TALK=T;RUN(1,1)
PHOTON USE
p; ; ; ; ;
cl;gr ou y 1
msg Contours of temperature T1
con tem1 y 1 fi;0.005 ; pause
pause
cl;gr ou y 1
msg Contours of coefficients APCO:
con apt1 j 1 fi;0.005
pause
cl;gr ou y 1
msg Contours of coefficients AECO:
con aet1 j 1 fi;0.005
pause
cl;gr ou y 1
msg Contours of coefficients AWCO:
con awt1 j 1 fi;0.005
pause
cl;gr ou y 1
msg Contours of coefficients ALCO:
con alt1 j 1 fi;0.005
pause
cl;gr ou y 1
msg Contours of coefficients AhCO:
con aht1 j 1 fi;0.005
pause
cl;gr ou y 1
msg Contours of residuals of temperature RES:
con tres j 1 fi;0.005
pause
cl;gr ou y 1
msg Contours of temperature corrections CORR:
con tcor j 1 fi;0.005
pause
AUTOPLOT
file
phi 5
aphi 2
data 1 tem1 z 1
col3 1
data 1 tem1 z 3
colf 2
data 2 dist anal
BLB4 3
REDR
msg Tem1 at z=1 Blue ; at z=3 Red ;Analytic solution Crosses
ENDUSE
DISPLAY
This case uses the geometry and finer grid volumes of F301.
Temperatures at opposite boundaries along x-direction is
fixed as boundary conditions. Then, uniform u1 is imposed
in the direction of the temperature gradient. The soulution
is one dimensional with exponential profile
(exp((u1*rho1*cp1)/cond)*x) - 1
T(x) =(------------------------------------------ )*(T2-T1)+T1
( exp((u1*rho1*cp1)/cond)*L) -1
at x=0 T=T1 ; at x=L T=T2
In-Form facility is used for printing coefficients, residuals
and corrections and extinction coeffieint.
PHOTON use is available. AUTOPLOT is used to show the comparison
of the analytic and PHOENICS solution. Save following table file
as aphi to use autoplot, then copy it to working directory.
----------- aphi ------
DIST Anal
5.000E-01 1.998E+03
1.500E+00 1.992E+03
2.500E+00 1.979E+03
3.500E+00 1.955E+03
4.500E+00 1.907E+03
5.500E+00 1.815E+03
6.500E+00 1.635E+03
7.500E+00 1.285E+03
----------- aphi ------
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(F310 FOR X-Z PLANE )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 8
XULAST =8.
XFRAC(1)=0.125 ;XFRAC(2)=0.25
XFRAC(3)=0.375 ;XFRAC(4)=0.5
XFRAC(5)=0.625 ;XFRAC(6)=0.75
XFRAC(7)=0.875 ;XFRAC(8)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 1
YVLAST =1.
YFRAC(1)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 6
ZWLAST =6.
ZFRAC(1)=0.166667 ;ZFRAC(2)=0.333333
ZFRAC(3)=0.5 ;ZFRAC(4)=0.666667
ZFRAC(5)=0.833333 ;ZFRAC(6)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(3)=U1 ;NAME(7)=W1
NAME(141)=TRES ;NAME(142)=GAT1
NAME(143)=ALT1 ;NAME(144)=AHT1
NAME(145)=AWT1 ;NAME(146)=AET1
NAME(147)=APT1 ;NAME(148)=TCOR
NAME(149)=TEM1 ;NAME(150)=PRPS
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(U1,Y,N,N,N,N,Y)
SOLUTN(W1,Y,N,N,N,N,Y)
SOLUTN(TRES,Y,N,N,N,N,Y)
SOLUTN(GAT1,Y,N,N,N,N,Y)
SOLUTN(ALT1,Y,N,N,N,N,Y)
SOLUTN(AHT1,Y,N,N,N,N,Y)
SOLUTN(AWT1,Y,N,N,N,N,Y)
SOLUTN(AET1,Y,N,N,N,N,Y)
SOLUTN(APT1,Y,N,N,N,N,Y)
SOLUTN(TCOR,Y,N,N,N,N,Y)
SOLUTN(TEM1,Y,Y,Y,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
PRPS = 150
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(TEM1,N,Y,Y,Y,N,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =1.0E+05
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =0.015 ;ENUT =0.
PRNDTL(TEM1)=1.
PRT(TEM1)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(U1)=1.0E-02 ;FIINIT(W1)=1.0E-10
FIINIT(TRES)=1.0E-10 ;FIINIT(GAT1)=1.0E-10
FIINIT(ALT1)=1.0E-10 ;FIINIT(AHT1)=1.0E-10
FIINIT(AWT1)=1.0E-10 ;FIINIT(AET1)=1.0E-10
FIINIT(APT1)=1.0E-10 ;FIINIT(TCOR)=1.0E-10
FIINIT(TEM1)=1.0E-10 ;FIINIT(PRPS)=-1.
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(^OB1 ,CELL , 1, 0, 0, 0, 0, 0, 1, 1)
PATCH(^OB2 ,CELL , 2, 0, 0, 0, 0, 0, 1, 1)
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 1 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-03
************************************************************
Group 16. Terminate Iterations
LITER(TEM1)=1
ENDIT(TEM1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(U1,LINRLX,1.)
RELAX(W1,LINRLX,1.)
RELAX(TRES,LINRLX,1.)
RELAX(GAT1,LINRLX,1.)
RELAX(ALT1,LINRLX,1.)
RELAX(AHT1,LINRLX,1.)
RELAX(AWT1,LINRLX,1.)
RELAX(AET1,LINRLX,1.)
RELAX(APT1,LINRLX,1.)
RELAX(TCOR,LINRLX,1.)
RELAX(TEM1,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(TRES)=1.0E+10 ;VARMIN(TRES)=-1.0E+10
VARMAX(GAT1)=1.0E+10 ;VARMIN(GAT1)=-1.0E+10
VARMAX(ALT1)=1.0E+10 ;VARMIN(ALT1)=-1.0E+10
VARMAX(AHT1)=1.0E+10 ;VARMIN(AHT1)=-1.0E+10
VARMAX(AWT1)=1.0E+10 ;VARMIN(AWT1)=-1.0E+10
VARMAX(AET1)=1.0E+10 ;VARMIN(AET1)=-1.0E+10
VARMAX(APT1)=1.0E+10 ;VARMIN(APT1)=-1.0E+10
VARMAX(TCOR)=1.0E+10 ;VARMIN(TCOR)=-1.0E+10
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
ISG62 = 0
SPEDAT(SET,FGMB_ITR,TEM1,I,10000)
SPEDAT(SET,STORED,APT1,C,=APCO(TEM1)!EQCOEF)
SPEDAT(SET,STORED,AET1,C,=AECO(TEM1)!EQCOEF)
SPEDAT(SET,STORED,AWT1,C,=AWCO(TEM1)!EQCOEF)
SPEDAT(SET,STORED,ALT1,C,=ALCO(TEM1)!EQCOEF)
SPEDAT(SET,STORED,AHT1,C,=AHCO(TEM1)!EQCOEF)
SPEDAT(SET,STORED,GAT1,C,=GAMM(TEM1)!GAMCOF)
SPEDAT(SET,STORED,TRES,C,=RESI(TEM1)!RESIDU)
SPEDAT(SET,STORED,TCOR,C,=CORR(TEM1)!CORREC)
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,OBJNAM,^OB1,C,B5)
SPEDAT(SET,OBJTYP,^OB1,C,FINE_GRID_VOL)
SPEDAT(SET,^OB1,FINEX,I,6)
SPEDAT(SET,^OB1,FINEY,I,1)
SPEDAT(SET,^OB1,FINEZ,I,6)
SPEDAT(SET,OBJNAM,^OB2,C,B6)
SPEDAT(SET,OBJTYP,^OB2,C,FINE_GRID_VOL)
SPEDAT(SET,^OB2,FINEX,I,6)
SPEDAT(SET,^OB2,FINEY,I,1)
SPEDAT(SET,^OB2,FINEZ,I,6)
SPEDAT(SET,OBJNAM,^OB3,C,B3)
SPEDAT(SET,OBJTYP,^OB3,C,PLATE)
SPEDAT(SET,OBJNAM,^OB4,C,B4)
SPEDAT(SET,OBJTYP,^OB4,C,PLATE)
SPEDAT(SET,OBJNAM,^OB5,C,B7)
SPEDAT(SET,OBJTYP,^OB5,C,PLATE)
SPEDAT(SET,OBJNAM,^OB6,C,B8)
SPEDAT(SET,OBJTYP,^OB6,C,PLATE)
SPEDAT(SET,FACETDAT,NUMOBJ,I,6)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(U1,Y,N,Y,N,N,N)
OUTPUT(W1,Y,N,Y,N,N,N)
OUTPUT(TRES,Y,N,Y,N,N,N)
OUTPUT(GAT1,Y,N,Y,N,N,N)
OUTPUT(ALT1,Y,N,Y,N,N,N)
OUTPUT(AHT1,Y,N,Y,N,N,N)
OUTPUT(AWT1,Y,N,Y,N,N,N)
OUTPUT(AET1,Y,N,Y,N,N,N)
OUTPUT(APT1,Y,N,Y,N,N,N)
OUTPUT(TCOR,Y,N,Y,N,N,N)
OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
OUTPUT(PRPS,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 1 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP