TALK=T;RUN(1,1)
  PHOTON USE
  P



  gr ou x 1
  set vec ref 1.
  vec x 1 sh
  msg(             Water velocity distribution
  msg( Press ENTER to continue
  pause;
  vec off;red
  set vec comp - v2 w2
  vec x 1 sh
  msg(             Air velocity distribution
  msg( Press ENTER to continue
  pause;
  vec off;red
  con r2 x 1 1 z 1 19 fil;.0001
  msg(             Air volume fraction contours
  msg( Press E to finish
  ENDUSE
  DISPLAY
   This problem  is  concerned with the prediction of lateral phase
   distribution for a bubbly flow in a duct. The phase distribution
   is  caused  by  the interaction of gravity and lift forces.  The
   latters  are  introduced  by  PLANT  options.  The   interesting
   variants  include  the changing in gravity directions to see how
   the bubbles accumulate near the walls for the upflow  situation,
   while  they  accumulate near the center of the duct for the down
   flow case.  Note that some uderrelaxation adjustments  could  be
   used to accelerate the convergence.
  ENDDIS
    PLANTBEGIN
  ** Lift force
PATCH(LIFT,VOLUME,1,NX,1,NY,1,NZ,1,LSTEP)
   VAL=RG(1)*R2*(W2-W1)*(NORTH(W1)-W1)/DYG2D
COVAL(LIFT,V1,FIXFLU,GRND)
   VAL=RG(1)*R2*(W1-W2)*(NORTH(W1)-W1)/DYG2D
COVAL(LIFT,V2,FIXFLU,GRND)
    PLANTEND
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(PHASE DISTRIBUTION IN A DUCT:143        )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 143
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 10
 YVLAST =0.025
 YFRAC(1)=0.1 ;YFRAC(2)=0.2
 YFRAC(3)=0.3 ;YFRAC(4)=0.4
 YFRAC(5)=0.5 ;YFRAC(6)=0.6
 YFRAC(7)=0.7 ;YFRAC(8)=0.8
 YFRAC(9)=0.9 ;YFRAC(10)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 20
 ZWLAST =0.25
 ZFRAC(1)=0.05 ;ZFRAC(2)=0.1
 ZFRAC(3)=0.15 ;ZFRAC(4)=0.2
 ZFRAC(5)=0.25 ;ZFRAC(6)=0.3
 ZFRAC(7)=0.35 ;ZFRAC(8)=0.4
 ZFRAC(9)=0.45 ;ZFRAC(10)=0.5
 ZFRAC(11)=0.55 ;ZFRAC(12)=0.6
 ZFRAC(13)=0.65 ;ZFRAC(14)=0.7
 ZFRAC(15)=0.75 ;ZFRAC(16)=0.8
 ZFRAC(17)=0.85 ;ZFRAC(18)=0.9
 ZFRAC(19)=0.95 ;ZFRAC(20)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = F
 EQUVEL = F
 NAME(1)=P1 ;NAME(5)=V1
 NAME(6)=V2 ;NAME(7)=W1
 NAME(8)=W2 ;NAME(9)=R1
 NAME(10)=R2
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(V2,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(W2,Y,Y,N,N,N,Y)
 SOLUTN(R1,Y,Y,N,N,N,Y)
 SOLUTN(R2,Y,Y,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,N,Y,Y)
 TERMS(V2,Y,Y,N,N,N,Y)
 TERMS(W1,Y,Y,Y,N,Y,Y)
 TERMS(W2,Y,Y,N,N,N,Y)
 TERMS(R1,Y,Y,Y,Y,Y,Y)
 TERMS(R2,Y,Y,Y,Y,N,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 EQDVDP = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1000. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 RHO2 =1. ;TMP2 =0. ;EL2 =0.
 DVO2DT =0. ;DRH2DP =0.
 ENUL =1.0E-04 ;ENUT =0.
 PHINT(V1)=-2.022E+04 ;PHINT(V2)=-2.022E+04
 PHINT(W1)=-2.022E+04 ;PHINT(W2)=-2.022E+04
 PHINT(R1)=-2.022E+04 ;PHINT(R2)=-2.022E+04
 PRNDTL(V1)=1. ;PRNDTL(W1)=1.
 PRNDTL(R1)=1. ;PRNDTL(R2)=1.
 PRT(V1)=1. ;PRT(W1)=1.
 PRT(R1)=1. ;PRT(R2)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 CFIPS =100.
 RLOLIM =0. ;CMDOT =0.
 CINT(P1)=1. ;CINT(V1)=1.
 CINT(V2)=1. ;CINT(W1)=1.
 CINT(W2)=1. ;CINT(R1)=1.
 CINT(R2)=1.
 PHINT(P1)=-2.022E+04 ;PHINT(V1)=-2.022E+04
 PHINT(V2)=-2.022E+04 ;PHINT(W1)=-2.022E+04
 PHINT(W2)=-2.022E+04 ;PHINT(R1)=-2.022E+04
 PHINT(R2)=-2.022E+04
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(V2)=1.0E-10 ;FIINIT(W1)=0.5
 FIINIT(W2)=0.5 ;FIINIT(R1)=0.9
 FIINIT(R2)=0.1
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(INLET ,LOW , 1, 1, 1, 10, 1, 1, 1, 1)
 COVAL(INLET ,W1 ,0. ,0.5 )
 COVAL(INLET ,W2 ,0. ,0.5 )
 COVAL(INLET ,R1 , FIXFLU ,450. )
 COVAL(INLET ,R2 , FIXFLU ,0.05 )
 
 PATCH(WALL ,NWALL , 1, 1, 10, 10, 1, 20, 1, 1)
 COVAL(WALL ,W1 ,1. ,0. )
 
 PATCH(EXIT ,HIGH , 1, 1, 1, 10, 20, 20, 1, 1)
 COVAL(EXIT ,R1 ,1000. ,0. )
 COVAL(EXIT ,R2 ,1. ,0. )
 
 PATCH(GRAVITY ,PHASEM, 1, 1, 1, 10, 1, 20, 1, 1)
 COVAL(GRAVITY ,W1 , FIXFLU ,-9.81 )
 COVAL(GRAVITY ,W2 , FIXFLU ,-9.81 )
 
 PATCH(LIFT ,VOLUME, 1, 1, 1, 10, 1, 20, 1, 1)
 COVAL(LIFT ,V1 , FIXFLU , GRND )
 COVAL(LIFT ,V2 , FIXFLU , GRND )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 200 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 ISWR1 = 1 ;ISWR2 = 10000
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(V2)=10 ;LITER(W1)=10
 LITER(W2)=10 ;LITER(R1)=1
 LITER(R2)=1
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(V2)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ENDIT(W2)=1.0E-03 ;ENDIT(R1)=1.0E-03
 ENDIT(R2)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.5)
 RELAX(V1,FALSDT,0.1)
 RELAX(V2,FALSDT,0.1)
 RELAX(W1,FALSDT,0.1)
 RELAX(W2,FALSDT,0.1)
 RELAX(R1,LINRLX,0.5)
 RELAX(R2,LINRLX,0.5)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(V2)=1.0E+06 ;VARMIN(V2)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(W2)=1.0E+06 ;VARMIN(W2)=-1.0E+06
 VARMAX(R1)=1. ;VARMIN(R1)=1.0E-06
 VARMAX(R2)=1. ;VARMIN(R2)=1.0E-06
 ************************************************************
  Group 19. Data transmitted to GROUND
 NAMSAT =MOSG
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 RG( 1) =20.
 RG( 3) =0.02
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=1108. ;EX(V1)=5.782E-03
 EX(V2)=5.586E-03 ;EX(W1)=0.4913
 EX(W2)=0.5943 ;EX(R1)=0.9144
 EX(R2)=0.08557
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(V2,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(W2,Y,N,Y,Y,Y,Y)
 OUTPUT(R1,Y,N,Y,Y,Y,Y)
 OUTPUT(R2,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 3 ;IZMON = 10
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = 1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP