TALK=T;RUN(1,1)
  DISPLAY
   This  case  concerns  steady,  axisymmetric,  isothermal,
   incompressible and laminar or fully turbulent flow in the
   turnaround duct. The geometry of the case is the same, as
   was used in the 1st test case for the WUA-CFD meeting  in
   Basel (1994).

   The main objective of this library case is to demonstrate
   the use  of MB-FGE  technique to  calculate flows  in the
   curved ducts. For this reason default grid sizes are  not
   enough for accurate assesement of the flow.

   Calculations  of  the  turbulent  flow (LTURB=T) could be
   made with low-Re extensions of whether standard K-E model
   (LOWKE=T) or 2-layer K-E model (LOWKE=F).

   This Q1 file includes Photon Use information.
   ---------------------------------------------------------
  ENDDIS
  PHOTON USE
   p ; ; ; ; ;

   msg Computational Domain:
   mgrid 1 k 1
   mgrid 2 k 1 col 2
   mgrid 3 k 1 col 4
   msg Press Any Key to Continue...
   pause
   cl
   set vec av off
   msg Velocity Vectors:
   mvec 1 k 1 sh
   mvec 2 k 1 sh
   mvec 3 k 1 sh
   msg Press Any Key to Continue...
   pause
   cl
   msg Contours of W-velocity Resolutes:
   mcon 1 uc1 k 1 fi
   0.0001
   mcon 2 uc1 k 1 fi
   0.0001
   mcon 3 uc1 k 1 fi
   0.0001
   msg Press Any Key to Continue...
   pause
   cl
   msg Contours of Pressure:
   mcon 1 p1 k 1 fi
   0.0001
   mcon 2 p1 k 1 fi
   0.0001
   mcon 3 p1 k 1 fi
   0.0001
   msg Press E  to exit PHOTON ...
   pause
  ENDUSE
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(MB-FGE: Case 1 (WUA-CFD-94, Laminar).   )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 150
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 167
 XULAST =0.112891
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 16
 YVLAST =0.045
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =6.3E-03
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = F
 NUMBLK = 3
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1, 168,   1,  17,   1,   2)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
 CCM = T
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(144)=PRPS
 NAME(145)=VC1 ;NAME(146)=UC1
 NAME(147)=WCRT ;NAME(148)=VCRT
 NAME(149)=UCRT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,N)
 SOLUTN(VC1,Y,Y,Y,N,N,Y)
 SOLUTN(UC1,Y,Y,Y,N,N,Y)
 SOLUTN(WCRT,Y,N,N,N,N,N)
 SOLUTN(VCRT,Y,N,N,N,N,N)
 SOLUTN(UCRT,Y,N,N,N,N,N)
 PRPS = 144
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,N,N,N,N,N,N)
 TERMS(V1,N,N,N,N,N,N)
 TERMS(VC1,N,Y,Y,Y,N,Y)
 TERMS(UC1,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =317.799988 ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =5.058821E-05 ;ENUT =0.
 PRNDTL(VC1)=1. ;PRNDTL(UC1)=1.
 PRT(VC1)=1. ;PRT(UC1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(PRPS)=-1.
 FIINIT(VC1)=1.0E-05 ;FIINIT(UC1)=1.0E-05
 FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=1.0E-10
 FIINIT(UCRT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(MBD1 ,CELL , 1, 20, 1, 6, 1, 1, 1, 1)
 
 PATCH(MBD2 ,CELL , 22, 88, 1, 16, 1, 1, 1, 1)
 
 PATCH(MBD3 ,CELL , 90, 167, 1, 12, 1, 1, 1, 1)
 
 PATCH(MBL2.3 ,VOLUME, 36, 74, 11, 16, 1, 1, 1, 1)
 
 PATCH(MBL3.2 ,VOLUME, 90, 167, 1, 12, 1, 1, 1, 1)
 
 PATCH(MBL1.2 ,NORTH , 1, 14, 6, 6, 1, 1, 1, 1)
 
 PATCH(MBL2.1 ,SOUTH , 22, 35, 1, 1, 1, 1, 1, 1)
 
 PATCH(IN1 ,WEST , 1, 1, 1, 6, 1, 1, 1, 1)
 COVAL(IN1 ,P1 , FIXFLU ,317.799988 )
 COVAL(IN1 ,VC1 ,0. ,0. )
 COVAL(IN1 ,UC1 ,0. ,1. )
 
 PATCH(IN2 ,WEST , 22, 22, 1, 16, 1, 1, 1, 1)
 COVAL(IN2 ,P1 , FIXFLU ,317.799988 )
 COVAL(IN2 ,VC1 ,0. ,0. )
 COVAL(IN2 ,UC1 ,0. ,1. )
 
 PATCH(WE ,EWALL , 20, 20, 1, 6, 1, 1, 1, 1)
 COVAL(WE ,VC1 ,1. ,0. )
 COVAL(WE ,UC1 ,1. ,0. )
 
 PATCH(WN ,NWALL , 22, 88, 16, 16, 1, 1, 1, 1)
 COVAL(WN ,VC1 ,1. ,0. )
 COVAL(WN ,UC1 ,1. ,0. )
 
 PATCH(WS ,SWALL , 42, 88, 1, 1, 1, 1, 1, 1)
 COVAL(WS ,VC1 ,1. ,0. )
 COVAL(WS ,UC1 ,1. ,0. )
 
 PATCH(OUT ,EAST , 88, 88, 1, 16, 1, 1, 1, 1)
 COVAL(OUT ,P1 ,1.0E+05 ,0. )
 COVAL(OUT ,VC1 ,0. ,0. )
 COVAL(OUT ,UC1 ,0. ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 500 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-03
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(VC1)=20
 LITER(UC1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(VC1)=1.0E-03
 ENDIT(UC1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.1)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(PRPS,LINRLX,1.)
 RELAX(VC1,FALSDT,0.067857)
 RELAX(UC1,FALSDT,0.067857)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(VC1)=1.0E+10 ;VARMIN(VC1)=-1.0E+10
 VARMAX(UC1)=1.0E+10 ;VARMIN(UC1)=-1.0E+10
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 CONWIZ = T
 LSG3 = T
 LSG4 = T
 ISG62 = 1
 CSG3    ='LCRU'
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(VC1,Y,N,Y,Y,Y,Y)
 OUTPUT(UC1,Y,N,Y,Y,Y,Y)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 11 ;IYMON = 4 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP