RSTM_2DY-Z PARABOLIC CHANNEL :T60


TALK=T;RUN(1,1)
  DISPLAY
  The case considered is 2d developing flow and heat transfer
  in plane two-dimensional channel. The Reynolds number is 1.E4
  based on channel height and the laminar Prandtl number is unity.
  The solution domain encompasses both sides of the channel so as
  to provide a test of symmetry. The calculation may be carried
  out with the elliptic or parabolic solution algorithm. The
  results are essentially symmetric about the channel centre line
  though not perfect, and the reasons for the slight asymmetry need
  to be investigated.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(RSTM_2DY-Z PARABOLIC CHANNEL        :T60)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 20
 YVLAST =1.
 YFRAC(1)=0.05 ;YFRAC(2)=0.1
 YFRAC(3)=0.15 ;YFRAC(4)=0.2
 YFRAC(5)=0.25 ;YFRAC(6)=0.3
 YFRAC(7)=0.35 ;YFRAC(8)=0.4
 YFRAC(9)=0.45 ;YFRAC(10)=0.5
 YFRAC(11)=0.55 ;YFRAC(12)=0.6
 YFRAC(13)=0.65 ;YFRAC(14)=0.7
 YFRAC(15)=0.75 ;YFRAC(16)=0.8
 YFRAC(17)=0.85 ;YFRAC(18)=0.9
 YFRAC(19)=0.95 ;YFRAC(20)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = T
 NZ = 100
 ZWLAST =50.
 ZFRAC(1)=1.0E-02 ;ZFRAC(2)=0.02
 ZFRAC(3)=0.03 ;ZFRAC(4)=0.04
 ZFRAC(5)=0.05 ;ZFRAC(6)=0.06
 ZFRAC(7)=0.07 ;ZFRAC(8)=0.08
 ZFRAC(9)=0.09 ;ZFRAC(10)=0.1
 ZFRAC(11)=0.11 ;ZFRAC(12)=0.12
 ZFRAC(13)=0.13 ;ZFRAC(14)=0.14
 ZFRAC(15)=0.15 ;ZFRAC(16)=0.16
 ZFRAC(17)=0.17 ;ZFRAC(18)=0.18
 ZFRAC(19)=0.19 ;ZFRAC(20)=0.2
 ZFRAC(21)=0.21 ;ZFRAC(22)=0.22
 ZFRAC(23)=0.23 ;ZFRAC(24)=0.24
 ZFRAC(25)=0.25 ;ZFRAC(26)=0.26
 ZFRAC(27)=0.27 ;ZFRAC(28)=0.28
 ZFRAC(29)=0.29 ;ZFRAC(30)=0.3
 ZFRAC(31)=0.31 ;ZFRAC(32)=0.32
 ZFRAC(33)=0.33 ;ZFRAC(34)=0.34
 ZFRAC(35)=0.35 ;ZFRAC(36)=0.36
 ZFRAC(37)=0.37 ;ZFRAC(38)=0.38
 ZFRAC(39)=0.39 ;ZFRAC(40)=0.4
 ZFRAC(41)=0.41 ;ZFRAC(42)=0.42
 ZFRAC(43)=0.43 ;ZFRAC(44)=0.44
 ZFRAC(45)=0.45 ;ZFRAC(46)=0.46
 ZFRAC(47)=0.47 ;ZFRAC(48)=0.48
 ZFRAC(49)=0.49 ;ZFRAC(50)=0.5
 ZFRAC(51)=0.51 ;ZFRAC(52)=0.52
 ZFRAC(53)=0.53 ;ZFRAC(54)=0.54
 ZFRAC(55)=0.55 ;ZFRAC(56)=0.56
 ZFRAC(57)=0.57 ;ZFRAC(58)=0.58
 ZFRAC(59)=0.59 ;ZFRAC(60)=0.6
 ZFRAC(61)=0.61 ;ZFRAC(62)=0.62
 ZFRAC(63)=0.63 ;ZFRAC(64)=0.64
 ZFRAC(65)=0.65 ;ZFRAC(66)=0.66
 ZFRAC(67)=0.67 ;ZFRAC(68)=0.68
 ZFRAC(69)=0.69 ;ZFRAC(70)=0.7
 ZFRAC(71)=0.71 ;ZFRAC(72)=0.72
 ZFRAC(73)=0.73 ;ZFRAC(74)=0.74
 ZFRAC(75)=0.75 ;ZFRAC(76)=0.76
 ZFRAC(77)=0.77 ;ZFRAC(78)=0.78
 ZFRAC(79)=0.79 ;ZFRAC(80)=0.8
 ZFRAC(81)=0.81 ;ZFRAC(82)=0.82
 ZFRAC(83)=0.83 ;ZFRAC(84)=0.84
 ZFRAC(85)=0.85 ;ZFRAC(86)=0.86
 ZFRAC(87)=0.87 ;ZFRAC(88)=0.88
 ZFRAC(89)=0.89 ;ZFRAC(90)=0.9
 ZFRAC(91)=0.91 ;ZFRAC(92)=0.92
 ZFRAC(93)=0.93 ;ZFRAC(94)=0.94
 ZFRAC(95)=0.95 ;ZFRAC(96)=0.96
 ZFRAC(97)=0.97 ;ZFRAC(98)=0.98
 ZFRAC(99)=0.99 ;ZFRAC(100)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(5)=V1
 NAME(7)=W1 ;NAME(12)=KE
 NAME(13)=EP ;NAME(14)=H1
 NAME(143)=FWAL ;NAME(144)=VTRS
 NAME(145)=U2RS ;NAME(146)=V2RS
 NAME(147)=W2RS ;NAME(148)=VWRS
 NAME(149)=LEN1 ;NAME(150)=ENUT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(KE,Y,N,N,N,N,N)
 SOLUTN(EP,Y,Y,N,N,N,N)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 SOLUTN(FWAL,Y,N,N,N,N,Y)
 SOLUTN(VTRS,Y,Y,N,N,N,N)
 SOLUTN(U2RS,Y,Y,N,N,N,N)
 SOLUTN(V2RS,Y,Y,N,N,N,N)
 SOLUTN(W2RS,Y,Y,N,N,N,N)
 SOLUTN(VWRS,Y,Y,N,N,N,N)
 SOLUTN(LEN1,Y,N,N,N,N,N)
 SOLUTN(ENUT,Y,N,N,N,N,N)
 VIST = 150
 LEN1 = 149
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(EP,Y,Y,Y,Y,N,Y)
 TERMS(H1,N,Y,Y,Y,Y,Y)
 TERMS(VTRS,N,Y,Y,Y,Y,Y)
 TERMS(U2RS,N,Y,Y,Y,N,Y)
 TERMS(V2RS,N,Y,Y,Y,Y,Y)
 TERMS(W2RS,N,Y,Y,Y,N,Y)
 TERMS(VWRS,N,Y,Y,Y,Y,Y)
 DIFCUT =0. ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWRH1 = T
 NEWENT = F
 UDIFF = T
 UCONNE = T
 USOURC = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 = GRND2 ;TMP1 =0. ;EL1 = GRND
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 RHO1A =0. ;RHO1B =3.095975E-06 ;RHO1C =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 EL1A =0. ;EL1B =0. ;EL1C =0.
 ENUL =1.0E-04 ;ENUT = GRND
 ENUTA =0. ;ENUTB =0. ;ENUTC =0.
 IENUTA = 0
 PRNDTL(V1)=1. ;PRNDTL(W1)=1.
 PRNDTL(EP)=1. ;PRNDTL(H1)=1.
 PRNDTL(VTRS)=1. ;PRNDTL(U2RS)=1.
 PRNDTL(V2RS)=1. ;PRNDTL(W2RS)=1.
 PRNDTL(VWRS)=1.
 PRT(V1)=1. ;PRT(W1)=1.
 PRT(EP)=1.314 ;PRT(H1)=1.
 PRT(VTRS)=1. ;PRT(U2RS)=1.
 PRT(V2RS)=1. ;PRT(W2RS)=1.
 PRT(VWRS)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(W1)=1. ;FIINIT(KE)=5.0E-03
 FIINIT(EP)=1.659681E-03 ;FIINIT(H1)=3.23E+05
 FIINIT(FWAL)=1.0E-10 ;FIINIT(VTRS)=1.0E-10
 FIINIT(U2RS)=3.333334E-03 ;FIINIT(V2RS)=3.333334E-03
 FIINIT(W2RS)=3.333334E-03 ;FIINIT(VWRS)=1.5E-03
 FIINIT(LEN1)=1.0E-10 ;FIINIT(ENUT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(INL ,LOW , 1, 1, 1, 20, 1, 1, 1, 1)
 COVAL(INL ,P1 , FIXFLU ,1. )
 COVAL(INL ,V1 ,0. ,0. )
 COVAL(INL ,W1 ,0. ,1. )
 COVAL(INL ,KE ,0. ,5.0E-03 )
 COVAL(INL ,EP ,0. ,1.659681E-03 )
 COVAL(INL ,H1 ,0. ,3.23E+05 )
 COVAL(INL ,U2RS,0. ,3.333334E-03 )
 COVAL(INL ,V2RS,0. ,3.333334E-03 )
 COVAL(INL ,W2RS,0. ,3.333334E-03 )
 
 PATCH(WAL ,NWALL , 1, 1, 20, 20, 1, 100, 1, 1)
 COVAL(WAL ,W1 , GRND2 ,0. )
 COVAL(WAL ,EP , GRND2 , GRND2 )
 COVAL(WAL ,H1 , GRND2 ,2.93E+05 )
 
 PATCH(WL2 ,SWALL , 1, 1, 1, 1, 1, 100, 1, 1)
 COVAL(WL2 ,W1 , GRND2 ,0. )
 COVAL(WL2 ,EP , GRND2 , GRND2 )
 COVAL(WL2 ,H1 , GRND2 ,2.93E+05 )
 
 PATCH(WDMPN03 ,PHASEM, 1, 1, 1, 20, 1, 100, 1, 1)
 COVAL(WDMPN03 ,VTRS, FIXFLU , GRND1 )
 COVAL(WDMPN03 ,U2RS, FIXFLU , GRND1 )
 COVAL(WDMPN03 ,V2RS, FIXFLU , GRND1 )
 COVAL(WDMPN03 ,W2RS, FIXFLU , GRND1 )
 COVAL(WDMPN03 ,VWRS, FIXFLU , GRND1 )
 
 PATCH(WDMPS04 ,PHASEM, 1, 1, 1, 20, 1, 100, 1, 1)
 COVAL(WDMPS04 ,VTRS, FIXFLU , GRND1 )
 COVAL(WDMPS04 ,U2RS, FIXFLU , GRND1 )
 COVAL(WDMPS04 ,V2RS, FIXFLU , GRND1 )
 COVAL(WDMPS04 ,W2RS, FIXFLU , GRND1 )
 COVAL(WDMPS04 ,VWRS, FIXFLU , GRND1 )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 IPARAB = 0
 AZPH =0. ;PBAR =0.
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 1 ;ISWC1 = 1
 LITHYD = 10 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(W1)=10 ;LITER(EP)=20
 LITER(H1)=20 ;LITER(VTRS)=20
 LITER(U2RS)=20 ;LITER(V2RS)=20
 LITER(W2RS)=20 ;LITER(VWRS)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(W1)=1.0E-03 ;ENDIT(EP)=1.0E-03
 ENDIT(H1)=1.0E-03 ;ENDIT(VTRS)=1.0E-03
 ENDIT(U2RS)=1.0E-03 ;ENDIT(V2RS)=1.0E-03
 ENDIT(W2RS)=1.0E-03 ;ENDIT(VWRS)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(V1,FALSDT,0.5)
 RELAX(W1,FALSDT,0.5)
 RELAX(KE,LINRLX,1.)
 RELAX(EP,FALSDT,0.1)
 RELAX(H1,FALSDT,0.5)
 RELAX(FWAL,LINRLX,1.)
 RELAX(VTRS,FALSDT,0.5)
 RELAX(U2RS,FALSDT,0.1)
 RELAX(V2RS,FALSDT,0.1)
 RELAX(W2RS,FALSDT,0.1)
 RELAX(VWRS,FALSDT,0.1)
 RELAX(LEN1,LINRLX,1.)
 RELAX(ENUT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
 VARMAX(EP)=1.0E+10 ;VARMIN(EP)=1.0E-10
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 VARMAX(FWAL)=1.0E+10 ;VARMIN(FWAL)=-1.0E+10
 VARMAX(VTRS)=1.0E+10 ;VARMIN(VTRS)=-1.0E+10
 VARMAX(U2RS)=1.0E+10 ;VARMIN(U2RS)=-1.0E+10
 VARMAX(V2RS)=1.0E+10 ;VARMIN(V2RS)=-1.0E+10
 VARMAX(W2RS)=1.0E+10 ;VARMIN(W2RS)=-1.0E+10
 VARMAX(VWRS)=1.0E+10 ;VARMIN(VWRS)=-1.0E+10
 VARMAX(LEN1)=1.0E+10 ;VARMIN(LEN1)=-1.0E+10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 GENK = T
 RSTM = T
 PARSOL = F
 IRSMSM = 2
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(KE,Y,N,Y,N,N,N)
 OUTPUT(EP,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 OUTPUT(FWAL,Y,N,Y,N,N,N)
 OUTPUT(VTRS,Y,N,Y,Y,Y,Y)
 OUTPUT(U2RS,Y,N,Y,Y,Y,Y)
 OUTPUT(V2RS,Y,N,Y,Y,Y,Y)
 OUTPUT(W2RS,Y,N,Y,Y,Y,Y)
 OUTPUT(VWRS,Y,N,Y,Y,Y,Y)
 OUTPUT(LEN1,Y,N,Y,N,N,N)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 WALPRN = T
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 18 ;IZMON = 50
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP