TALK=T;RUN(1,1)
DISPLAY
A simple case to demonstrate the effect of thermal
diffusion on the fields of H2 (in C1) and N2 (in C2).
The when the temperature gradients are positive, the
thermal diffusion acts against the bulk mass-flux and
acts to establish a negative gradient in H2 in the
cross-flow direction. When the temperature gradient
is reversed, the thermal diffusion acts with the bulk
mass-flux causing the overall values of H2 to be smaller
and a positive gradient to be established in the cross-
flow direction.
ENDDISPLAY
PHOTON USE
p
phi
view z
norm
gr ou z 1
msg Contours of the temperature
cont tem1 z 1 fil;.001
msg
msg Press to continue
pause
gr ou z 1
msg Contours of the light species (H2)
cont h2 z 1 fil;.001
msg
msg Press to continue
pause
msg
msg Press e to END
enduse
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(Thermal Diffusion Test-Case: XY-plane )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 14
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 5
XULAST =1.
XFRAC(1)=0.2 ;XFRAC(2)=0.4
XFRAC(3)=0.6 ;XFRAC(4)=0.8
XFRAC(5)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 5
YVLAST =1.
YFRAC(1)=0.2 ;YFRAC(2)=0.4
YFRAC(3)=0.6 ;YFRAC(4)=0.8
YFRAC(5)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 1
ZWLAST =1.
ZFRAC(1)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(3)=U1
NAME(5)=V1 ;NAME(16)=C1
NAME(17)=C2 ;NAME(149)=ELH
NAME(150)=TEM1
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,N,N,N,Y)
SOLUTN(U1,Y,Y,N,N,N,Y)
SOLUTN(V1,Y,Y,N,N,N,Y)
SOLUTN(C1,Y,Y,N,N,N,Y)
SOLUTN(C2,Y,Y,N,N,N,Y)
SOLUTN(ELH,Y,N,N,N,N,Y)
SOLUTN(TEM1,Y,N,N,N,N,Y)
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(U1,Y,Y,Y,Y,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
TERMS(C1,N,Y,Y,Y,Y,Y)
TERMS(C2,N,Y,Y,Y,N,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =300. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1.0E-05 ;ENUT =0.
PRNDTL(U1)=1. ;PRNDTL(V1)=1.
PRNDTL(C1)=-GRND9 ;PRNDTL(C2)=-GRND9
PRT(U1)=1. ;PRT(V1)=1.
PRT(C1)=1. ;PRT(C2)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
FIINIT(V1)=1.0E-10 ;FIINIT(C1)=0.5
FIINIT(C2)=0.5 ;FIINIT(ELH)=1.0E-10
FIINIT(TEM1)=1.0E-10
PATCH(WHOLEX ,LINVLX, 1, 5, 1, 5, 1, 1, 1, 1)
INIT(WHOLEX ,TEM1,-100. ,0. )
PATCH(WHOLEY ,LINVLY, 1, 5, 1, 5, 1, 1, 1, 1)
INIT(WHOLEY ,TEM1,-100. ,0. )
INIADD = T
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(IN1 ,SOUTH , 1, 5, 1, 1, 1, 1, 1, 1)
COVAL(IN1 ,P1 , FIXFLU ,0.5 )
COVAL(IN1 ,U1 ,0. ,0. )
COVAL(IN1 ,V1 ,0. ,0.5 )
COVAL(IN1 ,C1 ,0. ,0. )
COVAL(IN1 ,C2 ,0. ,0. )
PATCH(OUT1 ,NORTH , 1, 5, 5, 5, 1, 1, 1, 1)
COVAL(OUT1 ,P1 ,1000. ,0. )
COVAL(OUT1 ,U1 ,0. ,0. )
COVAL(OUT1 ,V1 ,0. ,0. )
COVAL(OUT1 ,C1 ,0. , SAME )
COVAL(OUT1 ,C2 ,0. , SAME )
PATCH(H2SO ,CELL , 1, 5, 5, 5, 1, 1, 1, 1)
COVAL(H2SO ,C1 , FIXFLU ,2.0E-03 )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 80 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(U1)=10
LITER(V1)=10 ;LITER(C1)=20
LITER(C2)=20
ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
ENDIT(V1)=1.0E-03 ;ENDIT(C1)=1.0E-03
ENDIT(C2)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,1.)
RELAX(U1,FALSDT,1.)
RELAX(V1,FALSDT,1.)
RELAX(C1,FALSDT,1.0E+09)
RELAX(C2,FALSDT,1.0E+09)
RELAX(ELH,LINRLX,1.)
RELAX(TEM1,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(C1)=1.0E+10 ;VARMIN(C1)=-1.0E+10
VARMAX(C2)=1.0E+10 ;VARMIN(C2)=-1.0E+10
VARMAX(ELH)=1.0E+10 ;VARMIN(ELH)=-1.0E+10
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
CHMKIN = T
ISG62 = 1
CHSOC =1.
CSG4 ='tdif'
SPEDAT(SET,GXMONI,PLOTALL,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = T ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(U1,Y,N,Y,Y,Y,Y)
OUTPUT(V1,Y,N,Y,Y,Y,Y)
OUTPUT(C1,Y,N,Y,Y,Y,Y)
OUTPUT(C2,Y,N,Y,Y,Y,Y)
OUTPUT(ELH,Y,N,Y,N,N,N)
OUTPUT(TEM1,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 3 ;IYMON = 3 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = 1 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP