TALK=T;RUN(1,1)
DISPLAY
Problem: Torsion of the long thin Beam (Plate).
1. Comparison - a analytical solution (Timoshenko, Paragraph 108)
2. Bottom of the beam is fixed (U1=V1=W1 = 0),
Top - set tangential stress TauYZ for V1.
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(3D TORSION of thin Beam; s305 )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 6
XULAST =2.0E-03
XFRAC(1)=0.166667 ;XFRAC(2)=0.333333
XFRAC(3)=0.5 ;XFRAC(4)=0.666667
XFRAC(5)=0.833333 ;XFRAC(6)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 8
YVLAST =1.0E-02
YFRAC(1)=0.125 ;YFRAC(2)=0.25
YFRAC(3)=0.375 ;YFRAC(4)=0.5
YFRAC(5)=0.625 ;YFRAC(6)=0.75
YFRAC(7)=0.875 ;YFRAC(8)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 12
ZWLAST =0.05
ZFRAC(1)=0.083333 ;ZFRAC(2)=0.166667
ZFRAC(3)=0.25 ;ZFRAC(4)=0.333333
ZFRAC(5)=0.416667 ;ZFRAC(6)=0.5
ZFRAC(7)=0.583333 ;ZFRAC(8)=0.666667
ZFRAC(9)=0.75 ;ZFRAC(10)=0.833333
ZFRAC(11)=0.916667 ;ZFRAC(12)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(3)=U1
NAME(5)=V1 ;NAME(7)=W1
NAME(135)=V1/T ;NAME(136)=U1/T
NAME(137)=V1T ;NAME(138)=U1T
NAME(139)=EPSZ ;NAME(140)=EPSX
NAME(141)=EPSY ;NAME(142)=STYZ
NAME(143)=STXZ ;NAME(144)=STXY
NAME(145)=STRZ ;NAME(146)=STRY
NAME(147)=STRX ;NAME(148)=VISL
NAME(149)=DRH1 ;NAME(150)=PRPS
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,Y,N,N,N)
SOLUTN(U1,Y,Y,Y,N,N,Y)
SOLUTN(V1,Y,Y,Y,N,N,Y)
SOLUTN(W1,Y,Y,Y,N,N,Y)
SOLUTN(V1/T,Y,N,N,N,N,Y)
SOLUTN(U1/T,Y,N,N,N,N,Y)
SOLUTN(V1T,Y,N,N,N,N,Y)
SOLUTN(U1T,Y,N,N,N,N,Y)
SOLUTN(EPSZ,Y,N,N,N,N,Y)
SOLUTN(EPSX,Y,N,N,N,N,Y)
SOLUTN(EPSY,Y,N,N,N,N,Y)
SOLUTN(STYZ,Y,N,N,N,N,Y)
SOLUTN(STXZ,Y,N,N,N,N,Y)
SOLUTN(STXY,Y,N,N,N,N,Y)
SOLUTN(STRZ,Y,N,N,N,N,Y)
SOLUTN(STRY,Y,N,N,N,N,Y)
SOLUTN(STRX,Y,N,N,N,N,Y)
SOLUTN(VISL,Y,N,N,N,N,Y)
SOLUTN(DRH1,Y,N,N,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
VISL = 148
PRPS = 150
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(U1,Y,Y,Y,Y,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1.0E-05 ;ENUT =0.
PRNDTL(U1)=1. ;PRNDTL(V1)=1.
PRNDTL(W1)=1.
PRT(U1)=1. ;PRT(V1)=1.
PRT(W1)=1.
CP1 =1. ;CP2 =1.
* List of user-defined materials to be read by EARTH
MATFLG=T;IMAT=1
* Name
*Ind. Dens. Viscos. Spec.heat Conduct. Expans. Compr.
*
160 7800.0 0.3 473.0 43.0 1.0E-5 0.5E-11
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=0. ;FIINIT(U1)=0.
FIINIT(V1)=0. ;FIINIT(W1)=0.
FIINIT(V1/T)=1.0E-10 ;FIINIT(U1/T)=1.0E-10
FIINIT(V1T)=1.0E-10 ;FIINIT(U1T)=1.0E-10
FIINIT(EPSZ)=1.0E-10 ;FIINIT(EPSX)=1.0E-10
FIINIT(EPSY)=1.0E-10 ;FIINIT(STYZ)=1.0E-10
FIINIT(STXZ)=1.0E-10 ;FIINIT(STXY)=1.0E-10
FIINIT(STRZ)=1.0E-10 ;FIINIT(STRY)=1.0E-10
FIINIT(STRX)=1.0E-10 ;FIINIT(VISL)=1.0E-10
FIINIT(DRH1)=1.0E-10 ;FIINIT(PRPS)=160.
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(DOWNZ ,LWALL , 1, 6, 1, 8, 1, 1, 1, 1)
COVAL(DOWNZ ,W1 , FIXVAL ,0. )
PATCH(DOWN0X ,CELL , 1, 5, 1, 8, 1, 1, 1, 1)
COVAL(DOWN0X ,U1 ,In-Form:source - see Grp 19)
PATCH(DOWN0Y ,CELL , 1, 6, 1, 7, 1, 1, 1, 1)
COVAL(DOWN0Y ,V1 ,In-Form:source - see Grp 19)
PATCH(UP0Y ,HIGH , 1, 6, 1, 8, 12, 12, 1, 1)
COVAL(UP0Y ,V1 ,In-Form:source - see Grp 19)
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 4500 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-07
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(U1)=20
LITER(V1)=20 ;LITER(W1)=20
ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,1.)
RELAX(U1,FALSDT,1.)
RELAX(V1,FALSDT,1.)
RELAX(W1,FALSDT,1.)
RELAX(V1/T,LINRLX,1.)
RELAX(U1/T,LINRLX,1.)
RELAX(V1T,LINRLX,1.)
RELAX(U1T,LINRLX,1.)
RELAX(EPSZ,LINRLX,1.)
RELAX(EPSX,LINRLX,1.)
RELAX(EPSY,LINRLX,1.)
RELAX(STYZ,LINRLX,1.)
RELAX(STXZ,LINRLX,1.)
RELAX(STXY,LINRLX,1.)
RELAX(STRZ,LINRLX,1.)
RELAX(STRY,LINRLX,1.)
RELAX(STRX,LINRLX,1.)
RELAX(VISL,LINRLX,1.)
RELAX(DRH1,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(V1/T)=1.0E+10 ;VARMIN(V1/T)=-1.0E+10
VARMAX(U1/T)=1.0E+10 ;VARMIN(U1/T)=-1.0E+10
VARMAX(V1T)=1.0E+10 ;VARMIN(V1T)=-1.0E+10
VARMAX(U1T)=1.0E+10 ;VARMIN(U1T)=-1.0E+10
VARMAX(EPSZ)=1.0E+10 ;VARMIN(EPSZ)=-1.0E+10
VARMAX(EPSX)=1.0E+10 ;VARMIN(EPSX)=-1.0E+10
VARMAX(EPSY)=1.0E+10 ;VARMIN(EPSY)=-1.0E+10
VARMAX(STYZ)=1.0E+10 ;VARMIN(STYZ)=-1.0E+10
VARMAX(STXZ)=1.0E+10 ;VARMIN(STXZ)=-1.0E+10
VARMAX(STXY)=1.0E+10 ;VARMIN(STXY)=-1.0E+10
VARMAX(STRZ)=1.0E+10 ;VARMIN(STRZ)=-1.0E+10
VARMAX(STRY)=1.0E+10 ;VARMIN(STRY)=-1.0E+10
VARMAX(STRX)=1.0E+10 ;VARMIN(STRX)=-1.0E+10
VARMAX(VISL)=1.0E+10 ;VARMIN(VISL)=-1.0E+10
VARMAX(DRH1)=1.0E+10 ;VARMIN(DRH1)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
STRA = T
PARSOL = F
ISG21 = 4500
ISG52 = 1
ISG62 = 1
CSG10 ='Q1'
SPEDAT(SET,SOURCE,U1!DOWN0X,C,=COVAL(2.0E+10&-9.749999E-03*ZG*(YG$)
SPEDAT(SET,SOURCE,U1!DOWN0X,C,-0.5*1.0E-02)))
SPEDAT(SET,SOURCE,V1!DOWN0Y,C,=COVAL(2.0E+10&9.749999E-03*ZG*(XG-$)
SPEDAT(SET,SOURCE,V1!DOWN0Y,C,0.5*2.0E-03)))
SPEDAT(SET,SOURCE,V1!UP0Y,C,=COVAL(2.0E-10&3.0E+09*(XG-0.5*2.0E-0$)
SPEDAT(SET,SOURCE,V1!UP0Y,C,3)))
SPEDAT(SET,STORED,U1T,C,=-9.749999E-03*ZG*(YG-0.5*1.0E-02)!ZSLFIN)
SPEDAT(SET,STORED,V1T,C,=9.749999E-03*ZG*(XG-0.5*2.0E-03)!ZSLFIN)
SPEDAT(SET,STORED,U1/T,C,=U1/(U1T+1.E-20)!ZSLFIN)
SPEDAT(SET,STORED,V1/T,C,=V1/(V1T+1.E-20)!ZSLFIN)
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,MATERIAL,160,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(U1,Y,N,Y,Y,Y,Y)
OUTPUT(V1,Y,N,Y,Y,Y,Y)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(V1/T,Y,N,Y,N,N,N)
OUTPUT(U1/T,Y,N,Y,N,N,N)
OUTPUT(V1T,Y,N,Y,N,N,N)
OUTPUT(U1T,Y,N,Y,N,N,N)
OUTPUT(EPSZ,Y,N,Y,N,N,N)
OUTPUT(EPSX,Y,N,Y,N,N,N)
OUTPUT(EPSY,Y,N,Y,N,N,N)
OUTPUT(STYZ,Y,N,Y,N,N,N)
OUTPUT(STXZ,Y,N,Y,N,N,N)
OUTPUT(STXY,Y,N,Y,N,N,N)
OUTPUT(STRZ,Y,N,Y,N,N,N)
OUTPUT(STRY,Y,N,Y,N,N,N)
OUTPUT(STRX,Y,N,Y,N,N,N)
OUTPUT(VISL,Y,N,Y,N,N,N)
OUTPUT(DRH1,Y,N,Y,N,N,N)
OUTPUT(PRPS,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 4 ;IYMON = 2 ;IZMON = 10
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = 1 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = 1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP