TALK=T;RUN(1,1)
DISPLAY
A rectangular block of dimensions LX * LY * LZ is
* held fixed at it north, west and low faces
* subjected to uniform compression at its south face
* allowed to contract freely along its east and high faces
The distributions of displacement in the xy plane are computed,
and also the corresponding stresses and strains in all three
directions.
A uniform cartesian grid is used.
The computed results are compared with the analytically-derived
values.
ENDDIS
photon use
p;;;;
set prop off
con disy x 10 y 1 10 z 1 10 fi;0.001
con disy y 10 x 1 10 z 1 10 fi;0.001
con disy z 10 y 1 10 x 1 10 fi;0.001
pause
con disx x 10 y 1 10 z 1 10 fi;0.001
con disx y 10 x 1 10 z 1 10 fi;0.001
con disx z 10 y 1 10 x 1 10 fi;0.001
enduse
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(3D block in y-direction compression )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 3
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 10
XULAST =0.09
XFRAC(1)=0.1 ;XFRAC(2)=0.2
XFRAC(3)=0.3 ;XFRAC(4)=0.4
XFRAC(5)=0.5 ;XFRAC(6)=0.6
XFRAC(7)=0.7 ;XFRAC(8)=0.8
XFRAC(9)=0.9 ;XFRAC(10)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 10
YVLAST =0.12
YFRAC(1)=0.1 ;YFRAC(2)=0.2
YFRAC(3)=0.3 ;YFRAC(4)=0.4
YFRAC(5)=0.5 ;YFRAC(6)=0.6
YFRAC(7)=0.7 ;YFRAC(8)=0.8
YFRAC(9)=0.9 ;YFRAC(10)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 10
ZWLAST =0.09
ZFRAC(1)=0.1 ;ZFRAC(2)=0.2
ZFRAC(3)=0.3 ;ZFRAC(4)=0.4
ZFRAC(5)=0.5 ;ZFRAC(6)=0.6
ZFRAC(7)=0.7 ;ZFRAC(8)=0.8
ZFRAC(9)=0.9 ;ZFRAC(10)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(130)=W1/T ;NAME(131)=V1/T
NAME(132)=U1/T ;NAME(133)=W1T
NAME(134)=V1T ;NAME(135)=U1T
NAME(136)=EPSZ ;NAME(137)=EPSX
NAME(138)=EPSY ;NAME(139)=STYZ
NAME(140)=STXZ ;NAME(141)=STXY
NAME(142)=STRZ ;NAME(143)=STRY
NAME(144)=STRX ;NAME(145)=VISL
NAME(146)=DRH1 ;NAME(147)=PRPS
NAME(148)=DISZ ;NAME(149)=DISY
NAME(150)=DISX
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(W1/T,Y,N,N,N,N,Y)
SOLUTN(V1/T,Y,N,N,N,N,Y)
SOLUTN(U1/T,Y,N,N,N,N,Y)
SOLUTN(W1T,Y,N,N,N,N,Y)
SOLUTN(V1T,Y,N,N,N,N,Y)
SOLUTN(U1T,Y,N,N,N,N,Y)
SOLUTN(EPSZ,Y,N,N,N,N,Y)
SOLUTN(EPSX,Y,N,N,N,N,Y)
SOLUTN(EPSY,Y,N,N,N,N,Y)
SOLUTN(STYZ,Y,N,N,N,N,Y)
SOLUTN(STXZ,Y,N,N,N,N,Y)
SOLUTN(STXY,Y,N,N,N,N,Y)
SOLUTN(STRZ,Y,N,N,N,N,Y)
SOLUTN(STRY,Y,N,N,N,N,Y)
SOLUTN(STRX,Y,N,N,N,N,Y)
SOLUTN(VISL,Y,N,N,N,N,Y)
SOLUTN(DRH1,Y,N,N,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(DISZ,Y,Y,Y,N,N,Y)
SOLUTN(DISY,Y,Y,Y,N,N,Y)
SOLUTN(DISX,Y,Y,Y,N,N,Y)
VISL = 145
PRPS = 147
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(DISZ,N,Y,Y,Y,Y,Y)
TERMS(DISY,N,Y,Y,Y,N,Y)
TERMS(DISX,N,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1.0E-05 ;ENUT =0.
PRNDTL(DISZ)=1. ;PRNDTL(DISY)=1.
PRNDTL(DISX)=1.
PRT(DISZ)=1. ;PRT(DISY)=1.
PRT(DISX)=1.
CP1 =1. ;CP2 =1.
* List of user-defined materials to be read by EARTH
MATFLG=T;IMAT=1
* Name
*Ind. Dens. Viscos. Spec.heat Conduct. Expans. Compr.
*
160 7800.0 0.3 473.0 43.0 1.0E-5 0.5E-11
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(W1/T)=1.0E-10 ;FIINIT(V1/T)=1.0E-10
FIINIT(U1/T)=1.0E-10 ;FIINIT(W1T)=1.0E-10
FIINIT(V1T)=1.0E-10 ;FIINIT(U1T)=1.0E-10
FIINIT(EPSZ)=1.0E-10 ;FIINIT(EPSX)=1.0E-10
FIINIT(EPSY)=1.0E-10 ;FIINIT(STYZ)=1.0E-10
FIINIT(STXZ)=1.0E-10 ;FIINIT(STXY)=1.0E-10
FIINIT(STRZ)=1.0E-10 ;FIINIT(STRY)=1.0E-10
FIINIT(STRX)=1.0E-10 ;FIINIT(VISL)=1.0E-10
FIINIT(DRH1)=1.0E-10 ;FIINIT(PRPS)=160.
FIINIT(DISZ)=0. ;FIINIT(DISY)=0.
FIINIT(DISX)=0.
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(UP ,NWALL , 1, 10, 10, 10, 1, 10, 1, 1)
COVAL(UP ,DISY,1. ,0. )
PATCH(FORS01 ,SOUTH , 1, 10, 1, 1, 1, 10, 1, 1)
COVAL(FORS01 ,DISY, FIXFLU ,4.0E+07 )
PATCH(AXESXX ,WWALL , 1, 1, 1, 10, 1, 10, 1, 1)
COVAL(AXESXX ,DISX,1. ,0. )
PATCH(AXESZZ ,LWALL , 1, 10, 1, 10, 1, 1, 1, 1)
COVAL(AXESZZ ,DISZ,1. ,0. )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 100 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
LITER(DISZ)=20 ;LITER(DISY)=20
LITER(DISX)=20
ENDIT(DISZ)=1.0E-03 ;ENDIT(DISY)=1.0E-03
ENDIT(DISX)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(W1/T,LINRLX,1.)
RELAX(V1/T,LINRLX,1.)
RELAX(U1/T,LINRLX,1.)
RELAX(W1T,LINRLX,1.)
RELAX(V1T,LINRLX,1.)
RELAX(U1T,LINRLX,1.)
RELAX(EPSZ,LINRLX,1.)
RELAX(EPSX,LINRLX,1.)
RELAX(EPSY,LINRLX,1.)
RELAX(STYZ,LINRLX,1.)
RELAX(STXZ,LINRLX,1.)
RELAX(STXY,LINRLX,1.)
RELAX(STRZ,LINRLX,1.)
RELAX(STRY,LINRLX,1.)
RELAX(STRX,LINRLX,1.)
RELAX(VISL,LINRLX,1.)
RELAX(DRH1,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
RELAX(DISZ,FALSDT,1.0E+09)
RELAX(DISY,FALSDT,1.0E+09)
RELAX(DISX,FALSDT,1.0E+09)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(W1/T)=1.0E+10 ;VARMIN(W1/T)=-1.0E+10
VARMAX(V1/T)=1.0E+10 ;VARMIN(V1/T)=-1.0E+10
VARMAX(U1/T)=1.0E+10 ;VARMIN(U1/T)=-1.0E+10
VARMAX(W1T)=1.0E+10 ;VARMIN(W1T)=-1.0E+10
VARMAX(V1T)=1.0E+10 ;VARMIN(V1T)=-1.0E+10
VARMAX(U1T)=1.0E+10 ;VARMIN(U1T)=-1.0E+10
VARMAX(EPSZ)=1.0E+10 ;VARMIN(EPSZ)=-1.0E+10
VARMAX(EPSX)=1.0E+10 ;VARMIN(EPSX)=-1.0E+10
VARMAX(EPSY)=1.0E+10 ;VARMIN(EPSY)=-1.0E+10
VARMAX(STYZ)=1.0E+10 ;VARMIN(STYZ)=-1.0E+10
VARMAX(STXZ)=1.0E+10 ;VARMIN(STXZ)=-1.0E+10
VARMAX(STXY)=1.0E+10 ;VARMIN(STXY)=-1.0E+10
VARMAX(STRZ)=1.0E+10 ;VARMIN(STRZ)=-1.0E+10
VARMAX(STRY)=1.0E+10 ;VARMIN(STRY)=-1.0E+10
VARMAX(STRX)=1.0E+10 ;VARMIN(STRX)=-1.0E+10
VARMAX(VISL)=1.0E+10 ;VARMIN(VISL)=-1.0E+10
VARMAX(DRH1)=1.0E+10 ;VARMIN(DRH1)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(DISZ)=1.0E+10 ;VARMIN(DISZ)=-1.0E+10
VARMAX(DISY)=1.0E+10 ;VARMIN(DISY)=-1.0E+10
VARMAX(DISX)=1.0E+10 ;VARMIN(DISX)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
STRA = T
PARSOL = F
ISG21 = 100
ISG50 = 1
ISG52 = 3
ISG62 = 1
CSG10 ='Q1'
SPEDAT(SET,LONGNAME,P1,C,pressure_or_dilatation)
SPEDAT(SET,LONGNAME,PTH,C,dilatation_theoretical)
SPEDAT(SET,LONGNAME,ENUL,C,viscosity_or__LAME's_G*1.E11)
SPEDAT(SET,LONGNAME,VISL,C,viscosity_or__LAME's_G*1.E11)
SPEDAT(SET,LONGNAME,DRH1,C,compressibility_or_LAME's_L+G*1.E11)
SPEDAT(SET,LONGNAME,DVO1,C,th.exp.co_r_or_H*1.E11)
SPEDAT(SET,LONGNAME,U1,C,x-direction_velocity_or_displacement)
SPEDAT(SET,LONGNAME,EPSX,C,x-direction_strain)
SPEDAT(SET,LONGNAME,EXTH,C,x-direction_strain_theoretical)
SPEDAT(SET,LONGNAME,STRX,C,x-direction_stress)
SPEDAT(SET,LONGNAME,SXTH,C,x-direction_stress_theoretical)
SPEDAT(SET,LONGNAME,V1,C,y-direction_velocity_or_displacement)
SPEDAT(SET,LONGNAME,EPSY,C,y-direction_strain)
SPEDAT(SET,LONGNAME,EYTH,C,y-direction_strain_theoretical)
SPEDAT(SET,LONGNAME,STRY,C,y-direction_stress)
SPEDAT(SET,LONGNAME,SYTH,C,y-direction_stress_theoretical)
SPEDAT(SET,LONGNAME,W1,C,z-direction_velocity_or_displacement)
SPEDAT(SET,LONGNAME,EPSZ,C,z-direction_strain)
SPEDAT(SET,LONGNAME,STRZ,C,z-direction_stress)
SPEDAT(SET,LONGNAME,EZTH,C,z-direction_strain_theoretical)
SPEDAT(SET,LONGNAME,SZTH,C,z-direction_stress_theoretical)
SPEDAT(SET,LONGNAME,EPST,C,linearthermalexpansion)
SPEDAT(SET,STORED,W1T,C,=6.000001E-05*ZG!ZSLFIN)
SPEDAT(SET,STORED,U1T,C,=6.000001E-05*XG!ZSLFIN)
SPEDAT(SET,STORED,V1T,C,=-2.0E-04*(YG-0.12)!ZSLFIN)
SPEDAT(SET,STORED,U1/T,C,=DISX/(U1T+1.E-20)!ZSLFIN)
SPEDAT(SET,STORED,V1/T,C,=DISY/(V1T+1.E-20)!ZSLFIN)
SPEDAT(SET,STORED,W1/T,C,=DISZ/(W1T+1.E-20)!ZSLFIN)
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,MATERIAL,160,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(W1/T,Y,N,Y,N,N,N)
OUTPUT(V1/T,Y,N,Y,N,N,N)
OUTPUT(U1/T,Y,N,Y,N,N,N)
OUTPUT(W1T,Y,N,Y,N,N,N)
OUTPUT(V1T,Y,N,Y,N,N,N)
OUTPUT(U1T,Y,N,Y,N,N,N)
OUTPUT(EPSZ,Y,N,Y,N,N,N)
OUTPUT(EPSX,Y,N,Y,N,N,N)
OUTPUT(EPSY,Y,N,Y,N,N,N)
OUTPUT(STYZ,Y,N,Y,N,N,N)
OUTPUT(STXZ,Y,N,Y,N,N,N)
OUTPUT(STXY,Y,N,Y,N,N,N)
OUTPUT(STRZ,Y,N,Y,N,N,N)
OUTPUT(STRY,Y,N,Y,N,N,N)
OUTPUT(STRX,Y,N,Y,N,N,N)
OUTPUT(VISL,N,N,N,N,N,N)
OUTPUT(DRH1,N,N,N,N,N,N)
OUTPUT(PRPS,N,N,N,N,N,N)
OUTPUT(DISZ,Y,N,Y,Y,Y,Y)
OUTPUT(DISY,Y,N,Y,Y,Y,Y)
OUTPUT(DISX,Y,N,Y,Y,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 8 ;IYMON = 2 ;IZMON = 8
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP