TALK=T;RUN(1,1)
  
    60
    60
  *_XP__UP__DI_LDEN_MDOT_TEM_(NUM)
  1.0  10.  10.e-5 1000. 2.5 298.
  
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(1D Evaporation of a Water Jet in a Duct )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 1
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 10
 XULAST =30.
 XFRAC(1)=0.1 ;XFRAC(2)=0.2
 XFRAC(3)=0.3 ;XFRAC(4)=0.4
 XFRAC(5)=0.5 ;XFRAC(6)=0.6
 XFRAC(7)=0.7 ;XFRAC(8)=0.8
 XFRAC(9)=0.9 ;XFRAC(10)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 1
 YVLAST =5.
 YFRAC(1)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =5.
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(136)=VAPO ;NAME(137)=MASS
 NAME(138)=HEAT ;NAME(139)=SPH1
 NAME(140)=KOND ;NAME(141)=ENUL
 NAME(142)=DEN1 ;NAME(143)=MOMX
 NAME(149)=TEM1 ;NAME(150)=TDEC
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(VAPO,Y,Y,N,N,N,Y)
 SOLUTN(MASS,Y,N,N,N,N,Y)
 SOLUTN(HEAT,Y,N,N,N,N,Y)
 SOLUTN(SPH1,Y,N,N,N,N,Y)
 SOLUTN(KOND,Y,N,N,N,N,Y)
 SOLUTN(ENUL,Y,N,N,N,N,Y)
 SOLUTN(DEN1,Y,N,N,N,N,Y)
 SOLUTN(MOMX,Y,N,N,N,N,Y)
 SOLUTN(TEM1,Y,Y,Y,N,N,Y)
 SOLUTN(TDEC,Y,N,N,N,N,N)
 DEN1 = 142
 VISL = 141
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(VAPO,N,Y,Y,Y,Y,Y)
 TERMS(TEM1,Y,Y,Y,Y,N,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWRH1 = T
 NEWENL = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 DENPCO = T
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 = GRND5 ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =1.0E+05
 DVO1DT =3.33E-03 ;DRH1DP = GRND5
 RHO1A =0. ;RHO1B =3.4843E-03 ;RHO1C =0.71429
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL = GRND2 ;ENUT =2.0E-03
 ENULA =-4.94679E-06 ;ENULB =4.58394E-08 ;ENULC =8.0974E-11 ;ENULD =0.
 ENULE =0. ;ENULF =0. ;ENULG =0.
 IENULA = 0 ;IENULB = 0
 PRNDTL(U1)=1. ;PRNDTL(VAPO)=1.
 PRNDTL(TEM1)=-0.0263
 PRT(U1)=1. ;PRT(VAPO)=1.
 PRT(TEM1)=1.
 CP1 =1150. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(VAPO)=0. ;FIINIT(MASS)=1.0E-10
 FIINIT(HEAT)=1.0E-10 ;FIINIT(SPH1)=1.0E-10
 FIINIT(KOND)=1.0E-10 ;FIINIT(ENUL)=1.0E-10
 FIINIT(DEN1)=1.0E-10 ;FIINIT(MOMX)=1.0E-10
 FIINIT(TEM1)=1051. ;FIINIT(TDEC)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(GENPAT ,CELL , 1, 10, 1, 1, 1, 1, 1, 1)
 COVAL(GENPAT ,U1 , FIXFLU , GRND )
 COVAL(GENPAT ,VAPO, FIXFLU , GRND )
 COVAL(GENPAT ,TEM1, FIXFLU , GRND )
 
 PATCH(GENMAS ,CELL , 1, 10, 1, 1, 1, 1, 1, 1)
 COVAL(GENMAS ,P1 , FIXFLU , GRND )
 
 PATCH(OB1 ,WEST , 1, 1, 1, 1, 1, 1, 1, 1)
 COVAL(OB1 ,P1 , FIXFLU ,1.000004 )
 COVAL(OB1 ,U1 ,0. ,3.0164 )
 COVAL(OB1 ,TEM1,0. ,1051. )
 
 PATCH(^GX2 ,EAST , 2, 0, 0, 0, 0, 0, 1, 1)
 COVAL(^GX2 ,P1 ,1000. ,0. )
 COVAL(^GX2 ,U1 ,0. ,0. )
 COVAL(^GX2 ,TEM1,0. , SAME )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 150 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-03
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(VAPO)=20 ;LITER(TEM1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(VAPO)=1.0E-03 ;ENDIT(TEM1)=1.0E-04
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.7)
 RELAX(U1,FALSDT,1.0E-02)
 RELAX(VAPO,LINRLX,0.1)
 RELAX(MASS,LINRLX,0.1)
 RELAX(HEAT,LINRLX,0.1)
 RELAX(SPH1,LINRLX,1.)
 RELAX(KOND,LINRLX,1.)
 RELAX(ENUL,LINRLX,1.)
 RELAX(DEN1,LINRLX,0.1)
 RELAX(MOMX,LINRLX,0.1)
 RELAX(TEM1,FALSDT,1.)
 RELAX(TDEC,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-8.0E+04
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(VAPO)=1.0E+10 ;VARMIN(VAPO)=-1.0E+10
 VARMAX(MASS)=1.0E+10 ;VARMIN(MASS)=-1.0E+10
 VARMAX(HEAT)=1.0E+10 ;VARMIN(HEAT)=-1.0E+10
 VARMAX(SPH1)=1.0E+10 ;VARMIN(SPH1)=-1.0E+10
 VARMAX(KOND)=1.0E+10 ;VARMIN(KOND)=-1.0E+10
 VARMAX(ENUL)=1.0E+10 ;VARMIN(ENUL)=-1.0E+10
 VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=1.0E-05
 VARMAX(MOMX)=1.0E+10 ;VARMIN(MOMX)=-1.0E+10
 VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=273.
 VARMAX(TDEC)=1.0E+10 ;VARMIN(TDEC)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GENTRA,RESTART,C,NONE)
 SPEDAT(SET,STORED,TDEC,C,=TEM1-273.!ZSLFIN)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,OBJNAM,!OB1,C,INLET)
 SPEDAT(SET,OBJTYP,!OB1,C,INLET)
 SPEDAT(SET,OBJNAM,^GX2,C,B4)
 SPEDAT(SET,OBJTYP,^GX2,C,OUTLET)
 SPEDAT(SET,ARATIO,^GX2,R,1.)
 SPEDAT(SET,FACETDAT,NUMOBJ,I,2)
 IG( 9) = 1
 IG( 10) = 1
 IG( 14) = 10
 IG( 15) = 10000
 IG( 16) = 5
 IG( 17) = 1
 IG( 18) = 1
 IG( 19) = 4
 IG( 20) = 60
 RG( 71) = GRND1
 RG( 72) =4131.799805
 RG( 73) =5.0E-06
 RG( 74) = GRND1
 RG( 75) = GRND1
 RG( 76) = GRND1
 RG( 77) =0.2
 RG( 80) =1.0E-03
 RG( 82) =4131.799805
 RG( 83) =100.
 RG( 84) =1.
 RG( 86) =18.
 RG( 87) =28.9
 RG( 88) = GRND1
 RG( 89) =1150.
 RG( 90) = GRND1
 RG( 91) =273.149994
 RG( 92) =273.149994
 RG( 93) =1.
 RG( 94) =3.335E+05
 RG( 95) = GRND1
 RG( 96) =0.0263
 RG( 97) = GRND1
 CG(  6) ='GHIS'
 CG(  8) ='Q1'
 CG(  9) ='H'
 CG( 10) ='T'
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=0.1207 ;EX(U1)=2.564
 EX(VAPO)=0.09082 ;EX(MASS)=0.25
 EX(HEAT)=4.542E+05 ;EX(SPH1)=1150.
 EX(KOND)=0.0263 ;EX(ENUL)=8.572E-05
 EX(DEN1)=0.4289 ;EX(MOMX)=2.5
 EX(TEM1)=812.299988 ;EX(TDEC)=539.299988
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(VAPO,Y,N,Y,Y,Y,Y)
 OUTPUT(MASS,Y,N,Y,N,N,N)
 OUTPUT(HEAT,Y,N,Y,N,N,N)
 OUTPUT(SPH1,Y,N,Y,N,N,N)
 OUTPUT(KOND,Y,N,Y,N,N,N)
 OUTPUT(ENUL,Y,N,Y,N,N,N)
 OUTPUT(DEN1,Y,N,Y,N,N,N)
 OUTPUT(MOMX,Y,N,Y,N,N,N)
 OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
 OUTPUT(TDEC,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 8 ;IYMON = 1 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = 1 ;IXPRF = 1 ;IXPRL = 8
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP