Flow in a Stylised Intake Duct
Mesh generation by ICEM-CFD: Geometry
shown in PHOTON
Set-up in VR-Editor: Geometry shown in
VR-Editor
- Inlet conditions: Inlet 1m/s at 10 deg C
- Outlet condition: Pressure fixed to atmospheric.
- Outer walls: Surface temperature 20 deg C
- Walls of 'hole' for valve stem: Fixed heat flux, 50 W/m2
- Fluid: Air at 20 deg C
- Turbulence: Laminar
- GCV multi-block, 24 blocks
- Convergence history
Results viewed in VR-Viewer: Velocity
vectors, Velocity contours,
Streamlines
