TALK=T;RUN(1,1)
  DISPLAY
  The problem considered is steady, incompressible, turbulent plane
  flow along a smooth flat plate with zero pressure gradient. The
  plate is maintained at a constant temperature above that of the
  free stream. The calculations are started 0.487 metres downstream
  of the leading edge, corresponding to a length Reynolds number
  REx of 1.E6. The initial mean- velocity profile is taken from
  published experimental data, and the initial turbulence-energy
  profile is estimated from the local friction velocity by assuming
  a distribution compatible with that measured in the fully-
  developed boundary layer.
  ENDDIS
  AUTOPLOT USE
  file
  phi 5

  clear
  da 1 w1;col3;plot 1
  @
   0.10254E+03 0.26250E+04 CR
  W1(m/s)@
  @
   0.18969E+04 0.16284E+03 CR
  Distance across the Boundary Layer(m)@
  msg Press e to END
  ENDUSE
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(VAN DRIEST_2D PARAB BOUNDARY LAYER :T202)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 100
 YVLAST =0.0115
 AZYV =0.85 ;AZRI =0. ;AZAL =0.
 YFRAC(1)=9.999999E-04 ;YFRAC(2)=2.828427E-03
 YFRAC(3)=5.196152E-03 ;YFRAC(4)=7.999999E-03
 YFRAC(5)=0.01118 ;YFRAC(6)=0.014697
 YFRAC(7)=0.01852 ;YFRAC(8)=0.022627
 YFRAC(9)=0.027 ;YFRAC(10)=0.031623
 YFRAC(11)=0.036483 ;YFRAC(12)=0.041569
 YFRAC(13)=0.046872 ;YFRAC(14)=0.052383
 YFRAC(15)=0.058095 ;YFRAC(16)=0.064
 YFRAC(17)=0.070093 ;YFRAC(18)=0.076368
 YFRAC(19)=0.082819 ;YFRAC(20)=0.089443
 YFRAC(21)=0.096234 ;YFRAC(22)=0.103189
 YFRAC(23)=0.110304 ;YFRAC(24)=0.117576
 YFRAC(25)=0.125 ;YFRAC(26)=0.132574
 YFRAC(27)=0.140296 ;YFRAC(28)=0.148162
 YFRAC(29)=0.15617 ;YFRAC(30)=0.164317
 YFRAC(31)=0.172601 ;YFRAC(32)=0.181019
 YFRAC(33)=0.189571 ;YFRAC(34)=0.198252
 YFRAC(35)=0.207063 ;YFRAC(36)=0.216
 YFRAC(37)=0.225062 ;YFRAC(38)=0.234248
 YFRAC(39)=0.243555 ;YFRAC(40)=0.252982
 YFRAC(41)=0.262528 ;YFRAC(42)=0.272191
 YFRAC(43)=0.28197 ;YFRAC(44)=0.291863
 YFRAC(45)=0.301869 ;YFRAC(46)=0.311987
 YFRAC(47)=0.322216 ;YFRAC(48)=0.332554
 YFRAC(49)=0.343 ;YFRAC(50)=0.353553
 YFRAC(51)=0.364213 ;YFRAC(52)=0.374977
 YFRAC(53)=0.385846 ;YFRAC(54)=0.396817
 YFRAC(55)=0.407891 ;YFRAC(56)=0.419066
 YFRAC(57)=0.430341 ;YFRAC(58)=0.441715
 YFRAC(59)=0.453188 ;YFRAC(60)=0.464758
 YFRAC(61)=0.476425 ;YFRAC(62)=0.488189
 YFRAC(63)=0.500047 ;YFRAC(64)=0.512
 YFRAC(65)=0.524047 ;YFRAC(66)=0.536187
 YFRAC(67)=0.548419 ;YFRAC(68)=0.560742
 YFRAC(69)=0.573157 ;YFRAC(70)=0.585662
 YFRAC(71)=0.598257 ;YFRAC(72)=0.61094
 YFRAC(73)=0.623712 ;YFRAC(74)=0.636572
 YFRAC(75)=0.649519 ;YFRAC(76)=0.662553
 YFRAC(77)=0.675672 ;YFRAC(78)=0.688877
 YFRAC(79)=0.702167 ;YFRAC(80)=0.715542
 YFRAC(81)=0.729 ;YFRAC(82)=0.742542
 YFRAC(83)=0.756166 ;YFRAC(84)=0.769873
 YFRAC(85)=0.783661 ;YFRAC(86)=0.797531
 YFRAC(87)=0.811482 ;YFRAC(88)=0.825513
 YFRAC(89)=0.839624 ;YFRAC(90)=0.853815
 YFRAC(91)=0.868085 ;YFRAC(92)=0.882433
 YFRAC(93)=0.896859 ;YFRAC(94)=0.911364
 YFRAC(95)=0.925945 ;YFRAC(96)=0.940604
 YFRAC(97)=0.955339 ;YFRAC(98)=0.970151
 YFRAC(99)=0.985038 ;YFRAC(100)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = T
 NZ = 100
 ZWADD =0.487
 ZWLAST =1.
 AZDZ = GRND2
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(5)=V1
 NAME(7)=W1 ;NAME(14)=TEMP
 NAME(149)=LEN1 ;NAME(150)=ENUT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(TEMP,Y,Y,N,N,N,Y)
 SOLUTN(LEN1,Y,N,N,N,N,Y)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 VIST = 150
 LEN1 = 149
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(TEMP,N,Y,Y,Y,Y,Y)
 DIFCUT =0. ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWENT = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 = GRND7
 TSURR =0. ;TEMP0 =10. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 EL1A =0. ;EL1B =0.41 ;EL1C =5.0E-03
 EL1D =33. ;EL1E =0.
 ENUL =1.5E-05 ;ENUT = GRND2
 ENUTA =0. ;ENUTB =0. ;ENUTC =0.
 IENUTA = 5
 PRNDTL(V1)=1. ;PRNDTL(W1)=1.
 PRNDTL(TEMP)=0.7
 PRT(V1)=1. ;PRT(W1)=1.
 PRT(TEMP)=0.86
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(W1)=33. ;FIINIT(TEMP)=5.
 FIINIT(LEN1)=1.0E-10 ;FIINIT(ENUT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(WFUN ,SWALL , 1, 1, 1, 1, 1, 100, 1, 1)
 COVAL(WFUN ,W1 , GRND2 ,0. )
 COVAL(WFUN ,TEMP, GRND2 ,10. )
 
 PATCH(FREE ,NORTH , 1, 1, 100, 100, 1, 100, 1, 1)
 COVAL(FREE ,P1 ,1.0E+05 ,0. )
 COVAL(FREE ,V1 ,0. ,0. )
 COVAL(FREE ,W1 ,0. ,33. )
 COVAL(FREE ,TEMP,0. ,5. )
 
 PATCH(PROF ,LOW , 1, 1, 1, 100, 1, 1, 1, 1)
 COVAL(PROF ,P1 , FIXFLU , GRND3 )
 COVAL(PROF ,V1 ,0. ,0. )
 COVAL(PROF ,W1 ,0. , GRND3 )
 COVAL(PROF ,TEMP,0. , GRND3 )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 IPARAB = 1
 AZPH =0. ;PBAR =0.
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 1 ;ISWC1 = 1
 LITHYD = 8 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(W1)=10 ;LITER(TEMP)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(W1)=1.0E-03 ;ENDIT(TEMP)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(W1,FALSDT,1.)
 RELAX(TEMP,FALSDT,1.0E+09)
 RELAX(LEN1,LINRLX,1.)
 RELAX(ENUT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(TEMP)=1.0E+10 ;VARMIN(TEMP)=-1.0E+10
 VARMAX(LEN1)=1.0E+10 ;VARMIN(LEN1)=-1.0E+10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 DWDY = T
 PARSOL = F
 DZW1 =0.3
 IENUTA = 5
 ISG62 = 1
 PROFA =3.381E-03 ;PROFB =9.923E-03
 PROFC =0.2345 ;PROFD =33.
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(TEMP,Y,N,Y,Y,Y,Y)
 OUTPUT(LEN1,Y,N,Y,N,N,N)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 3 ;IZMON = 1
 NPRMON = 4 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = 100 ;IZPRF = 1 ;IZPRL = 10000
 IPLTF = 1 ;IPLTL = 8 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(IZEQNZ ,PROFIL, 1, 1, 1, 100, 100, 100, 1, 1)
 PLOT(IZEQNZ ,W1 ,0. ,0. )
 PLOT(IZEQNZ ,TEMP,0. ,0. )
 PLOT(IZEQNZ ,LEN1,0. ,0. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP