TALK=T;RUN(1,1)
photon use
ext
p0
x0
msg the starting grid
gr y m
gr z 1
gr z m
vec z 1 sh
vec z 2 sh
vec z 3 sh
vec z 4 sh
vec z 5 sh
vec z 6 sh
msg press RETURN to continue
pause
ext
p2
x2
msg the end of the second time step
gr y m
gr z 1
gr z m
vec z 1 sh
vec z 2 sh
vec z 3 sh
vec z 4 sh
vec z 5 sh
vec z 6 sh
msg press RETURN to continue
pause
ext
p5
x5
gr y m
msg the end of the fifth time step
gr z 1
gr z m
vec z 1 m sh
red
msg press RETURN to continue
pause;vec off
view z
msg w1 contours near outlet
con w1 z 5 fi;0.001
pause;con off
msg the view from the side
view x
pause
msg pressure contours and vectors
con p1 ix 4 fi;0.001
con p1 ix 10 fi;0.001
vec x ix 4;vec ix 10
ENDUSE
DISPLAY
Coding in GXBFGR is accessed, and caused to create a cylindrical
grid, which may be distorted at the start, and during time, in
various ways.
Fluid within it can be squeezed out; or fluid can be sucked in
from the outside, according to the parameter settings.
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(cylinder with grid distortion :B967 )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 5
************************************************************
Group 2. Time dependence
STEADY = F
* Set overall time and no. of steps
TFIRST =0. ;TLAST =10.
FSTEP = 1 ;LSTEP = 5
TFRAC(1)=0.2 ;TFRAC(2)=0.4
TFRAC(3)=0.6 ;TFRAC(4)=0.8
TFRAC(5)=1.
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 12
XULAST =1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 6
YVLAST =1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 6
ZWLAST =1.
************************************************************
Group 6. Body-Fitted Coordinates
BFC = T ;NONORT = F
NCRT = -1
RSTGEO = F ;SAVGEO = F
UUP = F ;VUP = F ;WUP = F
NGEOM =CHAM
NAMXYZ =CHAM
MOVBFC = T
SETBFC = T
ANGMIN =20.
DOMAIN( 1, 13, 1, 7, 1, 7)
* Set fixed sub-domain
FIXDOM( 1, 0, 0, 0, 0, 0, 0)
FIXDOM( 2, 0, 0, 0, 0, 0, 0)
FIXDOM( 3, 0, 0, 0, 0, 0, 0)
FIXDOM( 4, 0, 0, 0, 0, 0, 0)
FIXDOM( 5, 0, 0, 0, 0, 0, 0)
FIXDOM( 6, 0, 0, 0, 0, 0, 0)
FIXDOM( 7, 0, 0, 0, 0, 0, 0)
FIXDOM( 8, 0, 0, 0, 0, 0, 0)
FIXDOM( 9, 0, 0, 0, 0, 0, 0)
FIXDOM( 10, 0, 0, 0, 0, 0, 0)
LIJ = F ;LJK = T ;LIK = F
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(3)=U1
NAME(5)=V1 ;NAME(7)=W1
NAME(144)=WCRT ;NAME(145)=VCRT
NAME(146)=UCRT ;NAME(147)=VOLU
NAME(148)=CONK ;NAME(149)=CONJ
NAME(150)=CONI
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,Y,N,N,Y)
SOLUTN(U1,Y,Y,Y,N,N,Y)
SOLUTN(V1,Y,Y,Y,N,N,Y)
SOLUTN(W1,Y,Y,Y,N,N,Y)
SOLUTN(WCRT,Y,N,N,N,N,N)
SOLUTN(VCRT,Y,N,N,N,N,N)
SOLUTN(UCRT,Y,N,N,N,N,N)
SOLUTN(VOLU,Y,N,N,N,N,Y)
SOLUTN(CONK,Y,N,N,N,N,Y)
SOLUTN(CONJ,Y,N,N,N,N,Y)
SOLUTN(CONI,Y,N,N,N,N,Y)
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(U1,Y,Y,Y,Y,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
NEWRH1 = T
UCONV = T
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 = GRND3 ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =1.0E+05
DVO1DT =0. ;DRH1DP = GRND3
RHO1A =1.0E-05 ;RHO1B =1. ;RHO1C =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1. ;ENUT =0.
PRNDTL(U1)=1. ;PRNDTL(V1)=1.
PRNDTL(W1)=1.
PRT(U1)=1. ;PRT(V1)=1.
PRT(W1)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=0. ;FIINIT(U1)=0.
FIINIT(V1)=0. ;FIINIT(W1)=0.
FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=1.0E-10
FIINIT(UCRT)=1.0E-10 ;FIINIT(VOLU)=1.0E-10
FIINIT(CONK)=0. ;FIINIT(CONJ)=0.
FIINIT(CONI)=0.
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(EXIT ,HIGH , 1, 12, 1, 3, 6, 6, 1, 5)
COVAL(EXIT ,P1 ,0.1 ,0. )
PATCH(INWALL ,SWALL , 1, 12, 1, 1, 1, 6, 1, 5)
COVAL(INWALL ,W1 ,1. ,0. )
PATCH(OUTWALL ,NWALL , 1, 12, 6, 6, 1, 6, 1, 5)
COVAL(OUTWALL ,W1 ,1. ,0. )
XCYCLE = T
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 20 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(U1)=10
LITER(V1)=10 ;LITER(W1)=10
ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,0.5)
RELAX(U1,FALSDT,0.1)
RELAX(V1,FALSDT,0.1)
RELAX(W1,FALSDT,0.1)
RELAX(WCRT,LINRLX,1.)
RELAX(VCRT,LINRLX,1.)
RELAX(UCRT,LINRLX,1.)
RELAX(VOLU,LINRLX,1.)
RELAX(CONK,LINRLX,1.)
RELAX(CONJ,LINRLX,1.)
RELAX(CONI,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
VARMAX(VOLU)=1.0E+10 ;VARMIN(VOLU)=-1.0E+10
VARMAX(CONK)=1.0E+10 ;VARMIN(CONK)=-1.0E+10
VARMAX(CONJ)=1.0E+10 ;VARMIN(CONJ)=-1.0E+10
VARMAX(CONI)=1.0E+10 ;VARMIN(CONI)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,GRIDS,CASE,C,CYLINDER)
SPEDAT(SET,GRIDS,RADIN0,R,0.)
SPEDAT(SET,GRIDS,RADOUT,R,0.05)
SPEDAT(SET,GRIDS,ZLENGT,R,0.1)
SPEDAT(SET,GRIDS,XAXFAC,R,1.)
SPEDAT(SET,GRIDS,YAXFAC,R,1.)
SPEDAT(SET,GRIDS,ZPOWER,R,0.)
SPEDAT(SET,GRIDS,TMFCRI,R,1.)
SPEDAT(SET,GRIDS,TMFCRO,R,0.95)
SPEDAT(SET,GRIDS,TMFCZL,R,0.8)
SPEDAT(SET,GRIDS,TMFCXF,R,1.)
SPEDAT(SET,GRIDS,TMFCYZ,R,1.)
SPEDAT(SET,GRIDS,TMFCZP,R,1.)
SPEDAT(SET,GRIDS,ECCFAC,R,0.)
SPEDAT(SET,GRIDS,DRDZ,R,0.)
SPEDAT(SET,GRIDS,GAPFAC,R,0.)
SPEDAT(SET,GXMONI,TRANSIENT,L,F)
SPEDAT(SET,GXMONI,PLOTALL,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,Y,Y,Y,Y,Y)
OUTPUT(U1,Y,Y,Y,Y,Y,Y)
OUTPUT(V1,Y,Y,Y,Y,Y,Y)
OUTPUT(W1,Y,Y,Y,Y,Y,Y)
OUTPUT(WCRT,Y,N,Y,N,N,N)
OUTPUT(VCRT,Y,N,Y,N,N,N)
OUTPUT(UCRT,Y,N,Y,N,N,N)
OUTPUT(VOLU,Y,N,Y,N,N,N)
OUTPUT(CONK,Y,N,Y,N,N,N)
OUTPUT(CONJ,Y,N,Y,N,N,N)
OUTPUT(CONI,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 6 ;IYMON = 3 ;IZMON = 3
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 1 ;NUMCLS = 5
NTPRIN = 1 ;ISTPRF = 1 ;ISTPRL = 100000
NXPRIN = 6 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = T ;YZPR = F
IPLTF = 3 ;IPLTL = -1 ;NPLT = 1
ISWPRF = 17 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
IDISPA = 1 ;IDISPB = 1 ;IDISPC = 5
CSG1 ='PHI'
CSG2 ='XYZ'
STOP