TALK=T;RUN(1,1)
  PHOTON USE
  p
  phi
  10 1


  msg grid (scale enlarged 10 times in y direction)
  gr x 1
  msg Press  to continue
  pause
  cl
  msg 1st-phase (air) velocity vectors
  vec x 1 sh
  gr ou x 1
  msg Press  to continue
  pause
  cl
  msg 2nd-phase (liquid) velocity vectors
  set vec comp
  - v2 w2
  vec x 1 sh
  gr ou x 1
  msg Press  to continue
  pause
  cl
  msg contour of pressure
  con p1 x 1 fi;0.002
  gr ou x 1
  msg Press  to continue
  pause
  cl
  msg contour of 1st-phase (air) volume fraction
  con r1 x 1 fi;0.002
  gr ou x 1
  msg Press  to continue
  pause
  cl
  msg contour of 1st-phase (air) enthalpy
  con h1 x 1 fi;0.002
  gr ou x 1
  msg Press  to continue
  pause
  cl
  msg contour of 2nd-phase (liquid) enthalpy
  con h2 x 1 fi;0.002
  gr ou x 1
  msg Press e to END
  enduse
  DISPLAY
  This run examines a two-phase, fluid-solid flow in a pipe with an
  orifice at one quarter of the pipe length from the entrance. The
  pipe wall is held at constant temperature.
  Interesting variants include: changes to the mass-inflow rate;
  changes to the density of both phases; changes to the interphase
  friction coefficient; and addition of gravitational effects.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(AREA RESTRICTION AT QUARTER LENGTH: W371)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = F
 NX = 1
 XULAST =1.0E-02
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 20
 YVLAST =1.0E-02
 YFRAC(1)=0.05 ;YFRAC(2)=0.1
 YFRAC(3)=0.15 ;YFRAC(4)=0.2
 YFRAC(5)=0.25 ;YFRAC(6)=0.3
 YFRAC(7)=0.35 ;YFRAC(8)=0.4
 YFRAC(9)=0.45 ;YFRAC(10)=0.5
 YFRAC(11)=0.55 ;YFRAC(12)=0.6
 YFRAC(13)=0.65 ;YFRAC(14)=0.7
 YFRAC(15)=0.75 ;YFRAC(16)=0.8
 YFRAC(17)=0.85 ;YFRAC(18)=0.9
 YFRAC(19)=0.95 ;YFRAC(20)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 20
 ZWLAST =0.2
 ZFRAC(1)=0.05 ;ZFRAC(2)=0.1
 ZFRAC(3)=0.15 ;ZFRAC(4)=0.2
 ZFRAC(5)=0.25 ;ZFRAC(6)=0.3
 ZFRAC(7)=0.35 ;ZFRAC(8)=0.4
 ZFRAC(9)=0.45 ;ZFRAC(10)=0.5
 ZFRAC(11)=0.55 ;ZFRAC(12)=0.6
 ZFRAC(13)=0.65 ;ZFRAC(14)=0.7
 ZFRAC(15)=0.75 ;ZFRAC(16)=0.8
 ZFRAC(17)=0.85 ;ZFRAC(18)=0.9
 ZFRAC(19)=0.95 ;ZFRAC(20)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = F
 EQUVEL = F
 NAME(1)=P1 ;NAME(5)=V1
 NAME(6)=V2 ;NAME(7)=W1
 NAME(8)=W2 ;NAME(9)=R1
 NAME(10)=R2 ;NAME(14)=H1
 NAME(15)=H2
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(V2,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(W2,Y,Y,N,N,N,Y)
 SOLUTN(R1,Y,Y,N,N,N,Y)
 SOLUTN(R2,Y,Y,N,N,N,Y)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 SOLUTN(H2,Y,Y,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(V2,Y,Y,Y,Y,N,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(W2,Y,Y,Y,Y,N,Y)
 TERMS(R1,Y,Y,Y,Y,Y,Y)
 TERMS(R2,Y,Y,Y,Y,N,Y)
 TERMS(H1,N,Y,Y,Y,Y,Y)
 TERMS(H2,N,Y,Y,Y,N,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 EQDVDP = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 RHO2 =1000. ;TMP2 =0. ;EL2 =0.
 DVO2DT =0. ;DRH2DP =0.
 ENUL =1.0E-05 ;ENUT =0.
 PHINT(V1)=-2.022E+04 ;PHINT(V2)=-2.022E+04
 PHINT(W1)=-2.022E+04 ;PHINT(W2)=-2.022E+04
 PHINT(R1)=-2.022E+04 ;PHINT(R2)=-2.022E+04
 PHINT(H1)=-2.022E+04 ;PHINT(H2)=-2.022E+04
 PRNDTL(V1)=1. ;PRNDTL(V2)=1.
 PRNDTL(W1)=1. ;PRNDTL(W2)=1.
 PRNDTL(R1)=1. ;PRNDTL(R2)=1.
 PRNDTL(H1)=0.7 ;PRNDTL(H2)=1.
 PRT(V1)=1. ;PRT(V2)=1.
 PRT(W1)=1. ;PRT(W2)=1.
 PRT(R1)=1. ;PRT(R2)=1.
 PRT(H1)=1. ;PRT(H2)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 CFIPS =100.
 RLOLIM =0. ;CMDOT =0.
 CINT(P1)=1. ;CINT(V1)=1.
 CINT(V2)=1. ;CINT(W1)=1.
 CINT(W2)=1. ;CINT(R1)=1.
 CINT(R2)=1. ;CINT(H1)=1.
 CINT(H2)=1.
 PHINT(P1)=-2.022E+04 ;PHINT(V1)=-2.022E+04
 PHINT(V2)=-2.022E+04 ;PHINT(W1)=-2.022E+04
 PHINT(W2)=-2.022E+04 ;PHINT(R1)=-2.022E+04
 PHINT(R2)=-2.022E+04 ;PHINT(H1)=-2.022E+04
 PHINT(H2)=-2.022E+04
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(V2)=1.0E-10 ;FIINIT(W1)=0.1
 FIINIT(W2)=0.1 ;FIINIT(R1)=0.999
 FIINIT(R2)=1.0E-03 ;FIINIT(H1)=1.0E-10
 FIINIT(H2)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(WALL ,NWALL , 1, 1, 20, 20, 1, 20, 1, 1)
 COVAL(WALL ,W1 ,1. ,0. )
 COVAL(WALL ,H1 ,1.428571 ,1. )
 
 PATCH(INLET ,LOW , 1, 1, 1, 20, 1, 1, 1, 1)
 COVAL(INLET ,V1 ,0. ,0. )
 COVAL(INLET ,V2 ,0. ,0. )
 COVAL(INLET ,W1 ,0. ,0.1 )
 COVAL(INLET ,W2 ,0. ,0.1 )
 COVAL(INLET ,R1 , FIXFLU ,0.1 )
 COVAL(INLET ,R2 , FIXFLU ,0.1 )
 COVAL(INLET ,H1 ,0. ,0. )
 COVAL(INLET ,H2 ,0. ,0. )
 
 PATCH(OUTLET ,HIGH , 1, 1, 1, 20, 20, 20, 1, 1)
 COVAL(OUTLET ,W1 ,0. ,0. )
 COVAL(OUTLET ,W2 ,0. ,0. )
 COVAL(OUTLET ,R1 ,1. ,0. )
 COVAL(OUTLET ,R2 ,1000. ,0. )
 
 PATCH(ORIFICE ,HIGH , 1, 1, 11, 20, 5, 5, 1, 1)
 COVAL(ORIFICE ,W1 , FIXVAL ,0. )
 COVAL(ORIFICE ,W2 , FIXVAL ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 20 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 ISWR1 = 1 ;ISWR2 = 10000
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(V2)=10 ;LITER(W1)=10
 LITER(W2)=10 ;LITER(R1)=1
 LITER(R2)=1 ;LITER(H1)=20
 LITER(H2)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(V2)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ENDIT(W2)=1.0E-03 ;ENDIT(R1)=1.0E-03
 ENDIT(R2)=1.0E-03 ;ENDIT(H1)=1.0E-03
 ENDIT(H2)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(V2,FALSDT,1.)
 RELAX(W1,FALSDT,1.)
 RELAX(W2,FALSDT,1.)
 RELAX(R1,LINRLX,0.75)
 RELAX(R2,LINRLX,0.75)
 RELAX(H1,FALSDT,1.0E+09)
 RELAX(H2,FALSDT,1.0E+09)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(V2)=1.0E+06 ;VARMIN(V2)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(W2)=1.0E+06 ;VARMIN(W2)=-1.0E+06
 VARMAX(R1)=1. ;VARMIN(R1)=1.0E-06
 VARMAX(R2)=1. ;VARMIN(R2)=1.0E-06
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 VARMAX(H2)=1.0E+10 ;VARMIN(H2)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(V2,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(W2,Y,N,Y,Y,Y,Y)
 OUTPUT(R1,Y,N,Y,Y,Y,Y)
 OUTPUT(R2,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 OUTPUT(H2,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 19 ;IZMON = 10
 NPRMON = 20 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 10 ;NUMCLS = 5
 NYPRIN = -1 ;IYPRF = 9 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 4 ;IZPRL = 8
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = 30 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(IZEQ19 ,PROFIL, 1, 1, 1, 20, 19, 19, 1, 1)
 PLOT(IZEQ19 ,W1 ,0. ,0.4 )
 PLOT(IZEQ19 ,W2 ,0. ,0.4 )
 
 PATCH(CONT ,CONTUR, 1, 1, 1, 20, 1, 20, 1, 1)
 PLOT(CONT ,W1 ,0. ,10. )
 PLOT(CONT ,W2 ,0. ,10. )
 PLOT(CONT ,R2 ,0. ,10. )
 PLOT(CONT ,H1 ,0. ,10. )
 PLOT(CONT ,H2 ,0. ,10. )
 
 PATCH(IZ1TONZ ,PROFIL, 1, 1, 1, 1, 1, 20, 1, 1)
 PLOT(IZ1TONZ ,W1 ,0. ,0. )
 PLOT(IZ1TONZ ,W2 ,0. ,0. )
 PLOT(IZ1TONZ ,R2 ,0. ,0. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP