TALK=T;RUN(1,1)
display
*
This example Q1 demonstrates the use of 'Set internal
points of a blok' option for BFC-type grid. This option
is used to perform a three-dimensional interpolation
for the internal grid coordinates of a sub-domain; it
is used in three-dimensional cases when internal
points of a certain shape need smoothing; that
shape is then declared as a sub-domain over which
trans-finite or Laplace solver is used to perform
interpolation.
In this example 'Set internal points of a block'
option is used to distribute grid within a cube
that has been deformed by a half-cylinder.
*
Set the grid type to BFC
*
Enter cylinder diameter (default 0.5m)
Enter length of cube side (default 1.0m)
Input data used in this example:
*
-- Create half-cylinder --
Define points A,B,C and D
*
Draw two arc lines(AB & CD) and two straight
lines (BC & DA) to create a half-cylinder.
Lines AB&CD must have equal number of cells, as
well as lines BC&DA.
Enter number of cells for AB(&CD) lines (default 10)
Enter power distribution (for symmetric power-law
precede the number with S. (default 1.0)
Enter number of cells for BC(&DA) lines (default 10)
Enter power distribution (for symmetric power-law
precede the number with S. (default 1.0)
GSET(L,BC,B,C,nbc,pwr2)
Arc CD (C-D) goes through point
GSET(L,CD,C,D,nab,pwr1,ARC,side,
*
Define frame ABCD (half-cylinder) which has corner points
A,B,C,D
*
Enter number of cells for J direction (default 10)
Set the BFC grid dimension as nx x ny x nz cells with
cube dimensions (reference length) side x side x side.
*
Match grid plane J1 on frame ABCD using the
trans-finite method
*
Cube grid lines now pass through the cylinder. In
order to fit the grid to the new shape, the whole
domain is defined as 'sub-domain block' over which
Laplace solver is used to make internal grid
as orthogonal as possible.
enddis
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(SUB-DOMAIN_SMOOTHINGB542 )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 1
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 10
XULAST =1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 1
YVLAST =1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 14
ZWLAST =1.
************************************************************
Group 6. Body-Fitted Coordinates
BFC = T ;NONORT = F
NCRT = -1
RSTGEO = F ;SAVGEO = F
UUP = F ;VUP = F ;WUP = F
NGEOM =CHAM
NAMXYZ =CHAM
ANGMIN =20.
DOMAIN( 1, 11, 1, 2, 1, 15)
* Set fixed sub-domain
FIXDOM( 1, 0, 0, 0, 0, 0, 0)
FIXDOM( 2, 0, 0, 0, 0, 0, 0)
FIXDOM( 3, 0, 0, 0, 0, 0, 0)
FIXDOM( 4, 0, 0, 0, 0, 0, 0)
FIXDOM( 5, 0, 0, 0, 0, 0, 0)
FIXDOM( 6, 0, 0, 0, 0, 0, 0)
FIXDOM( 7, 0, 0, 0, 0, 0, 0)
FIXDOM( 8, 0, 0, 0, 0, 0, 0)
FIXDOM( 9, 0, 0, 0, 0, 0, 0)
FIXDOM( 10, 0, 0, 0, 0, 0, 0)
MSWP = 15
LIJ = F ;LJK = T ;LIK = F
SLIDW = T ;SLIDE = T
SLIDL = T ;SLIDH = T
IMON = 5 ;JMON = 1 ;KMON = 1
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1.0E-05 ;ENUT =0.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
No PATCHes yet used for this Group
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 1 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
************************************************************
Group 17. Relaxation
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,GXMONI,PLOTALL,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 1 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = 1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP