TALK=T;RUN(1,1)
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(1/2/3D thermal stress in a cub; s302 )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 10
XULAST =1.
XFRAC(1)=0.1 ;XFRAC(2)=0.2
XFRAC(3)=0.3 ;XFRAC(4)=0.4
XFRAC(5)=0.5 ;XFRAC(6)=0.6
XFRAC(7)=0.7 ;XFRAC(8)=0.8
XFRAC(9)=0.9 ;XFRAC(10)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 1
YVLAST =1.
YFRAC(1)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 1
ZWLAST =1.
ZFRAC(1)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(131)=U1TH ;NAME(132)=EPSZ
NAME(133)=STRZ ;NAME(134)=EPSY
NAME(135)=STRY ;NAME(136)=EPSX
NAME(137)=STRX ;NAME(138)=EPST
NAME(139)=DRH1 ;NAME(140)=DVO1
NAME(141)=ENUL ;NAME(142)=DEN1
NAME(143)=PRPS ;NAME(144)=W1/T
NAME(145)=V1/T ;NAME(146)=U1/T
NAME(147)=TEM1 ;NAME(150)=DISX
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(U1TH,Y,N,N,N,N,N)
SOLUTN(EPSZ,Y,N,N,N,N,Y)
SOLUTN(STRZ,Y,N,N,N,N,Y)
SOLUTN(EPSY,Y,N,N,N,N,Y)
SOLUTN(STRY,Y,N,N,N,N,Y)
SOLUTN(EPSX,Y,N,N,N,N,Y)
SOLUTN(STRX,Y,N,N,N,N,Y)
SOLUTN(EPST,Y,N,N,N,N,Y)
SOLUTN(DRH1,Y,N,N,N,N,Y)
SOLUTN(DVO1,Y,N,N,N,N,Y)
SOLUTN(ENUL,Y,N,N,N,N,Y)
SOLUTN(DEN1,Y,N,N,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(W1/T,Y,N,N,N,N,Y)
SOLUTN(V1/T,Y,N,N,N,N,Y)
SOLUTN(U1/T,Y,N,N,N,N,Y)
SOLUTN(TEM1,Y,N,N,N,N,Y)
SOLUTN(DISX,Y,Y,Y,N,N,Y)
DEN1 = 142
VISL = 141
PRPS = 143
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(DISX,N,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =7800. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =1.0E-05 ;DRH1DP =5.0E-12
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =0.3 ;ENUT =0.
PRNDTL(DISX)=1.
PRT(DISX)=1.
CP1 =473. ;CP2 =1.
* List of user-defined materials to be read by EARTH
MATFLG=T;IMAT=1
* Name
*Ind. Dens. Viscos. Spec.heat Conduct. Expans. Compr.
*
160 7800.0 0.3 473.0 43.0 1.0E-5 0.5E-11
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(U1TH)=1.0E-10 ;FIINIT(EPSZ)=1.0E-10
FIINIT(STRZ)=1.0E-10 ;FIINIT(EPSY)=1.0E-10
FIINIT(STRY)=1.0E-10 ;FIINIT(EPSX)=1.0E-10
FIINIT(STRX)=1.0E-10 ;FIINIT(EPST)=1.0E-10
FIINIT(DRH1)=1.0E-10 ;FIINIT(DVO1)=1.0E-10
FIINIT(ENUL)=1.0E-10 ;FIINIT(DEN1)=1.0E-10
FIINIT(PRPS)=-100. ;FIINIT(W1/T)=1.0E-10
FIINIT(V1/T)=1.0E-10 ;FIINIT(U1/T)=1.0E-10
FIINIT(TEM1)=1.0E-10 ;FIINIT(DISX)=1.0E-10
PATCH(BLOCK ,INIVAL, 1, 10, 1, 1, 1, 1, 1, 1)
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(FIXMOV ,CELL , 5, 5, 1, 1, 1, 1, 1, 1)
COVAL(FIXMOV ,DISX,In-Form:source - see Grp 19)
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 200 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
LITER(DISX)=20
ENDIT(DISX)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(U1TH,LINRLX,1.)
RELAX(EPSZ,LINRLX,1.)
RELAX(STRZ,LINRLX,1.)
RELAX(EPSY,LINRLX,1.)
RELAX(STRY,LINRLX,1.)
RELAX(EPSX,LINRLX,1.)
RELAX(STRX,LINRLX,1.)
RELAX(EPST,LINRLX,1.)
RELAX(DRH1,LINRLX,1.)
RELAX(DVO1,LINRLX,1.)
RELAX(ENUL,LINRLX,1.)
RELAX(DEN1,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
RELAX(W1/T,LINRLX,1.)
RELAX(V1/T,LINRLX,1.)
RELAX(U1/T,LINRLX,1.)
RELAX(TEM1,LINRLX,1.)
RELAX(DISX,FALSDT,1.0E+09)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(U1TH)=1.0E+10 ;VARMIN(U1TH)=-1.0E+10
VARMAX(EPSZ)=1.0E+10 ;VARMIN(EPSZ)=-1.0E+10
VARMAX(STRZ)=1.0E+10 ;VARMIN(STRZ)=-1.0E+10
VARMAX(EPSY)=1.0E+10 ;VARMIN(EPSY)=-1.0E+10
VARMAX(STRY)=1.0E+10 ;VARMIN(STRY)=-1.0E+10
VARMAX(EPSX)=1.0E+10 ;VARMIN(EPSX)=-1.0E+10
VARMAX(STRX)=1.0E+10 ;VARMIN(STRX)=-1.0E+10
VARMAX(EPST)=1.0E+10 ;VARMIN(EPST)=-1.0E+10
VARMAX(DRH1)=1.0E+10 ;VARMIN(DRH1)=-1.0E+10
VARMAX(DVO1)=1.0E+10 ;VARMIN(DVO1)=-1.0E+10
VARMAX(ENUL)=1.0E+10 ;VARMIN(ENUL)=-1.0E+10
VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(W1/T)=1.0E+10 ;VARMIN(W1/T)=-1.0E+10
VARMAX(V1/T)=1.0E+10 ;VARMIN(V1/T)=-1.0E+10
VARMAX(U1/T)=1.0E+10 ;VARMIN(U1/T)=-1.0E+10
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
VARMAX(DISX)=1.0E+10 ;VARMIN(DISX)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
STRA = T
PARSOL = F
CONWIZ = T
ISG21 = 200
ISG50 = 1
ISG52 = 3
ISG62 = 1
CSG10 ='q1'
SPEDAT(SET,MATERIAL,160,L,T)
SPEDAT(SET,DOMAIN,PHASE_1_MAT,I,160)
SPEDAT(SET,DOMAIN,PROPS_FILE_1,C,Q1)
SPEDAT(SET,INITIAL,TEM1!BLOCK,C,=-0.5+1.*XG+0.*YG+0.*ZG)
SPEDAT(SET,INITIAL,PRPS!BLOCK,C,=160)
SPEDAT(SET,STORED,U1TH,C,=1.0E-05*((-0.5+1.*XG+0.*YG+0.*ZG)*XG-.5$)
SPEDAT(SET,STORED,U1TH,C,*1.*(XG^2+YG^2+ZG^2))!SWPS!ZSLFIN)
SPEDAT(SET,STORED,U1/T,C,=DISX/U1TH!ZSLFIN)
SPEDAT(SET,SOURCE,DISX!FIXMOV,C,=COVAL(1.0/VOL*(1.E4)&1.0E-05*((-$)
SPEDAT(SET,SOURCE,DISX!FIXMOV,C,0.5+1.*XG+0.*YG+0.*ZG)*XG-.5*1.*($)
SPEDAT(SET,SOURCE,DISX!FIXMOV,C,XG^2+YG^2+ZG^2))))
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,OBJNAM,!FIXMOV,C,FIXMOV)
SPEDAT(SET,OBJTYP,!FIXMOV,C,USER_DEFINED)
SPEDAT(SET,FACETDAT,NUMOBJ,I,1)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(U1TH,Y,N,Y,N,N,N)
OUTPUT(EPSZ,Y,N,Y,N,N,N)
OUTPUT(STRZ,Y,N,Y,N,N,N)
OUTPUT(EPSY,Y,N,Y,N,N,N)
OUTPUT(STRY,Y,N,Y,N,N,N)
OUTPUT(EPSX,Y,N,Y,N,N,N)
OUTPUT(STRX,Y,N,Y,N,N,N)
OUTPUT(EPST,Y,N,Y,N,N,N)
OUTPUT(DRH1,N,N,N,N,N,N)
OUTPUT(DVO1,N,N,N,N,N,N)
OUTPUT(ENUL,N,N,N,N,N,N)
OUTPUT(DEN1,N,N,N,N,N,N)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(W1/T,Y,N,Y,N,N,N)
OUTPUT(V1/T,Y,N,Y,N,N,N)
OUTPUT(U1/T,Y,N,Y,N,N,N)
OUTPUT(TEM1,Y,N,Y,N,N,N)
OUTPUT(DISX,Y,N,Y,Y,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 9 ;IYMON = 1 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP