TALK=T;RUN(1,1)
PHOTON USE
p
text
1
1
Particles are bounced off a heated solid surface
0.77542E+03 0.26315E+04 CR
text
1
1
in this CONJUGATE HEAT TRANSFER case.
0.77542E+03 0.25012E+04 CR
upause 5
gr out x 1
gr out x 1 y 5 6 z 4 5 col 15
text
1
15
SOLID
0.12753E+04 0.11268E+04 CR
GEOMETRY READ
T00001
upause 1
GEOMETRY READ
T00002
upause 1
GEOMETRY READ
T00003
upause 1
GEOMETRY READ
T00004
upause 1
GEOMETRY READ
T00005
upause 1
GEOMETRY READ
T00006
upause 1
GEOMETRY READ
T00007
upause 1
GEOMETRY READ
T00008
upause 1
GEOMETRY READ
T00009
upause 1
GEOMETRY READ
T00010
upause 1
GEOMETRY READ
T00011
upause 1
GEOMETRY READ
T00012
upause 1
GEOMETRY READ
T00013
upause 5
set vec ref 4.0
vec x 1 y 1 m z 1 3
vec x 1 y 1 4 z 4 6
vec x 1 y 7 m z 4 6
vec x 1 y 1 m z 6 m
upause 2
text
3
Press e to end
0.77542E+03 0.20265E+04 CR
enduse
DISPLAY
This case deals with conjugate heat transfer between a metal
solid which stands in the middle of a curved 2-D duct, and a
cold air stream which flows through the duct,passing
the 'obstacle'. The geometry is represented by means
of body-fitted coordinates; Both air and liquid droplets
are heated by the solid.
ENDDIS
60
*__YP__ZP__VP__WP__DIAM_LIQDEN_FRATE_TEMP_(NUMB)
0.0001 0.0001 3.2 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 3.1 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 3.0 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 2.8 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 2.6 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 2.4 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 2.2 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 2.15 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 2.1 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 2.05 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 2.0 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 1.95 1.0 9.e-5 1000.0 1.e-6 293.0
0.0001 0.0001 1.90 1.0 9.e-5 1000.0 1.e-6 293.0
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(PARTICLES IN 2D CURVED DUCT: G506 )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 1
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 1
XULAST =1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 10
YVLAST =0.05
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 10
ZWLAST =0.2
************************************************************
Group 6. Body-Fitted Coordinates
BFC = T ;NONORT = F
NCRT = 1
RSTGEO = F ;SAVGEO = F
UUP = F ;VUP = F ;WUP = F
NGEOM =CHAM
NAMXYZ =CHAM
ANGMIN =20.
DOMAIN( 1, 2, 1, 11, 1, 11)
* Set fixed sub-domain
FIXDOM( 1, 0, 0, 0, 0, 0, 0)
FIXDOM( 2, 0, 0, 0, 0, 0, 0)
FIXDOM( 3, 0, 0, 0, 0, 0, 0)
FIXDOM( 4, 0, 0, 0, 0, 0, 0)
FIXDOM( 5, 0, 0, 0, 0, 0, 0)
FIXDOM( 6, 0, 0, 0, 0, 0, 0)
FIXDOM( 7, 0, 0, 0, 0, 0, 0)
FIXDOM( 8, 0, 0, 0, 0, 0, 0)
FIXDOM( 9, 0, 0, 0, 0, 0, 0)
FIXDOM( 10, 0, 0, 0, 0, 0, 0)
LIJ = F ;LJK = T ;LIK = F
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(5)=V1
NAME(7)=W1 ;NAME(21)=VAPO
NAME(139)=MASS ;NAME(140)=HEAT
NAME(141)=MOMZ ;NAME(142)=MOMY
NAME(143)=VISL ;NAME(144)=DEN1
NAME(145)=BLOK ;NAME(146)=PRPS
NAME(147)=TEM1 ;NAME(148)=WCRT
NAME(149)=VCRT ;NAME(150)=UCRT
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,Y,N,N,N)
SOLUTN(V1,Y,Y,N,N,N,Y)
SOLUTN(W1,Y,Y,N,N,N,Y)
SOLUTN(VAPO,Y,Y,N,N,N,Y)
SOLUTN(MASS,Y,N,N,N,N,Y)
SOLUTN(HEAT,Y,N,N,N,N,Y)
SOLUTN(MOMZ,Y,N,N,N,N,Y)
SOLUTN(MOMY,Y,N,N,N,N,Y)
SOLUTN(VISL,Y,N,N,N,N,Y)
SOLUTN(DEN1,Y,N,N,N,N,Y)
SOLUTN(BLOK,Y,N,N,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(TEM1,Y,Y,N,N,N,Y)
SOLUTN(WCRT,Y,N,N,N,N,N)
SOLUTN(VCRT,Y,N,N,N,N,N)
SOLUTN(UCRT,Y,N,N,N,N,N)
DEN1 = 144
VISL = 143
IVARBK = 50 ;ISOLBK = 1
PRNITS= F ;OPTRLX= F ;NOSIP= F ;ALLVBC= F
DBSOLV= F ;IMPINI= F ;EARL1D= F
PRPS = 146
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
TERMS(VAPO,N,Y,Y,Y,N,Y)
TERMS(TEM1,N,Y,Y,Y,N,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =1.0E+05
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1.0E-05 ;ENUT =0.
PRNDTL(V1)=1. ;PRNDTL(W1)=1.
PRNDTL(VAPO)=1. ;PRNDTL(TEM1)=1.
PRT(V1)=1. ;PRT(W1)=1.
PRT(VAPO)=1. ;PRT(TEM1)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
FIINIT(W1)=1. ;FIINIT(VAPO)=0.
FIINIT(MASS)=1.0E-10 ;FIINIT(HEAT)=1.0E-10
FIINIT(MOMZ)=1.0E-10 ;FIINIT(MOMY)=1.0E-10
FIINIT(VISL)=1.0E-10 ;FIINIT(DEN1)=1.0E-10
FIINIT(BLOK)=1. ;FIINIT(PRPS)=0.
FIINIT(TEM1)=293. ;FIINIT(WCRT)=1.0E-10
FIINIT(VCRT)=1.0E-10 ;FIINIT(UCRT)=1.0E-10
PATCH(SOLID ,INIVAL, 1, 1, 5, 6, 4, 5, 1, 1)
INIT(SOLID ,BLOK,0. ,2. )
INIT(SOLID ,PRPS,0. ,103. )
INIT(SOLID ,TEM1,0. ,793. )
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(SOLIDS ,CELL , 1, 1, 1, 10, 1, 10, 1, 1)
COVAL(SOLIDS ,P1 ,0. ,0. )
COVAL(SOLIDS ,V1 ,0. ,0. )
COVAL(SOLIDS ,W1 ,0. ,1. )
COVAL(SOLIDS ,TEM1,0. ,293. )
PATCH(GXINL ,LOW , 1, 1, 1, 10, 1, 1, 1, 1)
COVAL(GXINL ,P1 , FIXFLU ,1.29 )
COVAL(GXINL ,V1 ,0. ,0. )
COVAL(GXINL ,W1 ,0. ,1. )
COVAL(GXINL ,VAPO,0. ,0. )
COVAL(GXINL ,TEM1,0. ,293. )
PATCH(HOTHOT ,CELL , 1, 1, 5, 6, 4, 5, 1, 1)
COVAL(HOTHOT ,TEM1, FIXFLU ,793. )
PATCH(GXOUT ,HIGH , 1, 1, 1, 10, 10, 10, 1, 1)
COVAL(GXOUT ,P1 ,1.0E+05 ,0. )
COVAL(GXOUT ,W1 ,0. , SAME )
PATCH(WALL1 ,NWALL , 1, 1, 10, 10, 1, 10, 1, 1)
COVAL(WALL1 ,W1 ,1. ,0. )
PATCH(WALL2 ,SWALL , 1, 1, 1, 1, 1, 10, 1, 1)
COVAL(WALL2 ,W1 ,1. ,0. )
PATCH(GENPAT ,CELL , 1, 1, 1, 10, 1, 10, 1, 1)
COVAL(GENPAT ,V1 , FIXFLU , GRND )
COVAL(GENPAT ,W1 , FIXFLU , GRND )
COVAL(GENPAT ,VAPO, FIXFLU , GRND )
COVAL(GENPAT ,TEM1, FIXFLU , GRND )
PATCH(GENMAS ,CELL , 1, 1, 1, 10, 1, 10, 1, 1)
COVAL(GENMAS ,P1 , FIXFLU , GRND )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 70 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(V1)=10
LITER(W1)=10 ;LITER(VAPO)=20
LITER(TEM1)=100
ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
ENDIT(W1)=1.0E-03 ;ENDIT(VAPO)=1.0E-03
ENDIT(TEM1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,0.7)
RELAX(V1,LINRLX,0.5)
RELAX(W1,LINRLX,0.5)
RELAX(VAPO,LINRLX,0.7)
RELAX(MASS,LINRLX,1.)
RELAX(HEAT,LINRLX,1.)
RELAX(MOMZ,LINRLX,1.)
RELAX(MOMY,LINRLX,1.)
RELAX(VISL,LINRLX,1.)
RELAX(DEN1,LINRLX,1.)
RELAX(BLOK,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
RELAX(TEM1,LINRLX,0.5)
RELAX(WCRT,LINRLX,1.)
RELAX(VCRT,LINRLX,1.)
RELAX(UCRT,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(VAPO)=1.0E+10 ;VARMIN(VAPO)=-1.0E+10
VARMAX(MASS)=1.0E+10 ;VARMIN(MASS)=-1.0E+10
VARMAX(HEAT)=1.0E+10 ;VARMIN(HEAT)=-1.0E+10
VARMAX(MOMZ)=1.0E+10 ;VARMIN(MOMZ)=-1.0E+10
VARMAX(MOMY)=1.0E+10 ;VARMIN(MOMY)=-1.0E+10
VARMAX(VISL)=1.0E+10 ;VARMIN(VISL)=-1.0E+10
VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
VARMAX(BLOK)=1.0E+10 ;VARMIN(BLOK)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,GENTRA,RESTART,C,NONE)
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,MATERIAL,0,L,T)
SPEDAT(SET,MATERIAL,103,L,T)
LG( 20) = T
IG( 9) = 10
IG( 10) = 1
IG( 11) = 20
IG( 12) = 1
IG( 14) = 4
IG( 15) = 1000
IG( 16) = 5
IG( 17) = 10
IG( 18) = 1
IG( 19) = 3
IG( 20) = 60
RG( 51) =1.572
RG( 52) =1165.
RG( 53) =0.01748
RG( 54) =6.5
RG( 55) =0.2902
RG( 56) =1.468
RG( 57) =3.888
RG( 58) =1.045
RG( 71) = GRND1
RG( 72) =4131.799805
RG( 74) =1.0E+05
RG( 75) = GRND1
RG( 76) = GRND1
RG( 77) =5.0E+04
RG( 80) =2.0E-03
RG( 82) =1.0E+04
RG( 83) =10.
RG( 84) =1.
RG( 86) =18.
RG( 87) =29.
RG( 88) = GRND1
RG( 89) =4005.
RG( 90) = GRND1
RG( 91) = GRND1
RG( 92) =273.149994
RG( 93) =1.
RG( 94) =3.335E+05
RG( 95) = GRND1
RG( 96) =0.0263
RG( 97) = GRND1
RG( 99) =-9.8
CG( 6) ='GHIS'
CG( 8) ='Q1'
CG( 9) ='NONE'
CG( 10) ='T'
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(V1,Y,N,Y,Y,Y,Y)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(VAPO,Y,N,Y,Y,Y,Y)
OUTPUT(MASS,Y,N,Y,N,N,N)
OUTPUT(HEAT,Y,N,Y,N,N,N)
OUTPUT(MOMZ,Y,N,Y,N,N,N)
OUTPUT(MOMY,Y,N,Y,N,N,N)
OUTPUT(VISL,Y,N,Y,N,N,N)
OUTPUT(DEN1,Y,N,Y,N,N,N)
OUTPUT(BLOK,Y,N,Y,N,N,N)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
OUTPUT(WCRT,Y,N,Y,N,N,N)
OUTPUT(VCRT,Y,N,Y,N,N,N)
OUTPUT(UCRT,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 8 ;IZMON = 7
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = 1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP