TALK=T;RUN(1,1)
  PHOTON USE
  p;;;;

  con c1 z 1 fi;0.02
  msg contours of reactedness; x=distorted distance; y=multiplier-1
  pause;con c2 z 1 fi;0.02
  msg contours of reaction rate; x=distorted dist.; y=multiplier-1
  ENDUSE
  DISPLAY

  This case illustrates the use of PLANT for creating a source which
  is dependent on both the dependent variable (C1) and the
  independent variable (X), which is a requirement for the method of
  simulation of laminar flame propagation which employs
      x = exp(-const * distance)      as the independent variable.

  It also illustrates the use of the y dimension as a parametric
  multiplier, thus allowing the multiplying constant of the reaction
  rate to have ten (ie NY) values in a single run.

  This device is often useful when parametric studies have to be
  made; for it also permits PHOTON to be used for display purposes.

  A PHOTON USE file is supplied in this Q1.
  ENDDIS
    PLANTBEGIN
PATCH(REACRATE,VOLUME,1,NX,1,NY,1,1,1,1)
   CO= :RCONST:*C1**:EXPO:*XG2D**(-2)*(1.0+YG2D)
   VAL=1.0
COVAL(REACRATE,C1,GRND,GRND)
   VAL= :RCONST:*C1**:EXPO:*(1.0+YG2D)*(1-C1)
COVAL(REACRATE,C2,FIXVAL,GRND)
    PLANTEND
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Steady lam. fl. prop.; const=(1+y)*0.2  )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 251
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 100
 XULAST =1.
 XFRAC(1)=1.0E-02 ;XFRAC(2)=0.02
 XFRAC(3)=0.03 ;XFRAC(4)=0.04
 XFRAC(5)=0.05 ;XFRAC(6)=0.06
 XFRAC(7)=0.07 ;XFRAC(8)=0.08
 XFRAC(9)=0.09 ;XFRAC(10)=0.1
 XFRAC(11)=0.11 ;XFRAC(12)=0.12
 XFRAC(13)=0.13 ;XFRAC(14)=0.14
 XFRAC(15)=0.15 ;XFRAC(16)=0.16
 XFRAC(17)=0.17 ;XFRAC(18)=0.18
 XFRAC(19)=0.19 ;XFRAC(20)=0.2
 XFRAC(21)=0.21 ;XFRAC(22)=0.22
 XFRAC(23)=0.23 ;XFRAC(24)=0.24
 XFRAC(25)=0.25 ;XFRAC(26)=0.26
 XFRAC(27)=0.27 ;XFRAC(28)=0.28
 XFRAC(29)=0.29 ;XFRAC(30)=0.3
 XFRAC(31)=0.31 ;XFRAC(32)=0.32
 XFRAC(33)=0.33 ;XFRAC(34)=0.34
 XFRAC(35)=0.35 ;XFRAC(36)=0.36
 XFRAC(37)=0.37 ;XFRAC(38)=0.38
 XFRAC(39)=0.39 ;XFRAC(40)=0.4
 XFRAC(41)=0.41 ;XFRAC(42)=0.42
 XFRAC(43)=0.43 ;XFRAC(44)=0.44
 XFRAC(45)=0.45 ;XFRAC(46)=0.46
 XFRAC(47)=0.47 ;XFRAC(48)=0.48
 XFRAC(49)=0.49 ;XFRAC(50)=0.5
 XFRAC(51)=0.51 ;XFRAC(52)=0.52
 XFRAC(53)=0.53 ;XFRAC(54)=0.54
 XFRAC(55)=0.55 ;XFRAC(56)=0.56
 XFRAC(57)=0.57 ;XFRAC(58)=0.58
 XFRAC(59)=0.59 ;XFRAC(60)=0.6
 XFRAC(61)=0.61 ;XFRAC(62)=0.62
 XFRAC(63)=0.63 ;XFRAC(64)=0.64
 XFRAC(65)=0.65 ;XFRAC(66)=0.66
 XFRAC(67)=0.67 ;XFRAC(68)=0.68
 XFRAC(69)=0.69 ;XFRAC(70)=0.7
 XFRAC(71)=0.71 ;XFRAC(72)=0.72
 XFRAC(73)=0.73 ;XFRAC(74)=0.74
 XFRAC(75)=0.75 ;XFRAC(76)=0.76
 XFRAC(77)=0.77 ;XFRAC(78)=0.78
 XFRAC(79)=0.79 ;XFRAC(80)=0.8
 XFRAC(81)=0.81 ;XFRAC(82)=0.82
 XFRAC(83)=0.83 ;XFRAC(84)=0.84
 XFRAC(85)=0.85 ;XFRAC(86)=0.86
 XFRAC(87)=0.87 ;XFRAC(88)=0.88
 XFRAC(89)=0.89 ;XFRAC(90)=0.9
 XFRAC(91)=0.91 ;XFRAC(92)=0.92
 XFRAC(93)=0.93 ;XFRAC(94)=0.94
 XFRAC(95)=0.95 ;XFRAC(96)=0.96
 XFRAC(97)=0.97 ;XFRAC(98)=0.98
 XFRAC(99)=0.99 ;XFRAC(100)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 50
 YVLAST =1.
 YFRAC(1)=0.02 ;YFRAC(2)=0.04
 YFRAC(3)=0.06 ;YFRAC(4)=0.08
 YFRAC(5)=0.1 ;YFRAC(6)=0.12
 YFRAC(7)=0.14 ;YFRAC(8)=0.16
 YFRAC(9)=0.18 ;YFRAC(10)=0.2
 YFRAC(11)=0.22 ;YFRAC(12)=0.24
 YFRAC(13)=0.26 ;YFRAC(14)=0.28
 YFRAC(15)=0.3 ;YFRAC(16)=0.32
 YFRAC(17)=0.34 ;YFRAC(18)=0.36
 YFRAC(19)=0.38 ;YFRAC(20)=0.4
 YFRAC(21)=0.42 ;YFRAC(22)=0.44
 YFRAC(23)=0.46 ;YFRAC(24)=0.48
 YFRAC(25)=0.5 ;YFRAC(26)=0.52
 YFRAC(27)=0.54 ;YFRAC(28)=0.56
 YFRAC(29)=0.58 ;YFRAC(30)=0.6
 YFRAC(31)=0.62 ;YFRAC(32)=0.64
 YFRAC(33)=0.66 ;YFRAC(34)=0.68
 YFRAC(35)=0.7 ;YFRAC(36)=0.72
 YFRAC(37)=0.74 ;YFRAC(38)=0.76
 YFRAC(39)=0.78 ;YFRAC(40)=0.8
 YFRAC(41)=0.82 ;YFRAC(42)=0.84
 YFRAC(43)=0.86 ;YFRAC(44)=0.88
 YFRAC(45)=0.9 ;YFRAC(46)=0.92
 YFRAC(47)=0.94 ;YFRAC(48)=0.96
 YFRAC(49)=0.98 ;YFRAC(50)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(16)=C1 ;NAME(17)=C2
 NAME(150)=NPOR
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(C1,Y,Y,N,N,N,Y)
 SOLUTN(C2,Y,Y,N,N,N,Y)
 SOLUTN(NPOR,Y,N,N,N,N,Y)
 EPOR = 0 ;HPOR = 0 ;NPOR = 150 ;VPOR = 0
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(C1,N,N,Y,Y,Y,Y)
 TERMS(C2,N,N,N,N,N,N)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1. ;ENUT =0.
 PRNDTL(C1)=1.
 PRT(C1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(C1)=0.5 ;FIINIT(C2)=1.0E-10
 FIINIT(NPOR)=0.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(MINUSINF,WEST , 1, 1, 1, 50, 1, 1, 1, 1)
 COVAL(MINUSINF,C1 , FIXVAL ,0. )
 
 PATCH(DOWNSTRM,EAST , 100, 100, 1, 50, 1, 1, 1, 1)
 COVAL(DOWNSTRM,C1 ,1.0E+05 ,1. )
 
 PATCH(REACRATE,VOLUME, 1, 100, 1, 50, 1, 1, 1, 1)
 COVAL(REACRATE,C1 , GRND , GRND )
 COVAL(REACRATE,C2 , FIXVAL , GRND )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 400 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(C1)=20 ;LITER(C2)=20
 ENDIT(C1)=1.0E-03 ;ENDIT(C2)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(C1,FALSDT,1.0E+09)
 RELAX(C2,FALSDT,1.0E+09)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(C1)=1.0E+10 ;VARMIN(C1)=-1.0E+10
 VARMAX(C2)=1.0E+10 ;VARMIN(C2)=-1.0E+10
 VARMAX(NPOR)=1.0E+10 ;VARMIN(NPOR)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 NAMSAT =MOSG
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(C1)=0.6872 ;EX(C2)=0.2961
 EX(NPOR)=1.0E-11
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(C1,Y,N,Y,Y,Y,Y)
 OUTPUT(C2,Y,N,Y,Y,Y,Y)
 OUTPUT(NPOR,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 50 ;IYMON = 25 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(PROFILE ,PROFIL, 1, 100, 1, 1, 1, 1, 1, 1)
 PLOT(PROFILE ,C1 ,0. ,0. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP