TALK=T;RUN(1,1)
  DISPLAY
    Stresses are considered in rotating disk with StrZ = 0:
     Omega   - Angular velocity of the rotation,
     DenBody - density,
     RO      - radius of disk.
    Exact solution (Timoshenko, paragraph 32):

     V = DenBody*Omega^2*RO^3 * (1-P)/8/E * { R1*(3+P) -
         R1^3*(1+P) },
     R1 = R/RO

  ENDDIS
    PHOTON USE
  p;;;;



  set prop off
  cl
  msg PRPS field
  gr ou z 1
  con prps z 1  fi;1.0

  pause
  cl
  msg x-displacement field
  gr ou z 1
  con U1 z 1  fi;.0001
  vec z 1  col 0

  pause
  cl
  msg y-displacement field
  gr ou z 1
  con V1 z 1 fi;.0001

  pause
  cl
  msg epsx field
  gr ou z 1
  con epsx z 1 fi;.0001

  pause
  cl
  msg epsy field
  gr ou z 1
  con epsy z 1 fi;.0001

  pause
  cl
  msg strx field
  gr ou z 1
  con strx z 1 fi;.0001

  pause
  cl
  msg stry field
  gr ou z 1
  con stry z 1 fi;.0001

  ENDUSE
  READQ1_BEGIN
  Declarations and settings



  READQ1_END
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Stress in a rotating disk; 2D[x,y]      )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = F
 NX = 10
 XULAST =1.
 XFRAC(1)=0.1 ;XFRAC(2)=0.2
 XFRAC(3)=0.3 ;XFRAC(4)=0.4
 XFRAC(5)=0.5 ;XFRAC(6)=0.6
 XFRAC(7)=0.7 ;XFRAC(8)=0.8
 XFRAC(9)=0.9 ;XFRAC(10)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 31
 YVLAST =0.1
 YFRAC(1)=0.032258 ;YFRAC(2)=0.064516
 YFRAC(3)=0.096774 ;YFRAC(4)=0.129032
 YFRAC(5)=0.16129 ;YFRAC(6)=0.193548
 YFRAC(7)=0.225806 ;YFRAC(8)=0.258065
 YFRAC(9)=0.290323 ;YFRAC(10)=0.322581
 YFRAC(11)=0.354839 ;YFRAC(12)=0.387097
 YFRAC(13)=0.419355 ;YFRAC(14)=0.451613
 YFRAC(15)=0.483871 ;YFRAC(16)=0.516129
 YFRAC(17)=0.548387 ;YFRAC(18)=0.580645
 YFRAC(19)=0.612903 ;YFRAC(20)=0.645161
 YFRAC(21)=0.677419 ;YFRAC(22)=0.709677
 YFRAC(23)=0.741935 ;YFRAC(24)=0.774194
 YFRAC(25)=0.806452 ;YFRAC(26)=0.83871
 YFRAC(27)=0.870968 ;YFRAC(28)=0.903226
 YFRAC(29)=0.935484 ;YFRAC(30)=0.967742
 YFRAC(31)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(139)=V1/T
 NAME(140)=V1TH ;NAME(141)=EPSZ
 NAME(142)=EPSY ;NAME(143)=STRY
 NAME(144)=EPSX ;NAME(145)=STRX
 NAME(146)=DRH1 ;NAME(147)=DVO1
 NAME(148)=ENUL ;NAME(149)=DEN1
 NAME(150)=PRPS
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(V1/T,Y,N,N,N,N,Y)
 SOLUTN(V1TH,Y,N,N,N,N,Y)
 SOLUTN(EPSZ,Y,N,N,N,N,Y)
 SOLUTN(EPSY,Y,N,N,N,N,Y)
 SOLUTN(STRY,Y,N,N,N,N,Y)
 SOLUTN(EPSX,Y,N,N,N,N,Y)
 SOLUTN(STRX,Y,N,N,N,N,Y)
 SOLUTN(DRH1,Y,N,N,N,N,Y)
 SOLUTN(DVO1,Y,N,N,N,N,Y)
 SOLUTN(ENUL,Y,N,N,N,N,Y)
 SOLUTN(DEN1,Y,N,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 DEN1 = 149
 VISL = 148
 PRPS = 150
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 CP1 =1. ;CP2 =1.
   *  List of user-defined materials to be read by EARTH
    MATFLG=T;IMAT=1   
   *  Name
   *Ind. Dens.  Viscos.  Spec.heat  Conduct.  Expans.  Compr.
   *  
    160 7800.0 0.3 473.0 43.0 1.0E-5 0.5E-11
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(V1/T)=1.0E-10
 FIINIT(V1TH)=1.0E-10 ;FIINIT(EPSZ)=1.0E-10
 FIINIT(EPSY)=1.0E-10 ;FIINIT(STRY)=1.0E-10
 FIINIT(EPSX)=1.0E-10 ;FIINIT(STRX)=1.0E-10
 FIINIT(DRH1)=1.0E-10 ;FIINIT(DVO1)=1.0E-10
 FIINIT(ENUL)=1.0E-10 ;FIINIT(DEN1)=1.0E-10
 FIINIT(PRPS)=160.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(BODY ,VOLUME, 1, 10, 1, 30, 1, 1, 1, 1)
 COVAL(BODY ,V1 ,In-Form:source - see Grp 19)
 
 PATCH(LOWX ,WWALL , 1, 1, 1, 31, 1, 1, 1, 1)
 COVAL(LOWX ,U1 , FIXVAL ,0. )
 
 PATCH(HIGHX ,EWALL , 9, 9, 1, 31, 1, 1, 1, 1)
 COVAL(HIGHX ,U1 , FIXVAL ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 200 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-07
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=0.
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(V1/T,LINRLX,1.)
 RELAX(V1TH,LINRLX,1.)
 RELAX(EPSZ,LINRLX,1.)
 RELAX(EPSY,LINRLX,1.)
 RELAX(STRY,LINRLX,1.)
 RELAX(EPSX,LINRLX,1.)
 RELAX(STRX,LINRLX,1.)
 RELAX(DRH1,LINRLX,1.)
 RELAX(DVO1,LINRLX,1.)
 RELAX(ENUL,LINRLX,1.)
 RELAX(DEN1,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(V1/T)=1.0E+10 ;VARMIN(V1/T)=-1.0E+10
 VARMAX(V1TH)=1.0E+10 ;VARMIN(V1TH)=-1.0E+10
 VARMAX(EPSZ)=1.0E+10 ;VARMIN(EPSZ)=-1.0E+10
 VARMAX(EPSY)=1.0E+10 ;VARMIN(EPSY)=-1.0E+10
 VARMAX(STRY)=1.0E+10 ;VARMIN(STRY)=-1.0E+10
 VARMAX(EPSX)=1.0E+10 ;VARMIN(EPSX)=-1.0E+10
 VARMAX(STRX)=1.0E+10 ;VARMIN(STRX)=-1.0E+10
 VARMAX(DRH1)=1.0E+10 ;VARMIN(DRH1)=-1.0E+10
 VARMAX(DVO1)=1.0E+10 ;VARMIN(DVO1)=-1.0E+10
 VARMAX(ENUL)=1.0E+10 ;VARMIN(ENUL)=-1.0E+10
 VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 READQ1 = T
 STRA = T
 PARSOL = F
 CONWIZ = T
 ISG21 = 200
 ISG52 = 3
 ISG59 = 1
 ISG62 = 1
 CSG10   ='Q1'
 SPEDAT(SET,SOURCE,V1!BODY,C,=COVAL(2.0E-10&2.760688E+09*RV))
 SPEDAT(SET,RLXFAC,RLXV1D,R,0.5)
 SPEDAT(SET,STORED,V1TH,C,=1.207801E-06*(RV*33.-1299.999878*RV^3)!$)
 SPEDAT(SET,STORED,V1TH,C,ZSLFIN)
 SPEDAT(SET,STORED,V1/T,C,=V1/V1TH!ZSLFIN)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,MATERIAL,160,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1/T,Y,N,Y,N,N,N)
 OUTPUT(V1TH,Y,N,Y,N,N,N)
 OUTPUT(EPSZ,Y,N,Y,N,N,N)
 OUTPUT(EPSY,Y,N,Y,N,N,N)
 OUTPUT(STRY,Y,N,Y,N,N,N)
 OUTPUT(EPSX,Y,N,Y,N,N,N)
 OUTPUT(STRX,Y,N,Y,N,N,N)
 OUTPUT(DRH1,N,N,N,N,N,N)
 OUTPUT(DVO1,N,N,N,N,N,N)
 OUTPUT(ENUL,N,N,N,N,N,N)
 OUTPUT(DEN1,N,N,N,N,N,N)
 OUTPUT(PRPS,N,N,N,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 1 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 31
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP