TALK=T;RUN(1,1)
DISPLAY
/------------------------------\
/XXXXXXXX/-----------------\XXXXXXX\
/XXXXXXXX/ \XXXXXXX\
/XXXXXXXX/ /---------------\ \XXXXXXX\
/XXXXXXXX/ /XXXXXXX-----XXXXXXX\ \XXXXXXX\
/XXXXXXXX/ /XXXXXXX/ \XXXXXXX\ \XXXXXXX\
/XXXXXXXX/ /XXXXXXX/ \XXXXXXX\ \XXXXXXX\
/XXXXXXXX/ /XXXXXXX/ \XXXXXXX\ \XXXXXXX\
!XXXXXXX! !XXXXXXX! !XXXXXXX! !XXXXXXX!
!XXXXXXX! !XXXXXXX! !XXXXXXX! !XXXXXXX!
!XXXXXX/ \XXXXXX! !XXXXXX/ \XXXXXX!
!XXXX/ \XXXX! !XXXX/ \XXXX!
!XX/ First \XX! !XX/ Second \XX!
!X! sphere !X! !X! sphere !X!
!X! INFOB_1 !X! !X! INFOB_2 !X!
!XX\ /XX! !XX\ /XX!
!XXXX\ /XXXX! !XXXX\ /XXXX!
!XXXXXX\ /XXXXXX! !XXXXXX\ /XXXXXX!
!XXXXXXX! !XXXXXXX! !XXXXXXX! !XXXXXXX!
!XXXXXXX! !XXXXXXX! !XXXXXXX! !XXXXXXX!
The task is a 3D steady flow into BFC geometry.
This example illustrate a creation complex duct
by means drilling of In-Form object.
At first a wide bent channel is created by means of BFC.
The narrow channel is created from it by blocking any cells.
Then two In-Form objects are described as spheres inside
a wide channel. Inside each sphere set PRPS=0.
The Q1 uses the In-Form functions:
INITIAL, INFOB and SPHERE.
The Q1 contains PHOTON USE commands
ENDDIS
PHOTON USE
P
up z
set prop off
surf prps z 197.9
surf prps y 197.9
surf prps x 197.9
msg Press to continue
pause
vi x
ve x 1 sh
ve x 10 sh
ENDUSE
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(TWO VESSELS BY IN-FORM )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 787
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 21
XULAST =6.2832
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 10
YVLAST =0.3
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 42
ZWLAST =2.7
************************************************************
Group 6. Body-Fitted Coordinates
BFC = T ;NONORT = T
NCRT = -1
RSTGEO = F ;SAVGEO = F
UUP = F ;VUP = F ;WUP = F
NGEOM =CHAM
NAMXYZ =CHAM
ANGMIN =20.
DOMAIN( 1, 22, 1, 11, 1, 43)
* Set fixed sub-domain
FIXDOM( 1, 0, 0, 0, 0, 0, 0)
FIXDOM( 2, 0, 0, 0, 0, 0, 0)
FIXDOM( 3, 0, 0, 0, 0, 0, 0)
FIXDOM( 4, 0, 0, 0, 0, 0, 0)
FIXDOM( 5, 0, 0, 0, 0, 0, 0)
FIXDOM( 6, 0, 0, 0, 0, 0, 0)
FIXDOM( 7, 0, 0, 0, 0, 0, 0)
FIXDOM( 8, 0, 0, 0, 0, 0, 0)
FIXDOM( 9, 0, 0, 0, 0, 0, 0)
FIXDOM( 10, 0, 0, 0, 0, 0, 0)
LIJ = F ;LJK = T ;LIK = F
* X-cyclic boundaries switched
XCYIZ( 1, T ) ; XCYIZ( 2, T ) ; XCYIZ( 3, T )
XCYIZ( 4, T ) ; XCYIZ( 5, T ) ; XCYIZ( 6, T )
XCYIZ( 7, T ) ; XCYIZ( 8, T ) ; XCYIZ( 9, T )
XCYIZ( 10, T ) ; XCYIZ( 11, T ) ; XCYIZ( 12, T )
XCYIZ( 13, T ) ; XCYIZ( 14, T ) ; XCYIZ( 15, T )
XCYIZ( 16, T ) ; XCYIZ( 17, T ) ; XCYIZ( 18, T )
XCYIZ( 19, T ) ; XCYIZ( 20, T ) ; XCYIZ( 21, T )
XCYIZ( 22, T ) ; XCYIZ( 23, T ) ; XCYIZ( 24, T )
XCYIZ( 25, T ) ; XCYIZ( 26, T ) ; XCYIZ( 27, T )
XCYIZ( 28, T ) ; XCYIZ( 29, T ) ; XCYIZ( 30, T )
XCYIZ( 31, T ) ; XCYIZ( 32, T ) ; XCYIZ( 33, T )
XCYIZ( 34, T ) ; XCYIZ( 35, T ) ; XCYIZ( 36, T )
XCYIZ( 37, T ) ; XCYIZ( 38, T ) ; XCYIZ( 39, T )
XCYIZ( 40, T ) ; XCYIZ( 41, T ) ; XCYIZ( 42, T )
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(3)=U1
NAME(5)=V1 ;NAME(7)=W1
NAME(147)=PRPS ;NAME(148)=WCRT
NAME(149)=VCRT ;NAME(150)=UCRT
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,Y,N,Y,Y)
SOLUTN(U1,Y,Y,Y,N,Y,Y)
SOLUTN(V1,Y,Y,Y,N,Y,Y)
SOLUTN(W1,Y,Y,Y,N,Y,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(WCRT,Y,N,N,N,N,N)
SOLUTN(VCRT,Y,N,N,N,N,N)
SOLUTN(UCRT,Y,N,N,N,N,N)
PRPS = 147
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(U1,Y,Y,Y,Y,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =0.1 ;ENUT =0.
PRNDTL(U1)=1. ;PRNDTL(V1)=1.
PRNDTL(W1)=1.
PRT(U1)=1. ;PRT(V1)=1.
PRT(W1)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
FIINIT(V1)=1.0E-10 ;FIINIT(W1)=1.
FIINIT(PRPS)=0. ;FIINIT(WCRT)=1.0E-10
FIINIT(VCRT)=1.0E-10 ;FIINIT(UCRT)=1.0E-10
PATCH(INIT1 ,INIVAL, 1, 21, 4, 10, 1, 42, 1, 1)
INIT(INIT1 ,PRPS,0. ,198. )
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(PATCH1 ,CELL , 1, 21, 1, 10, 1, 14, 1, 1)
PATCH(PATCH2 ,CELL , 1, 21, 1, 10, 25, 42, 1, 1)
PATCH(INLET ,LOW , 1, 21, 1, 10, 1, 1, 1, 1)
COVAL(INLET ,P1 , FIXFLU ,1. )
COVAL(INLET ,U1 ,0. ,0. )
COVAL(INLET ,V1 ,0. ,0. )
COVAL(INLET ,W1 ,0. ,1. )
PATCH(OUTLET ,HIGH , 1, 21, 1, 10, 42, 42, 1, 1)
COVAL(OUTLET ,P1 ,1. ,0. )
XCYCLE = T
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 1000 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
LITER(P1)=2 ;LITER(U1)=10
LITER(V1)=10 ;LITER(W1)=10
ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,0.2)
RELAX(U1,FALSDT,0.1)
RELAX(V1,FALSDT,0.1)
RELAX(W1,FALSDT,0.1)
RELAX(PRPS,LINRLX,1.)
RELAX(WCRT,LINRLX,1.)
RELAX(VCRT,LINRLX,1.)
RELAX(UCRT,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,INFOB,*!PATCH1,C,=SPHERE(0.&0.&0.4&0.3&0&0&0)!INFOB_1)
SPEDAT(SET,INFOB,*!PATCH2,C,=SPHERE(0.&0.6366&0.&0.3&0&0&0)!INFOB_2)
SPEDAT(SET,INITIAL,PRPS!PATCH1,C,=0.!INFOB_1)
SPEDAT(SET,INITIAL,PRPS!PATCH2,C,=0.!INFOB_2)
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,MATERIAL,0,L,T)
SPEDAT(SET,MATERIAL,198,L,T)
************************************************************
Group 20. Preliminary Printout
DISTIL = T ;NULLPR = F
NDST = 0
DSTTOL =1.0E-02
EX(P1)=0.6536 ;EX(U1)=0.02435
EX(V1)=0.01798 ;EX(W1)=0.2609
EX(PRPS)=91.459999 ;EX(WCRT)=0.2403
EX(VCRT)=0.04242 ;EX(UCRT)=0.01869
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(U1,Y,N,Y,Y,Y,Y)
OUTPUT(V1,Y,N,Y,Y,Y,Y)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(WCRT,Y,N,Y,N,N,N)
OUTPUT(VCRT,Y,N,Y,N,N,N)
OUTPUT(UCRT,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 2 ;IZMON = 21
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP