TALK=T;RUN(1,1)
   PHOTON USE
   AUTOPLOT
   FILE
   PHI 5

   CL;DA 1 TEM1;DA 1 T3;COL3 1;BLB4 2;REDR
   MSG    Temperature (curve) and T3 (crosses) profiles
   ENDUSE
  DISPLAY
   The problem is as for case r202; but
   1. the solid walls at the boundaries are both thicker and divided
      into five cells each;

   2. The heat conduction due to true (ie not T3) temperature
      gradients, which was switched off in r202, is swiched back on
      again;

   3. In-Form "stored" statements are used for eliciting print-out
      of coefficients, which is useful for checking correctness.

   4. Also printed is the variable #3-1, which is the value of
      t3-tem1. This should ideally be zero in the solid regions;
      but differences of a few degrees will be noted.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(IMMERSOL 1D Radiative equilibrium   :202)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 20
 YVLAST =2.
 YFRAC(1)=0.05 ;YFRAC(2)=0.1
 YFRAC(3)=0.15 ;YFRAC(4)=0.2
 YFRAC(5)=0.25 ;YFRAC(6)=0.3
 YFRAC(7)=0.35 ;YFRAC(8)=0.4
 YFRAC(9)=0.45 ;YFRAC(10)=0.5
 YFRAC(11)=0.55 ;YFRAC(12)=0.6
 YFRAC(13)=0.65 ;YFRAC(14)=0.7
 YFRAC(15)=0.75 ;YFRAC(16)=0.8
 YFRAC(17)=0.85 ;YFRAC(18)=0.9
 YFRAC(19)=0.95 ;YFRAC(20)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(135)=#AN3 ;NAME(136)=#AN1
 NAME(137)=#AP3 ;NAME(138)=#AP1
 NAME(139)=#RS3 ;NAME(140)=#RS1
 NAME(141)=#3-1 ;NAME(142)=QRY
 NAME(143)=PRPS ;NAME(144)=TEM1
 NAME(145)=LTLS ;NAME(146)=WDIS
 NAME(147)=WGAP ;NAME(148)=T3
 NAME(149)=SCAT ;NAME(150)=EMIS
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(#AN3,Y,N,N,N,N,N)
 SOLUTN(#AN1,Y,N,N,N,N,N)
 SOLUTN(#AP3,Y,N,N,N,N,N)
 SOLUTN(#AP1,Y,N,N,N,N,N)
 SOLUTN(#RS3,Y,N,N,N,N,N)
 SOLUTN(#RS1,Y,N,N,N,N,N)
 SOLUTN(#3-1,Y,N,N,N,N,N)
 SOLUTN(QRY,Y,N,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 SOLUTN(TEM1,Y,Y,N,N,N,Y)
 SOLUTN(LTLS,Y,Y,Y,N,N,Y)
 SOLUTN(WDIS,Y,N,N,N,N,N)
 SOLUTN(WGAP,Y,N,N,N,N,Y)
 SOLUTN(T3,Y,Y,N,N,N,Y)
 SOLUTN(SCAT,Y,N,N,N,N,Y)
 SOLUTN(EMIS,Y,N,N,N,N,Y)
 PRPS = 143
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(TEM1,N,N,Y,N,Y,N)
 TERMS(LTLS,N,N,Y,N,Y,Y)
 TERMS(T3,N,N,Y,N,Y,N)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =1. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(TEM1)=1.0E+10 ;PRNDTL(LTLS)=1.
 PRNDTL(T3)=1.
 PRT(TEM1)=1. ;PRT(LTLS)=1.
 PRT(T3)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(#AN3)=1.0E-10 ;FIINIT(#AN1)=1.0E-10
 FIINIT(#AP3)=1.0E-10 ;FIINIT(#AP1)=1.0E-10
 FIINIT(#RS3)=1.0E-10 ;FIINIT(#RS1)=1.0E-10
 FIINIT(#3-1)=1.0E-10 ;FIINIT(QRY)=1.0E-10
 FIINIT(PRPS)=0. ;FIINIT(TEM1)=600.
 FIINIT(LTLS)=1.0E-10 ;FIINIT(WDIS)=0.1
 FIINIT(WGAP)=1.0E-10 ;FIINIT(T3)=600.
 FIINIT(SCAT)=0. ;FIINIT(EMIS)=1.
 
 PATCH(SOL1 ,INIVAL, 1, 1, 1, 5, 1, 1, 1, 1)
 INIT(SOL1 ,PRPS,0. ,111. )
 
 PATCH(SOL2 ,INIVAL, 1, 1, 16, 20, 1, 1, 1, 1)
 INIT(SOL2 ,PRPS,0. ,112. )
 
 PATCH(HOTINI ,INIVAL, 1, 1, 1, 5, 1, 1, 1, 1)
 INIT(HOTINI ,EMIS,0. ,0.3 )
 
 PATCH(COLDINI ,INIVAL, 1, 1, 16, 20, 1, 1, 1, 1)
 INIT(COLDINI ,EMIS,0. ,0.1 )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(HOT ,CELL , 1, 1, 1, 1, 1, 1, 1, 1)
 COVAL(HOT ,TEM1,1.0E+05 ,800. )
 
 PATCH(COLD ,CELL , 1, 1, 20, 20, 1, 1, 1, 1)
 COVAL(COLD ,TEM1,1.0E+05 ,400. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 500 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = F
 RESREF(TEM1)=1.0E-08 ;RESREF(LTLS)=1.0E-08
 RESREF(T3)=1.0E-03
 ************************************************************
  Group 16. Terminate Iterations
 LITER(TEM1)=20 ;LITER(LTLS)=20
 LITER(T3)=20
 ENDIT(TEM1)=1.0E-03 ;ENDIT(LTLS)=1.0E-03
 ENDIT(T3)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(#AN3,LINRLX,1.)
 RELAX(#AN1,LINRLX,1.)
 RELAX(#AP3,LINRLX,1.)
 RELAX(#AP1,LINRLX,1.)
 RELAX(#RS3,LINRLX,1.)
 RELAX(#RS1,LINRLX,1.)
 RELAX(#3-1,LINRLX,1.)
 RELAX(QRY,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 RELAX(TEM1,FALSDT,1.0E+09)
 RELAX(LTLS,FALSDT,1.0E+09)
 RELAX(WDIS,LINRLX,1.)
 RELAX(WGAP,LINRLX,1.)
 RELAX(T3,LINRLX,0.5)
 RELAX(SCAT,LINRLX,1.)
 RELAX(EMIS,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(#AN3)=1.0E+10 ;VARMIN(#AN3)=-1.0E+10
 VARMAX(#AN1)=1.0E+10 ;VARMIN(#AN1)=-1.0E+10
 VARMAX(#AP3)=1.0E+10 ;VARMIN(#AP3)=-1.0E+10
 VARMAX(#AP1)=1.0E+10 ;VARMIN(#AP1)=-1.0E+10
 VARMAX(#RS3)=1.0E+10 ;VARMIN(#RS3)=-1.0E+10
 VARMAX(#RS1)=1.0E+10 ;VARMIN(#RS1)=-1.0E+10
 VARMAX(#3-1)=1.0E+10 ;VARMIN(#3-1)=-1.0E+10
 VARMAX(QRY)=1.0E+10 ;VARMIN(QRY)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(TEM1)=800. ;VARMIN(TEM1)=400.
 VARMAX(LTLS)=1.0E+10 ;VARMIN(LTLS)=-1.0E+10
 VARMAX(WDIS)=1.0E+10 ;VARMIN(WDIS)=-1.0E+10
 VARMAX(WGAP)=1.0E+10 ;VARMIN(WGAP)=-1.0E+10
 VARMAX(T3)=800. ;VARMIN(T3)=400.
 VARMAX(SCAT)=1.0E+10 ;VARMIN(SCAT)=-1.0E+10
 VARMAX(EMIS)=1.0E+10 ;VARMIN(EMIS)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,STORED,#3-1,C,=T3-TEM1!ZSLFIN)
 SPEDAT(SET,STORED,#RS1,C,=RESI(TEM1)!RESIDU)
 SPEDAT(SET,STORED,#RS3,C,=RESI(T3)!RESIDU)
 SPEDAT(SET,STORED,#AP1,C,=APCO(TEM1)!EQCOEF)
 SPEDAT(SET,STORED,#AP3,C,=APCO(T3)!EQCOEF)
 SPEDAT(SET,STORED,#AN1,C,=ANCO(TEM1)!EQCOEF)
 SPEDAT(SET,STORED,#AN3,C,=ANCO(T3)!EQCOEF)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,MATERIAL,0,L,T)
 SPEDAT(SET,MATERIAL,111,L,T)
 SPEDAT(SET,MATERIAL,112,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(#AN3,Y,N,Y,N,N,N)
 OUTPUT(#AN1,Y,N,Y,N,N,N)
 OUTPUT(#AP3,Y,N,Y,N,N,N)
 OUTPUT(#AP1,Y,N,Y,N,N,N)
 OUTPUT(#RS3,Y,N,Y,N,N,N)
 OUTPUT(#RS1,Y,N,Y,N,N,N)
 OUTPUT(#3-1,Y,N,Y,N,N,N)
 OUTPUT(QRY,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
 OUTPUT(LTLS,N,N,N,N,N,N)
 OUTPUT(WDIS,N,N,N,N,N,N)
 OUTPUT(WGAP,Y,N,Y,N,N,N)
 OUTPUT(T3,Y,N,Y,Y,Y,Y)
 OUTPUT(SCAT,Y,N,Y,N,N,N)
 OUTPUT(EMIS,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 11 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = 1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(PROFILES,PROFIL, 1, 1, 1, 20, 1, 1, 1, 1)
 PLOT(PROFILES,QRY ,0. ,0. )
 PLOT(PROFILES,T3 ,0. ,0. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP