TALK=T;RUN(1,1)
DISPLAY
A cubical block is subjected to y-direction tension, under
three possible lateral-constraint conditions:
1. no constraint
2. lateral displacement in x and z directions prevented
3. lateral displacement prevented only in x direction
Because the y-direction displacements depend only on y, NX and NZ,
the number of x- and z-direction intervals, are both set to 1.
The boolean variable 'direct' toggles which end is fixed and which
is pulled.
The stresses and strains are calculated; and their textbook
values also. the former divided by the latter are printed as:
SX/T, EX/T, etc, the values of which should be close to 1.0
(but they will be printed as 0.0 if the theoretical value 0.0)
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(Cube in Y-direction tension; S102 )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 1
XULAST =1.
XFRAC(1)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 10
YVLAST =10.
YFRAC(1)=0.1 ;YFRAC(2)=0.2
YFRAC(3)=0.3 ;YFRAC(4)=0.4
YFRAC(5)=0.5 ;YFRAC(6)=0.6
YFRAC(7)=0.7 ;YFRAC(8)=0.8
YFRAC(9)=0.9 ;YFRAC(10)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 1
ZWLAST =1.
ZFRAC(1)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(5)=V1
NAME(127)=EZ/T ;NAME(128)=EY/T
NAME(129)=EX/T ;NAME(130)=SZ/T
NAME(131)=SY/T ;NAME(132)=SX/T
NAME(133)=EZTH ;NAME(134)=EPSZ
NAME(135)=EYTH ;NAME(136)=EPSY
NAME(137)=EXTH ;NAME(138)=EPSX
NAME(139)=SZTH ;NAME(140)=STRZ
NAME(141)=SYTH ;NAME(142)=STRY
NAME(143)=SXTH ;NAME(144)=STRX
NAME(145)=P1TH ;NAME(146)=DRH1
NAME(147)=DVO1 ;NAME(148)=ENUL
NAME(149)=DEN1 ;NAME(150)=PRPS
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,N,N,N,Y)
SOLUTN(V1,Y,Y,N,N,N,Y)
SOLUTN(EZ/T,Y,N,N,N,N,N)
SOLUTN(EY/T,Y,N,N,N,N,N)
SOLUTN(EX/T,Y,N,N,N,N,N)
SOLUTN(SZ/T,Y,N,N,N,N,N)
SOLUTN(SY/T,Y,N,N,N,N,N)
SOLUTN(SX/T,Y,N,N,N,N,N)
SOLUTN(EZTH,Y,N,N,N,N,Y)
SOLUTN(EPSZ,Y,N,N,N,N,Y)
SOLUTN(EYTH,Y,N,N,N,N,Y)
SOLUTN(EPSY,Y,N,N,N,N,Y)
SOLUTN(EXTH,Y,N,N,N,N,Y)
SOLUTN(EPSX,Y,N,N,N,N,Y)
SOLUTN(SZTH,Y,N,N,N,N,Y)
SOLUTN(STRZ,Y,N,N,N,N,Y)
SOLUTN(SYTH,Y,N,N,N,N,Y)
SOLUTN(STRY,Y,N,N,N,N,Y)
SOLUTN(SXTH,Y,N,N,N,N,Y)
SOLUTN(STRX,Y,N,N,N,N,Y)
SOLUTN(P1TH,Y,N,N,N,N,Y)
SOLUTN(DRH1,Y,N,N,N,N,Y)
SOLUTN(DVO1,Y,N,N,N,N,Y)
SOLUTN(ENUL,Y,N,N,N,N,Y)
SOLUTN(DEN1,Y,N,N,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
DEN1 = 149
VISL = 148
PRPS = 150
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =7800. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =3.7E-06 ;DRH1DP =5.0E-12
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =0.3 ;ENUT =0.
PRNDTL(V1)=1.
PRT(V1)=1.
CP1 =473. ;CP2 =1.
* List of user-defined materials to be read by EARTH
MATFLG=T;IMAT=1
* Name
*Ind. Dens. Viscos. Spec.heat Conduct. Expans. Compr.
*
160 7800.0 0.3 473.0 43.0 0.37E-5 0.5E-11
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=0. ;FIINIT(V1)=0.
FIINIT(EZ/T)=1.0E-10 ;FIINIT(EY/T)=1.0E-10
FIINIT(EX/T)=1.0E-10 ;FIINIT(SZ/T)=1.0E-10
FIINIT(SY/T)=1.0E-10 ;FIINIT(SX/T)=1.0E-10
FIINIT(EZTH)=-1.234E-11 ;FIINIT(EPSZ)=1.001E-10
FIINIT(EYTH)=-1.234E-11 ;FIINIT(EPSY)=1.001E-10
FIINIT(EXTH)=-1.234E-11 ;FIINIT(EPSX)=1.001E-10
FIINIT(SZTH)=-1.234E-11 ;FIINIT(STRZ)=1.001E-10
FIINIT(SYTH)=-1.234E-11 ;FIINIT(STRY)=1.001E-10
FIINIT(SXTH)=-1.234E-11 ;FIINIT(STRX)=1.001E-10
FIINIT(P1TH)=1.001E-10 ;FIINIT(DRH1)=1.001E-10
FIINIT(DVO1)=1.001E-10 ;FIINIT(ENUL)=1.001E-10
FIINIT(DEN1)=1.001E-10 ;FIINIT(PRPS)=160.
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(SFOR ,SOUTH , 1, 1, 1, 1, 1, 1, 1, 1)
COVAL(SFOR ,V1 ,In-Form:source - see Grp 19)
PATCH(NFIX ,NWALL , 1, 1, 10, 10, 1, 1, 1, 1)
COVAL(NFIX ,V1 ,In-Form:source - see Grp 19)
PATCH(INF1 ,NORTH , 1, 1, 10, 10, 1, 1, 1, 1)
COVAL(INF1 ,V1 ,In-Form:source - see Grp 19)
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 10 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-03
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(V1)=10
ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,1.)
RELAX(V1,FALSDT,1.)
RELAX(EZ/T,LINRLX,1.)
RELAX(EY/T,LINRLX,1.)
RELAX(EX/T,LINRLX,1.)
RELAX(SZ/T,LINRLX,1.)
RELAX(SY/T,LINRLX,1.)
RELAX(SX/T,LINRLX,1.)
RELAX(EZTH,LINRLX,1.)
RELAX(EPSZ,LINRLX,1.)
RELAX(EYTH,LINRLX,1.)
RELAX(EPSY,LINRLX,1.)
RELAX(EXTH,LINRLX,1.)
RELAX(EPSX,LINRLX,1.)
RELAX(SZTH,LINRLX,1.)
RELAX(STRZ,LINRLX,1.)
RELAX(SYTH,LINRLX,1.)
RELAX(STRY,LINRLX,1.)
RELAX(SXTH,LINRLX,1.)
RELAX(STRX,LINRLX,1.)
RELAX(P1TH,LINRLX,1.)
RELAX(DRH1,LINRLX,1.)
RELAX(DVO1,LINRLX,1.)
RELAX(ENUL,LINRLX,1.)
RELAX(DEN1,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(EZ/T)=1.0E+10 ;VARMIN(EZ/T)=-1.0E+10
VARMAX(EY/T)=1.0E+10 ;VARMIN(EY/T)=-1.0E+10
VARMAX(EX/T)=1.0E+10 ;VARMIN(EX/T)=-1.0E+10
VARMAX(SZ/T)=1.0E+10 ;VARMIN(SZ/T)=-1.0E+10
VARMAX(SY/T)=1.0E+10 ;VARMIN(SY/T)=-1.0E+10
VARMAX(SX/T)=1.0E+10 ;VARMIN(SX/T)=-1.0E+10
VARMAX(EZTH)=1.0E+10 ;VARMIN(EZTH)=-1.0E+10
VARMAX(EPSZ)=1.0E+10 ;VARMIN(EPSZ)=-1.0E+10
VARMAX(EYTH)=1.0E+10 ;VARMIN(EYTH)=-1.0E+10
VARMAX(EPSY)=1.0E+10 ;VARMIN(EPSY)=-1.0E+10
VARMAX(EXTH)=1.0E+10 ;VARMIN(EXTH)=-1.0E+10
VARMAX(EPSX)=1.0E+10 ;VARMIN(EPSX)=-1.0E+10
VARMAX(SZTH)=1.0E+10 ;VARMIN(SZTH)=-1.0E+10
VARMAX(STRZ)=1.0E+10 ;VARMIN(STRZ)=-1.0E+10
VARMAX(SYTH)=1.0E+10 ;VARMIN(SYTH)=-1.0E+10
VARMAX(STRY)=1.0E+10 ;VARMIN(STRY)=-1.0E+10
VARMAX(SXTH)=1.0E+10 ;VARMIN(SXTH)=-1.0E+10
VARMAX(STRX)=1.0E+10 ;VARMIN(STRX)=-1.0E+10
VARMAX(P1TH)=1.0E+10 ;VARMIN(P1TH)=-1.0E+10
VARMAX(DRH1)=1.0E+10 ;VARMIN(DRH1)=-1.0E+10
VARMAX(DVO1)=1.0E+10 ;VARMIN(DVO1)=-1.0E+10
VARMAX(ENUL)=1.0E+10 ;VARMIN(ENUL)=-1.0E+10
VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
STRA = T
PARSOL = F
ISG21 = 10
ISG50 = 1
ISG52 = 1
ISG62 = 1
CSG10 ='q1'
SPEDAT(SET,DOMAIN,PHASE_1_MAT,I,160)
SPEDAT(SET,DOMAIN,PROPS_FILE_1,C,Q1)
SPEDAT(SET,BOUNDARY,XCONST,R,1.0E+20)
SPEDAT(SET,BOUNDARY,ZCONST,R,1.0E+20)
SPEDAT(SET,STORED,SXTH,C,=4.285714E+08!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,SYTH,C,=1.0E+09!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,SZTH,C,=4.285714E+08!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,EXTH,C,=0.!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,EYTH,C,=3.714286E-03!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,EZTH,C,=0.!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,P1TH,C,=0.!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,P1TH,C,=3.714286E-03!ZSLFIN)
SPEDAT(SET,STORED,SX/T,C,=STRX/SXTH!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,SY/T,C,=STRY/SYTH!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,SZ/T,C,=STRZ/SZTH!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,EX/T,C,=EPSX/EXTH!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,EY/T,C,=EPSY/EYTH!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,EZ/T,C,=EPSZ/EZTH!IMAT>100!ZSLFIN)
SPEDAT(SET,SOURCE,V1!NFIX,C,=COVAL(1.0/ANORTH*(1.0)&0.0))
SPEDAT(SET,SOURCE,V1!SFOR,C,=COVAL(2.0E-10&1.0/ANORTH*(-1*1.0E+09)))
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,OBJNAM,!SFOR,C,SFOR)
SPEDAT(SET,OBJTYP,!SFOR,C,USER_DEFINED)
SPEDAT(SET,OBJNAM,!NFIX,C,NFIX)
SPEDAT(SET,OBJTYP,!NFIX,C,USER_DEFINED)
SPEDAT(SET,FACETDAT,NUMOBJ,I,4)
SPEDAT(SET,OBJNAM,!INF1,C,NFIX)
SPEDAT(SET,OBJTYP,!INF1,C,USER_DEFINED)
SPEDAT(SET,MATERIAL,160,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(V1,Y,N,Y,Y,Y,Y)
OUTPUT(EZ/T,Y,N,Y,N,N,N)
OUTPUT(EY/T,Y,N,Y,N,N,N)
OUTPUT(EX/T,Y,N,Y,N,N,N)
OUTPUT(SZ/T,Y,N,Y,N,N,N)
OUTPUT(SY/T,Y,N,Y,N,N,N)
OUTPUT(SX/T,Y,N,Y,N,N,N)
OUTPUT(EZTH,Y,N,Y,N,N,N)
OUTPUT(EPSZ,Y,N,Y,N,N,N)
OUTPUT(EYTH,Y,N,Y,N,N,N)
OUTPUT(EPSY,Y,N,Y,N,N,N)
OUTPUT(EXTH,Y,N,Y,N,N,N)
OUTPUT(EPSX,Y,N,Y,N,N,N)
OUTPUT(SZTH,Y,N,Y,N,N,N)
OUTPUT(STRZ,Y,N,Y,N,N,N)
OUTPUT(SYTH,Y,N,Y,N,N,N)
OUTPUT(STRY,Y,N,Y,N,N,N)
OUTPUT(SXTH,Y,N,Y,N,N,N)
OUTPUT(STRX,Y,N,Y,N,N,N)
OUTPUT(P1TH,Y,N,Y,N,N,N)
OUTPUT(DRH1,Y,N,Y,N,N,N)
OUTPUT(DVO1,Y,N,Y,N,N,N)
OUTPUT(ENUL,Y,N,Y,N,N,N)
OUTPUT(DEN1,Y,N,Y,N,N,N)
OUTPUT(PRPS,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 4 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP