talk=t;run(1,1)
PHOTON USE
AUTOPLOT
upause 1
file; phi 5
cl; da 1; yco2; da 1; yo2; da 1; yco; scale; cola 1; col3 2
colf 3
msg mass fractions of CO2 - yellow, O2 - blue, CO - red ....more
pause; cl; da 1; yh2o; da 1; mixf; scale; col3 1; colf 2
msg mass fractions of H2O - blue, coal-derived gas - red ....more
pause; cl; da 1; tmp1; da 1; tmp2; scale; colf 1; cola 2
msg temp of gas - red, of coal - yellow. ....more
pause; cl; da 1; gvel z 1 19; da 1; cvel z 1 19; col3 1; col8 2
msg gas velocity - blue, coal velocity - green.
pause; end
enduse
DISPLAY
Coal-fines combustion model; two-phase with slip, 1D,
one space, interphase heat
and mass transfer.
Reactions: C (s) + 0.5 O2 > CO (exothermic )
CO + 0.5 O2 > CO2 (exothermic )
C(s) + CO2 > 2CO (endothermic)
C(s) + H2O > CO + H2 (endothermic)
H2 + 0.5 O2 > H2O (exothermic )
ENDDIS
Fuel composition and consequences for stoichiometry
** CINCL & HINCL are the mass fractions of carbon & hydrogen
in the coal
REAL(CINCL, HINCL, NINCL)
CINCL=1.0; HINCL=0.1;NINCL=1.-CINCL-HINCL
In the following formulae:
0.232 is the mass of oxygen per unit mass of air
0.768 is the mass of nitrogen per unit mass of air
2.0, 12.0, 16.0, 18.0, 32.0 & 44.0 are molecular weights of
H2, C, O, H2O, O2 & CO2 respectively
REAL(FS)
** FS is the mass of fuel per unit mass of air/fuel mixture
to convert all carbon and oxygen to carbon monoxide.
FS=0.232/(0.232 + CINCL*16.0/12.0)
REAL(HCCO2,HCCO,HHH2O,HCHX,HCOCO2)
HCCO2=32.792E6; HCCO=9.208E6; HHH2O=120.9E6
HCOCO2=(12.0/28.0)*(HCCO2-HCCO)
HCHX=CINCL*HCCO2 + HINCL*HHH2O
REAL(HGIN,GALF,HF,HA2,HO,HSIN)
** take cpsolid=cpgas=1.1e3
REAL(RHOGIN); CP1=1.1E3; CP2=CP1
Data concerning the inflows of fuel and air
REAL(FLOG,FLOS,VELO,VELG,CHATIM,LENGTH,RGIN,RSIN)
REAL(TGIN,TSIN,BURNRATE)
TGIN=500.; TSIN=350.; FLOS=1.0; VELO=1.;LENGTH=10.0
BURNRATE=10000.
HGIN=CP1*TGIN
HSIN=CP2*TSIN + HCHX
FLOG=2.25*FLOS
TEXT(1D Fine coal-particle combustion
TITLE
NZ=20; GRDPWR(Z,NZ,LENGTH,1.)
ONEPHS=F
GROUP 7. Variables stored, solved & named
SOLUTN(1,Y,Y,Y,P,P,P); OUTPUT(1,Y,Y,Y,Y,Y,Y)
BOOLEAN(NXNYNZ1);NXNYNZ1=T
IF(.NOT.ONEPHS) THEN
SOLUTN(9,Y,Y,n,P,P,P); OUTPUT(9,Y,Y,Y,Y,Y,Y)
SOLUTN(10,Y,Y,N,P,P,P); OUTPUT(10,Y,Y,Y,Y,Y,Y)
ENDIF
IF(NX.GT.1) THEN
NXNYNZ1=F
SOLUTN(3,Y,Y,N,P,P,P); OUTPUT(3,Y,Y,Y,Y,Y,Y)
IF(.NOT.ONEPHS) THEN
+ SOLUTN(4,Y,Y,N,P,P,P); OUTPUT(4,Y,Y,Y,Y,Y,Y)
ENDIF
ENDIF
IF(NY.GT.1) THEN
NXNYNZ1=F
SOLUTN(5,Y,Y,N,P,P,P); OUTPUT(5,Y,Y,Y,Y,Y,Y)
IF(.NOT.ONEPHS) THEN
+ SOLUTN(6,Y,Y,N,P,P,P); OUTPUT(6,Y,Y,Y,Y,Y,Y)
ENDIF
ENDIF
IF(NZ.GT.1) THEN
NXNYNZ1=F
+ SOLUTN(7,Y,Y,N,P,P,P); OUTPUT(7,Y,Y,Y,Y,Y,Y)
IF(.NOT.ONEPHS) THEN
+ SOLUTN(8,Y,Y,N,P,P,P); OUTPUT(8,Y,Y,Y,Y,Y,Y)
ENDIF
ENDIF
IF(NXNYNZ1) THEN
mesg(nx=ny=nz=1, so no velocities stored.
ENDIF
NAME(7)=GVEL; NAME(8)=CVEL
GROUP 7. Variables stored, solved & named
SOLUTN(11,Y,Y,N,P,P,P)
NAME(9)=GAS; NAME(R2)=FUEL; NAME(11)=SHAD
** provide storage for inter-phase mass transfer
STORE(MDOT,CFIP)
** Solve additionally for the mixture fraction, i.e. the quantity
of phase-2 material which has entered phase 1.
SOLUTN(C1,Y,Y,Y,P,P,P); NAME(C1)=MIXF
STORE(YCO,YO2,YCO2,YN2,YH2,YH2O,RHO1,RHO2)
SOLUTN(H1,Y,Y,N,P,P,P); SOLUTN(H2,Y,Y,N,P,P,P)
STORE(TMP1,TMP2)
GROUP 8. Terms (in differential equations) & devices
TERMS(H1,N,P,P,P,Y,Y); TERMS(H2,N,P,P,P,N,Y)
GROUP 9. Properties of the medium (or media)
RHO1= 1.2
RHO2=1.E3 ; PRESS0=1.E5
GROUP 10. Inter-phase-transfer processes and properties
** Set constant interphase friction factor and activate
the calculation of the interphase mass transfer by:
CFIPS=GRND1; CFIPC=1.E5
GROUP 11. Initialization of variable or porosity fields
RSIN=FLOS/(RHO2*VELO); RHOGIN=PRESS0/(287.41*TGIN)
RGIN=1.-RSIN; VELG=FLOG/(RHOGIN*RGIN)
FIINIT(GAS)=RGIN; FIINIT(FUEL)=RSIN; FIINIT(SHAD)=RSIN
FIINIT(GVEL)=VELG; FIINIT(CVEL)=VELO; FIINIT(MDOT)=0.01*FLOS
FIINIT(RHO1)=RHOGIN; FIINIT(C4)=0.0; FIINIT(C6)=0.0
FIINIT(H1)=HGIN; FIINIT(H2)=HSIN; FIINIT(MIXF)=0.
FIINIT(TMP1)=TGIN;FIINIT(TMP2)=TSIN
GROUP 13. Boundary conditions and special sources
REAL(OUTCO1); OUTCO1=1.E3
REAL(MULT);MULT=2.0
PATCH(INLETS,LOW,1,1,1,1,1,1,1,1); PATCH(INLETG,LOW,1,1,1,1,1,1,1,1)
PATCH(OUTLET,CELL,1,1,1,1,NZ,NZ,1,1)
COVAL(INLETS,CVEL,ONLYMS,VELO); COVAL(INLETS,H2,ONLYMS,HSIN)
COVAL(INLETS,P2,FIXFLU,FLOS) ; COVAL(INLETG,P1,FIXFLU,FLOG)
gas phase
COVAL(INLETG,GVEL,ONLYMS,VELG); COVAL(INLETG,MIXF,ONLYMS,0.)
COVAL(INLETG,H1,ONLYMS,HGIN)
** multiply OUTCO1 by estimated value of exit density
COVAL(OUTLET,P1,OUTCO1*0.1,0.0); COVAL(OUTLET,P2,OUTCO1*RHO2,0.0)
GROUP 15. Termination of sweeps
LSWEEP=2000; SELREF=T; RESFAC=0.001
GROUP 17. Under-relaxation devices
CHATIM=MULT*LENGTH/(VELG*NX*NY*NZ)
RELAX(P1,LINRLX,0.3); RELAX(SHAD,LINRLX,0.3)
RELAX(FUEL,LINRLX,0.3); RELAX(GAS,LINRLX,0.3)
RELAX(GVEL,FALSDT,0.001); RELAX(CVEL,FALSDT,0.001)
RELAX(MIXF,FALSDT,0.01)
RELAX(H1,FALSDT,0.1); RELAX(H2,FALSDT,0.1)
RELAX(RHO1,LINRLX,0.5)
GROUP 18. Limits on variables or increments to them
VARMIN(MIXF)=0.; VARMAX(MIXF)=FS
VARMIN(YO2) =0.; VARMAX(YO2) =1.0
VARMIN(YCO) =0.; VARMAX(YCO) =1.0
VARMIN(YCO2)=0.; VARMAX(YCO2)=1.0
VARMIN(YH2O)=0.; VARMAX(YH2O)=1.0
VARMIN(YH2) =0.; VARMAX(YH2) =1.0
VARMIN(YN2) =0.; VARMAX(YN2) =1.0
VARMIN(FUEL)=1.E-9
GROUP 21. Print-out of variables
OUTPUT(SHAD,Y,Y,Y,Y,Y,Y); OUTPUT(GAS ,Y,Y,Y,Y,Y,Y)
OUTPUT(MIXF,Y,Y,Y,Y,Y,Y); OUTPUT(FUEL,Y,Y,Y,Y,Y,Y)
OUTPUT(H1 ,Y,Y,Y,Y,Y,Y); OUTPUT(H2 ,Y,Y,Y,Y,Y,Y)
GROUP 22. Spot-value print-out
IYMON=NY-2
TSTSWP=-1
GROUP 23. Field print-out and plot control
ITABL=1; ORSIZ=0.2; Nplt=1
PATCH(PROFIL1,PROFIL,1,NX,1,NY,1,NZ,1,1)
COVAL(PROFIL1,YCO,0,0)
COVAL(PROFIL1,YCO2,0,0)
COVAL(PROFIL1,MIXF,0,0)
COVAL(PROFIL1,FUEL,0,0)
PATCH(PROFIL2,PROFIL,1,NX,1,1,NY,NZ,1,1)
COVAL(PROFIL2,P1,0,0)
COVAL(PROFIL2,GVEL,0,0)
COVAL(PROFIL2,5,0,0)
COVAL(PROFIL2,RHO1,0,0)
PATCH(PROFIL3,PROFIL,1,NX,1,NY,1,NZ,1,1)
COVAL(PROFIL3,TMP1,0,0)
COVAL(PROFIL3,TMP2,0,0)
========================================================
6 gases model
========================================================
namsat=mosg
REAL(AIRO2,AIRN2,GASCON)
REAL(MN2,MC,MO2,MH2,MCO,MCO2,MH2O)
STORE(RMIX,HSUB,YN2,YH2,YO2,YCO,YCO2,YH2O,YSUM)
STORE(RHO1,RHO2,FLIM,FRAC,GO,GC,GH,GOFU,GOPA)
Gas constant:
GASCON=8.3143e3
AIRO2=0.232;AIRN2=0.768
Molecular masses:
MN2=28.; MC=12.; MO2=32.; MH2=2.; MCO=28.; MCO2=44.; MH2O=18.
RHO1=GRND
DEN1=PRESS0/(RMIX*TMP1+tiny)
DEN1=AMIN1(VARMAX(142),AMAX1(0.0,DEN1,VARMIN(142)))
CMDOT=GRND
INTMDT=RCAR*VOL
CINT(H1)=GRND
COI1(H1)=0.0
CINT(H2)=GRND
COI2(H2)=RCAR*VOL
PHINT(H1)=GRND
FII1(H1)=:CP2:*TMP2+:HCHX:
PHINT(H2)=GRND
FII2(H2)=:CP2:*TMP1+:HCHX:
Model settings
==============
Sub-model 1: Coal carbon oxidation
-----------------------------------
(1) Gas mixture composition parameters
FLIM=0.232/(0.232+:CINCL:*32./12.+$
:HINCL:*32./(2.*2.))
GO=:AIRO2:*(1-MIXF)
GC=:CINCL:*MIXF
GH=:HINCL:*MIXF
GOPA=GC*32./(2.*12.)/(1-GO+GC*32./(2*12.)+TINY)
GOFU=(GH*32./(2.*2.)+GC*32./12.)/$
(1.-GO+GH*32./(2.*2.)+GC*32./12.+TINY)
FRAC=(GO-GOPA)/(GOFU-GOPA+TINY)
(2) Mass fraction of nytrogen
YN2=:NINCL:*MIXF+:AIRN2:*(1.-MIXF)
(3) ** Region 1** containing O2, CO2 & H2O
YH2O=:HINCL:*MIXF*18./2.
IF(MIXF.LE.FLIM)
YCO2=:CINCL:*MIXF*44./12.
IF(MIXF.LE.FLIM)
YO2 =:AIRO2:*(1.-MIXF)-:CINCL:*MIXF*32./12.-$
:HINCL:*MIXF*32./(2.*2.)
IF(MIXF.LE.FLIM)
YCO=0.0
IF(MIXF.LE.FLIM)
YH2=0.0
IF(MIXF.LE.FLIM)
(4) ** Region 2 ** containing CO2, H2O, H2 & CO
YH2O=:HINCL:*MIXF*18./2.*FRAC*(1-GOFU)/(1-GO+TINY)
IF(MIXF.GT.FLIM.AND.FRAC.GE.0.)
YCO2=:CINCL:*MIXF*44./12.*FRAC*(1-GOFU)/(1-GO+TINY)
IF(MIXF.GT.FLIM.AND.FRAC.GE.0.)
YO2=0.0
IF(MIXF.GT.FLIM.AND.FRAC.GE.0.)
YCO=:CINCL:*MIXF*28./12.*(1-FRAC)*$
(1-GOPA)/(1-GO+TINY)
IF(MIXF.GT.FLIM.AND.FRAC.GE.0.)
YH2=:HINCL:*MIXF*(1-FRAC)*(1-GOPA)/(1-GO+TINY)
IF(MIXF.GT.FLIM.AND.FRAC.GE.0.)
(5) ** Region 3 ** containing H2 & CO.
YH2O=0.0
IF(MIXF.GT.FLIM.AND.FRAC.LT.0.)
YCO2=0.0
IF(MIXF.GT.FLIM.AND.FRAC.LT.0.)
YO2=0.0
IF(MIXF.GT.FLIM.AND.FRAC.LT.0.)
YCO=:AIRO2:*(1-MIXF)*2*28./32.
IF(MIXF.GT.FLIM.AND.FRAC.LT.0.)
YH2=:HINCL:*MIXF
IF(MIXF.GT.FLIM.AND.FRAC.LT.0.)
*************************************
YH2=AMAX1(0.,YH2)
YH2O=AMAX1(0.,YH2O)
YCO=AMAX1(0.,YCO)
YCO2=AMAX1(0.,YCO2)
YN2=AMAX1(0.,YN2)
YO2=AMAX1(0.,YO2)
HSUB=0.0
IF(MIXF.LE.FLIM)
RMIX=:GASCON:*(YO2/32.+YH2O/18.+YCO2/44.+$
YN2/28.)
IF(MIXF.LE.FLIM)
HSUB=YCO*:HCOCO2:+YH2*:HHH2O:
IF(MIXF.GT.FLIM.AND.FRAC.GE.0.)
RMIX=:GASCON:*(YH2O/18.+YCO/28.+YCO2/44.+$
YH2/2.+YN2/28.)
IF(MIXF.GT.FLIM.AND.FRAC.GE.0.)
HSUB=YCO*:HCOCO2:+YH2*:HHH2O:
IF(MIXF.GT.FLIM.AND.FRAC.LT.0.)
RMIX=:GASCON:*(YCO/28.+YH2/2.+YN2/28.)
IF(MIXF.GT.FLIM.AND.FRAC.LT.0.)
TMP1=(H1-HSUB)/1100.
TMP2=(H2-:HCHX:)/1100.
TMP1=AMIN1(VARMAX(140),AMAX1(100.,TMP1,VARMIN(140)))
TMP2=AMIN1(VARMAX(139),AMAX1(100.,TMP2,VARMIN(139)))
YSUM=YN2+YO2+YCO+YCO2+YH2O+YH2
Interphase transport.
--------------------
STORE(RCAR)
Carbon mass transfer and related sources.
-----------------------------------------
PATCH(car2gas,VOLUME,1,NX,1,NY,1,NZ,1,1)
(1) Transfer of mass leading to increase of gas flow rate:
VAL = RCAR
COVAL(car2gas,P1,FIXFLU,GRND)
(2) Transfer of carbon leading to increase of mixture
fraction at the same rate:
CO = RCAR
COVAL(car2gas,MIXF,GRND,1.)
(3) Transfer of enthalpy and heat leading to increase of
gas enthalpy at the same rate:
VAL=:CP2:*TMP2 + :HCHX:
COVAL(car2gas,H1,ONLYMS,GRND)
* Carbon from coal patch
PATCH(carFcoal,VOLUME,1,NX,1,NY,1,NZ,1,1)
1. Sink of second phase mass
VAL= -RCAR
COVAL(carFcoal,P2,FIXFLU,GRND)
2. Heat From coal patch
PATCH(heatFcol,VOLUME,1,NX,1,NY,1,NZ,1,1)
CO = RCAR
VAL= TMP1*:CP2: + :HCHX:
COVAL(heatFcol,H2,GRND,GRND)
RCAR=:BURNRATE:*FUEL*(:FS:-MIXF)
nyprin=1;nzprin=1
dmpstk=t
LIBREF=101
STOP