TALK=T;RUN(1,1)
  PHOTON USE
  ext



  view 1 2 3
  msg Temperature contours
  con tem1 z m fi;0.001
  con tem1 y m fi;0.001
  con tem1 x m fi;0.001
  gr x m;gr y m;gr z m
  msg Note contact resistance between upper and lower regions
  msg impeding heat flow from top towards the bottom.
  msg Press e to END
  enduse
  DISPLAY

  Library Q1 file (case 100) has been slightly  modified to
  exemplify the use of the "contact-resistance" feature, which
  permits the simulation of thin (sub-grid-scale) sheets of
  material which conducts heat poorly.

  The high-south-east corner of the cube has TEMP=0.0; there is a
  patch heated to TEMP=100.0 on the north face of the cube; and
  the contact resistance stretches across the cube between iyres
  and iyres+1 .

  enddis
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Contact Resistance To Heat Condctn      )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 10
 XULAST =1.
 XFRAC(1)=0.1 ;XFRAC(3)=0.3
 XFRAC(5)=0.5 ;XFRAC(7)=0.7
 XFRAC(9)=0.9
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 10
 YVLAST =1.
 YFRAC(1)=0.1 ;YFRAC(3)=0.3
 YFRAC(5)=0.5 ;YFRAC(7)=0.7
 YFRAC(9)=0.9
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 10
 ZWLAST =1.
 ZFRAC(1)=0.1 ;ZFRAC(3)=0.3
 ZFRAC(5)=0.5 ;ZFRAC(7)=0.7
 ZFRAC(9)=0.9
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(150)=TEM1
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(TEM1,Y,Y,Y,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(TEM1,N,N,Y,N,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = 1 ;ISOLY = 1 ;ISOLZ = 1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(TEM1)=-1.
 PRT(TEM1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(TEM1)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(GP12DFN ,NORTH , 1, 10, 5, 5, 1, 10, 1, 1)
 COVAL(GP12DFN ,TEM1,1. ,1000. )
 
 PATCH(COLD ,SWALL , 10, 10, 1, 1, 10, 10, 1, 1)
 COVAL(COLD ,TEM1,1. ,0. )
 
 PATCH(HEATER ,NWALL , 3, 4, 10, 10, 3, 4, 1, 1)
 COVAL(HEATER ,TEM1,1. ,100. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 3 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(TEM1)=-100
 ENDIT(TEM1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(TEM1,FALSDT,1.0E+09)
 OVRRLX =1.7
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(TEM1,Y,Y,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 6 ;IYMON = 6 ;IZMON = 6
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = 1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = 2 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = 2 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = 2 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 2 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP