TALK=T;RUN(1,1)
DISPLAY
The problem considered is 1dy fully-developed turbulent
flow in a channel at a Reynolds number of 5.E4 with heat
and mass transfer. The turbulence is simulated by use of
the Reynolds stress transport model (RSTM), and optionally
by use of the k-e model. For heat and scalar transport with
the RSTM, one of the following models may be employed: a
simple gradient-diffusion model (IRSMSM=0); a generalised
gradient-diffusion model (IRSMSM=1); or a full transport
model (IRSMSM=2). The laminar Prandtl number is 3.0, and the
energy equation may be solved via H1 or TEM1.
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(RSTM_1DY DEVELOPED CHANNEL FLOW :T600)
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 14
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 1
XULAST =1.
XFRAC(1)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 30
YVLAST =0.5
YFRAC(1)=0.063055 ;YFRAC(2)=0.109786
YFRAC(3)=0.151851 ;YFRAC(4)=0.191148
YFRAC(5)=0.228506 ;YFRAC(6)=0.264388
YFRAC(7)=0.299088 ;YFRAC(8)=0.332807
YFRAC(9)=0.365692 ;YFRAC(10)=0.397852
YFRAC(11)=0.429373 ;YFRAC(12)=0.460327
YFRAC(13)=0.490767 ;YFRAC(14)=0.520743
YFRAC(15)=0.550293 ;YFRAC(16)=0.579451
YFRAC(17)=0.608247 ;YFRAC(18)=0.636706
YFRAC(19)=0.66485 ;YFRAC(20)=0.6927
YFRAC(21)=0.720272 ;YFRAC(22)=0.747583
YFRAC(23)=0.774646 ;YFRAC(24)=0.801475
YFRAC(25)=0.828081 ;YFRAC(26)=0.854476
YFRAC(27)=0.880668 ;YFRAC(28)=0.906666
YFRAC(29)=0.93248 ;YFRAC(30)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 1
ZWLAST =1.
ZFRAC(1)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(5)=V1 ;NAME(7)=W1
NAME(12)=KE ;NAME(13)=EP
NAME(124)=PRPS ;NAME(125)=DSDY
NAME(126)=VTRS ;NAME(127)=VSC1
NAME(128)=VSC2 ;NAME(129)=U2RS
NAME(130)=V2RS ;NAME(131)=W2RS
NAME(132)=VWRS ;NAME(133)=LEN1
NAME(134)=ENUT ;NAME(135)=W2DK
NAME(136)=V2DK ;NAME(137)=U2DK
NAME(138)=VWDK ;NAME(139)=FWAL
NAME(140)=EPDK ;NAME(141)=PK
NAME(142)=DVW ;NAME(143)=PU2
NAME(144)=PV2 ;NAME(145)=PW2
NAME(146)=PVW ;NAME(147)=DWDY
NAME(148)=SC2 ;NAME(149)=SC1
NAME(150)=TEM1
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(V1,Y,N,N,N,N,Y)
SOLUTN(W1,Y,Y,N,N,N,Y)
SOLUTN(KE,Y,N,N,N,N,N)
SOLUTN(EP,Y,Y,N,N,N,N)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(DSDY,Y,N,N,N,N,Y)
SOLUTN(VTRS,Y,Y,N,N,N,N)
SOLUTN(VSC1,Y,Y,N,N,N,N)
SOLUTN(VSC2,Y,Y,N,N,N,N)
SOLUTN(U2RS,Y,Y,N,N,N,N)
SOLUTN(V2RS,Y,Y,N,N,N,N)
SOLUTN(W2RS,Y,Y,N,N,N,N)
SOLUTN(VWRS,Y,Y,N,N,N,N)
SOLUTN(LEN1,Y,N,N,N,N,N)
SOLUTN(ENUT,Y,N,N,N,N,N)
SOLUTN(W2DK,Y,N,N,N,N,Y)
SOLUTN(V2DK,Y,N,N,N,N,Y)
SOLUTN(U2DK,Y,N,N,N,N,Y)
SOLUTN(VWDK,Y,N,N,N,N,Y)
SOLUTN(FWAL,Y,N,N,N,N,Y)
SOLUTN(EPDK,Y,N,N,N,N,Y)
SOLUTN(PK,Y,N,N,N,N,Y)
SOLUTN(DVW,Y,N,N,N,N,Y)
SOLUTN(PU2,Y,N,N,N,N,Y)
SOLUTN(PV2,Y,N,N,N,N,Y)
SOLUTN(PW2,Y,N,N,N,N,Y)
SOLUTN(PVW,Y,N,N,N,N,Y)
SOLUTN(DWDY,Y,N,N,N,N,Y)
SOLUTN(SC2,Y,Y,N,N,N,Y)
SOLUTN(SC1,Y,Y,N,N,N,Y)
SOLUTN(TEM1,Y,Y,N,N,N,Y)
VIST = 134
LEN1 = 133
PRPS = 124
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(W1,Y,N,Y,Y,Y,Y)
TERMS(EP,Y,N,Y,Y,N,Y)
TERMS(VTRS,N,N,Y,Y,Y,Y)
TERMS(VSC1,N,N,Y,Y,N,Y)
TERMS(VSC2,N,N,Y,Y,Y,Y)
TERMS(U2RS,N,N,Y,Y,N,Y)
TERMS(V2RS,N,N,Y,Y,Y,Y)
TERMS(W2RS,N,N,Y,Y,N,Y)
TERMS(VWRS,N,N,Y,Y,Y,Y)
TERMS(SC2,N,N,Y,Y,Y,Y)
TERMS(SC1,N,N,Y,Y,N,Y)
TERMS(TEM1,N,N,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
NEWENT = F
UDIFF = T
UCONNE = T
USOURC = T
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 = GRND
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
EL1A =0. ;EL1B =0. ;EL1C =0.
ENUL =2.0E-05 ;ENUT = GRND
ENUTA =0. ;ENUTB =0. ;ENUTC =0.
IENUTA = 0
PRNDTL(W1)=1. ;PRNDTL(EP)=1.
PRNDTL(VTRS)=1. ;PRNDTL(VSC1)=1.
PRNDTL(VSC2)=1. ;PRNDTL(U2RS)=1.
PRNDTL(V2RS)=1. ;PRNDTL(W2RS)=1.
PRNDTL(VWRS)=1. ;PRNDTL(SC2)=3.
PRNDTL(SC1)=3. ;PRNDTL(TEM1)=CONDFILE
PRT(W1)=1. ;PRT(EP)=1.314
PRT(VTRS)=1. ;PRT(VSC1)=1.
PRT(VSC2)=1. ;PRT(U2RS)=1.
PRT(V2RS)=1. ;PRT(W2RS)=1.
PRT(VWRS)=1. ;PRT(SC2)=1.
PRT(SC1)=1. ;PRT(TEM1)=1.
CP1 =3. ;CP2 =1.
* List of user-defined materials to be read by EARTH
MATFLG=T;IMAT=1
* Name
*Ind. Dens. Viscos. Spec.heat Conduct. Expans. Compr.
*
35 1. 2.E-5 3.0 2.E-5 0
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(V1)=0. ;FIINIT(W1)=1.
FIINIT(KE)=4.492233E-03 ;FIINIT(EP)=1.099306E-03
FIINIT(PRPS)=35. ;FIINIT(DSDY)=1.0E-10
FIINIT(VTRS)=1.0E-10 ;FIINIT(VSC1)=1.0E-10
FIINIT(VSC2)=1.0E-10 ;FIINIT(U2RS)=2.994822E-03
FIINIT(V2RS)=2.994822E-03 ;FIINIT(W2RS)=2.994822E-03
FIINIT(VWRS)=1.34767E-03 ;FIINIT(LEN1)=1.0E-10
FIINIT(ENUT)=1.0E-10 ;FIINIT(W2DK)=1.0E-10
FIINIT(V2DK)=1.0E-10 ;FIINIT(U2DK)=1.0E-10
FIINIT(VWDK)=1.0E-10 ;FIINIT(FWAL)=1.0E-10
FIINIT(EPDK)=1.0E-10 ;FIINIT(PK)=1.0E-10
FIINIT(DVW)=1.0E-10 ;FIINIT(PU2)=1.0E-10
FIINIT(PV2)=1.0E-10 ;FIINIT(PW2)=1.0E-10
FIINIT(PVW)=1.0E-10 ;FIINIT(DWDY)=1.0E-10
FIINIT(SC2)=5. ;FIINIT(SC1)=5.
FIINIT(TEM1)=5.
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(PFOR ,VOLUME, 1, 1, 1, 30, 1, 1, 1, 1)
COVAL(PFOR ,W1 , FIXFLU ,4.492233E-03 )
PATCH(WAL1 ,NWALL , 1, 1, 30, 30, 1, 1, 1, 1)
COVAL(WAL1 ,W1 , GRND2 ,0. )
COVAL(WAL1 ,EP , GRND2 , GRND2 )
COVAL(WAL1 ,SC2 , GRND2 ,10. )
COVAL(WAL1 ,SC1 , GRND2 ,10. )
COVAL(WAL1 ,TEM1, GRND2 ,10. )
PATCH(WDMPN03 ,PHASEM, 1, 1, 1, 30, 1, 1, 1, 1)
COVAL(WDMPN03 ,VTRS, FIXFLU , GRND1 )
COVAL(WDMPN03 ,VSC1, FIXFLU , GRND1 )
COVAL(WDMPN03 ,VSC2, FIXFLU , GRND1 )
COVAL(WDMPN03 ,U2RS, FIXFLU , GRND1 )
COVAL(WDMPN03 ,V2RS, FIXFLU , GRND1 )
COVAL(WDMPN03 ,W2RS, FIXFLU , GRND1 )
COVAL(WDMPN03 ,VWRS, FIXFLU , GRND1 )
PATCH(SMPLS ,SOUTH , 1, 1, 1, 1, 1, 1, 1, 1)
COVAL(SMPLS ,VTRS, GRND1 ,0. )
COVAL(SMPLS ,VSC1, GRND1 ,0. )
COVAL(SMPLS ,VSC2, GRND1 ,0. )
COVAL(SMPLS ,VWRS, GRND1 ,0. )
PATCH(FDFCWT ,PHASEM, 1, 1, 1, 30, 1, 1, 1, 1)
COVAL(FDFCWT ,SC2 ,2.974371E-03 ,10. )
COVAL(FDFCWT ,SC1 ,2.974371E-03 ,10. )
COVAL(FDFCWT ,TEM1,8.923113E-03 ,10. )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 160 ;ISWC1 = 1
LITHYD = 8 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
LITER(W1)=10 ;LITER(EP)=20
LITER(VTRS)=20 ;LITER(VSC1)=20
LITER(VSC2)=20 ;LITER(U2RS)=20
LITER(V2RS)=20 ;LITER(W2RS)=20
LITER(VWRS)=20 ;LITER(SC2)=20
LITER(SC1)=20 ;LITER(TEM1)=20
ENDIT(W1)=1.0E-03 ;ENDIT(EP)=1.0E-03
ENDIT(VTRS)=1.0E-03 ;ENDIT(VSC1)=1.0E-03
ENDIT(VSC2)=1.0E-03 ;ENDIT(U2RS)=1.0E-03
ENDIT(V2RS)=1.0E-03 ;ENDIT(W2RS)=1.0E-03
ENDIT(VWRS)=1.0E-03 ;ENDIT(SC2)=1.0E-03
ENDIT(SC1)=1.0E-03 ;ENDIT(TEM1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(V1,LINRLX,1.)
RELAX(W1,FALSDT,0.3)
RELAX(KE,LINRLX,1.)
RELAX(EP,FALSDT,0.02)
RELAX(PRPS,LINRLX,1.)
RELAX(DSDY,LINRLX,1.)
RELAX(VTRS,FALSDT,0.02)
RELAX(VSC1,FALSDT,0.02)
RELAX(VSC2,FALSDT,0.02)
RELAX(U2RS,FALSDT,0.02)
RELAX(V2RS,FALSDT,0.02)
RELAX(W2RS,FALSDT,0.02)
RELAX(VWRS,FALSDT,0.02)
RELAX(LEN1,LINRLX,1.)
RELAX(ENUT,LINRLX,1.)
RELAX(W2DK,LINRLX,1.)
RELAX(V2DK,LINRLX,1.)
RELAX(U2DK,LINRLX,1.)
RELAX(VWDK,LINRLX,1.)
RELAX(FWAL,LINRLX,1.)
RELAX(EPDK,LINRLX,1.)
RELAX(PK,LINRLX,1.)
RELAX(DVW,LINRLX,1.)
RELAX(PU2,LINRLX,1.)
RELAX(PV2,LINRLX,1.)
RELAX(PW2,LINRLX,1.)
RELAX(PVW,LINRLX,1.)
RELAX(DWDY,LINRLX,1.)
RELAX(SC2,FALSDT,10.)
RELAX(SC1,FALSDT,10.)
RELAX(TEM1,FALSDT,10.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
VARMAX(EP)=1.0E+10 ;VARMIN(EP)=1.0E-10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(DSDY)=1.0E+10 ;VARMIN(DSDY)=-1.0E+10
VARMAX(VTRS)=1.0E+10 ;VARMIN(VTRS)=-1.0E+10
VARMAX(VSC1)=1.0E+10 ;VARMIN(VSC1)=-1.0E+10
VARMAX(VSC2)=1.0E+10 ;VARMIN(VSC2)=-1.0E+10
VARMAX(U2RS)=1.0E+10 ;VARMIN(U2RS)=-1.0E+10
VARMAX(V2RS)=1.0E+10 ;VARMIN(V2RS)=-1.0E+10
VARMAX(W2RS)=1.0E+10 ;VARMIN(W2RS)=-1.0E+10
VARMAX(VWRS)=1.0E+10 ;VARMIN(VWRS)=-1.0E+10
VARMAX(LEN1)=1.0E+10 ;VARMIN(LEN1)=-1.0E+10
VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
VARMAX(W2DK)=1.0E+10 ;VARMIN(W2DK)=-1.0E+10
VARMAX(V2DK)=1.0E+10 ;VARMIN(V2DK)=-1.0E+10
VARMAX(U2DK)=1.0E+10 ;VARMIN(U2DK)=-1.0E+10
VARMAX(VWDK)=1.0E+10 ;VARMIN(VWDK)=-1.0E+10
VARMAX(FWAL)=1.0E+10 ;VARMIN(FWAL)=-1.0E+10
VARMAX(EPDK)=1.0E+10 ;VARMIN(EPDK)=-1.0E+10
VARMAX(PK)=1.0E+10 ;VARMIN(PK)=-1.0E+10
VARMAX(DVW)=1.0E+10 ;VARMIN(DVW)=-1.0E+10
VARMAX(PU2)=1.0E+10 ;VARMIN(PU2)=-1.0E+10
VARMAX(PV2)=1.0E+10 ;VARMIN(PV2)=-1.0E+10
VARMAX(PW2)=1.0E+10 ;VARMIN(PW2)=-1.0E+10
VARMAX(PVW)=1.0E+10 ;VARMIN(PVW)=-1.0E+10
VARMAX(DWDY)=1.0E+10 ;VARMIN(DWDY)=-1.0E+10
VARMAX(SC2)=1.0E+10 ;VARMIN(SC2)=-1.0E+10
VARMAX(SC1)=1.0E+10 ;VARMIN(SC1)=-1.0E+10
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
GENK = T
RSTM = T
YPLS = T
FDFSOL = T
PARSOL = F
IRSMSM = 2
ISG62 = 1
CSG10 ='q1'
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,MATERIAL,35,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(V1,N,N,N,N,N,N)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(KE,Y,N,Y,N,N,N)
OUTPUT(EP,Y,N,Y,Y,Y,Y)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(DSDY,Y,N,Y,N,N,N)
OUTPUT(VTRS,Y,N,Y,Y,Y,Y)
OUTPUT(VSC1,Y,N,Y,Y,Y,Y)
OUTPUT(VSC2,Y,N,Y,Y,Y,Y)
OUTPUT(U2RS,Y,N,Y,Y,Y,Y)
OUTPUT(V2RS,Y,N,Y,Y,Y,Y)
OUTPUT(W2RS,Y,N,Y,Y,Y,Y)
OUTPUT(VWRS,Y,N,Y,Y,Y,Y)
OUTPUT(LEN1,Y,N,Y,N,N,N)
OUTPUT(ENUT,Y,N,Y,N,N,N)
OUTPUT(W2DK,Y,N,Y,N,N,N)
OUTPUT(V2DK,Y,N,Y,N,N,N)
OUTPUT(U2DK,Y,N,Y,N,N,N)
OUTPUT(VWDK,Y,N,Y,N,N,N)
OUTPUT(FWAL,Y,N,Y,N,N,N)
OUTPUT(EPDK,Y,N,Y,N,N,N)
OUTPUT(PK,Y,N,Y,N,N,N)
OUTPUT(DVW,Y,N,Y,N,N,N)
OUTPUT(PU2,N,N,N,N,N,N)
OUTPUT(PV2,N,N,N,N,N,N)
OUTPUT(PW2,Y,N,Y,N,N,N)
OUTPUT(PVW,Y,N,Y,N,N,N)
OUTPUT(DWDY,Y,N,Y,N,N,N)
OUTPUT(SC2,Y,N,Y,Y,Y,Y)
OUTPUT(SC1,Y,N,Y,Y,Y,Y)
OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
WALPRN = T
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 29 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
IPLTF = 1 ;IPLTL = -1 ;NPLT = 20
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP