT(V2CR)=1.0E-10
 FIINIT(U2CR)=1.0E-10 ;FIINIT(WCRT)=1.0E-10
 FIINIT(VCRT)=1.0E-10 ;FIINIT(UCRT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(INLET ,LOW , 1, 1, 1, 10, 1, 1, 1, 1)
 COVAL(INLET ,V1 ,0. ,0. )
 COVAL(INLET ,V2 ,0. ,0. )
 COVAL(INLET ,W1 ,0. ,1. )
 COVAL(INLET ,W2 ,0. ,1. )
 COVAL(INLET ,R1 , FIXFLU ,0.9 )
 COVAL(INLET ,R2 , FIXFLU ,200. )
 COVAL(INLET ,H1 ,0. ,2.7E+04 )
 COVAL(INLET ,H2 ,0. ,6.54E+05 )
 
 PATCH(OUTLET ,HIGH , 1, 1, 1, 10, 20, 20, 1, 1)
 COVAL(OUTLET ,V1 ,0. ,0. )
 COVAL(OUTLET ,V2 ,0. ,0. )
 COVAL(OUTLET ,W1 ,0. ,0. )
 COVAL(OUTLET ,W2 ,0. ,0. )
 COVAL(OUTLET ,R1 ,10. ,0. )
 COVAL(OUTLET ,R2 ,2.0E+04 ,0. )
 COVAL(OUTLET ,H1 ,0. ,2.7E+04 )
 COVAL(OUTLET ,H2 ,0. ,5.4E+04 )
 
 PATCH(TOP ,NWALL , 1, 1, 10, 10, 1, 20, 1, 1)
 COVAL(TOP ,W1 , GRND2 ,0. )
 COVAL(TOP ,H1 , GRND2 ,1.27E+05 )
 
 PATCH(BOT ,SWALL , 1, 1, 1, 1, 1, 20, 1, 1)
 COVAL(BOT ,W1 , GRND2 ,0. )
 COVAL(BOT ,H1 , GRND2 ,1.27E+05 )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 250 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 ISWR1 = 1 ;ISWR2 = 10000
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(V2)=10 ;LITER(W1)=10
 LITER(W2)=10 ;LITER(R1)=1
 LITER(R2)=1 ;LITER(H1)=20
 LITER(H2)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(V2)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ENDIT(W2)=1.0E-03 ;ENDIT(R1)=1.0E-03
 ENDIT(R2)=1.0E-03 ;ENDIT(H1)=1.0E-03
 ENDIT(H2)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.75)
 RELAX(V1,FALSDT,10.)
 RELAX(V2,FALSDT,10.)
 RELAX(W1,FALSDT,10.)
 RELAX(W2,FALSDT,10.)
 RELAX(R1,LINRLX,0.8)
 RELAX(R2,LINRLX,0.8)
 RELAX(H1,LINRLX,0.5)
 RELAX(H2,LINRLX,0.5)
 RELAX(SIZE,LINRLX,1.)
 RELAX(TMP2,LINRLX,1.)
 RELAX(TMP1,LINRLX,1.)
 RELAX(W2CR,LINRLX,1.)
 RELAX(V2CR,LINRLX,1.)
 RELAX(U2CR,LINRLX,1.)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(V2)=1.0E+06 ;VARMIN(V2)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(W2)=1.0E+06 ;VARMIN(W2)=-1.0E+06
 VARMAX(R1)=1. ;VARMIN(R1)=1.0E-06
 VARMAX(R2)=1. ;VARMIN(R2)=1.0E-06
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 VARMAX(H2)=1.0E+10 ;VARMIN(H2)=-1.0E+10
 VARMAX(SIZE)=1.0E+10 ;VARMIN(SIZE)=-1.0E+10
 VARMAX(TMP2)=1.0E+10 ;VARMIN(TMP2)=-1.0E+10
 VARMAX(TMP1)=1.0E+10 ;VARMIN(TMP1)=-1.0E+10
 VARMAX(W2CR)=1.0E+10 ;VARMIN(W2CR)=-1.0E+10
 VARMAX(V2CR)=1.0E+10 ;VARMIN(V2CR)=-1.0E+10
 VARMAX(U2CR)=1.0E+10 ;VARMIN(U2CR)=-1.0E+10
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(V2,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(W2,Y,N,Y,Y,Y,Y)
 OUTPUT(R1,Y,N,Y,Y,Y,Y)
 OUTPUT(R2,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 OUTPUT(H2,Y,N,Y,Y,Y,Y)
 OUTPUT(SIZE,Y,N,Y,N,N,N)
 OUTPUT(TMP2,Y,N,Y,N,N,N)
 OUTPUT(TMP1,Y,N,Y,N,N,N)
 OUTPUT(W2CR,Y,N,Y,N,N,N)
 OUTPUT(V2CR,Y,N,Y,N,N,N)
 OUTPUT(U2CR,Y,N,Y,N,N,N)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 5 ;IZMON = 15
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP