TALK=T;RUN(1,1)
PHOTON USE
p
up 1 0 0;vi 0.5 1 0.75
gr ou x 1;gr ou y 1;gr ou z 1
gr ou x m;gr ou y m;gr ou z m
gr ou x 1 y 1 2 z 2 2 col 2
gr ou x 6 y 1 2 z 7 7 col 2
gr ou z 4 x 1 4 y 1 3 col 6
gr ou z 6 x 2 5 y 1 3 col 6
ve y 2 sh
msg 3D SHELL-AND-TUBE HEAT EXCHANGER
msg --------------------------------
msg Velocity 1 phase:
msg Press Enter to continue
pause;vi 0 1 0
msg 3D SHELL-AND-TUBE HEAT EXCHANGER
msg --------------------------------
msg Temperature distribution 1 phase:
con 1sth y 2 sh;in 50
msg Press Enter to continue
pause
con off;red
msg 3D SHELL-AND-TUBE HEAT EXCHANGER
msg --------------------------------
msg Temperature distribution 2 phase:
con 2ndh y 2 sh;in 50
msg Press e to END
ENDUSE
DISPLAY
The heat exchanger considered has two baffles within
the shell and the tubes arranged if five passes.
The overall heat transfer coefficient depends on the
local velocity and the resistance to flow exerted by
tubes depends on the flow direction, on the local
velocities and Reynolds numbers. They are introduced
by PLANT.
ENDDIS
PLANTBEGIN
Heat-exchange with tube fluid, throughout the exchanger.
PATCH(HEX,VOLUME,1,NX,1,NY,1,NZ,1,1000)
CO=0.2*(U1**2+V1**2+W1**2)**0.25
VAL=2NDH
COVAL(HEX,1STH,GRND,GRND)
Heat-exchange with shell fluid, throughout the exchanger.
CO=0.2*(U1**2+W1**2+V1**2)**0.25
VAL=1STH
COVAL(HEX,2NDH,GRND,GRND)
Resistance to flow exerted by tubes, throughout the shell.
PATCH(RESIST,PHASEM,1,NX,1,NY,1,NZ,1,1000)
VAL=-0.01*(U1**2+W1**2+V1**2)**1.85
COVAL(RESIST,U1,FIXFLU,GRND)
VAL=-0.01*(U1**2+W1**2+V1**2)**1.85
COVAL(RESIST,V1,FIXFLU,GRND)
CO=0.02*(U1**2+W1**2+V1**2)**0.8
COVAL(RESIST,W1,GRND,0.0)
PLANTEND
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(In-Form equivalent of PLANT case Z135 )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 735
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 5
XULAST =1.
XFRAC(1)=0.2 ;XFRAC(2)=0.4
XFRAC(3)=0.6 ;XFRAC(4)=0.8
XFRAC(5)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 3
YVLAST =0.5
YFRAC(1)=0.333333 ;YFRAC(2)=0.666667
YFRAC(3)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 8
ZWLAST =4.
ZFRAC(1)=0.125 ;ZFRAC(2)=0.25
ZFRAC(3)=0.375 ;ZFRAC(4)=0.5
ZFRAC(5)=0.625 ;ZFRAC(6)=0.75
ZFRAC(7)=0.875 ;ZFRAC(8)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(3)=U1
NAME(5)=V1 ;NAME(7)=W1
NAME(14)=1STH ;NAME(15)=2NDH
NAME(148)=HPOR ;NAME(149)=NPOR
NAME(150)=EPOR
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,N,N,N,Y)
SOLUTN(U1,Y,Y,N,N,N,Y)
SOLUTN(V1,Y,Y,N,N,N,Y)
SOLUTN(W1,Y,Y,N,N,N,Y)
SOLUTN(1STH,Y,Y,N,N,N,Y)
SOLUTN(2NDH,Y,Y,N,N,N,Y)
SOLUTN(HPOR,Y,N,N,N,N,Y)
SOLUTN(NPOR,Y,N,N,N,N,Y)
SOLUTN(EPOR,Y,N,N,N,N,Y)
EPOR = 150 ;HPOR = 148 ;NPOR = 149 ;VPOR = 0
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(U1,Y,Y,N,Y,Y,Y)
TERMS(V1,Y,Y,N,Y,Y,Y)
TERMS(W1,Y,Y,N,Y,Y,Y)
TERMS(1STH,N,Y,N,Y,Y,Y)
TERMS(2NDH,N,N,N,Y,N,N)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1.0E-05 ;ENUT =0.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(U1)=0.
FIINIT(V1)=0. ;FIINIT(W1)=0.1
FIINIT(1STH)=1. ;FIINIT(2NDH)=0.
FIINIT(HPOR)=0.5 ;FIINIT(NPOR)=0.5
FIINIT(EPOR)=0.5
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(INLET1 ,CELL , 1, 1, 2, 3, 2, 2, 1, 1000)
COVAL(INLET1 ,P1 , FIXFLU ,0.05 )
COVAL(INLET1 ,1STH,0. ,1. )
COVAL(INLET1 ,2NDH,0. , SAME )
PATCH(OUTLET1 ,EAST , 5, 5, 2, 3, 7, 7, 1, 1000)
COVAL(OUTLET1 ,P1 ,1. ,0. )
PATCH(INLET2 ,CELL , 1, 1, 1, 3, 8, 8, 1, 1000)
COVAL(INLET2 ,2NDH,0.033333 ,0. )
PATCH(BAFFLE1 ,HIGH , 1, 4, 1, 3, 3, 3, 1, 1000)
COVAL(BAFFLE1 ,W1 , FIXVAL ,0. )
PATCH(BAFFLE2 ,HIGH , 2, 5, 1, 3, 5, 5, 1, 1000)
COVAL(BAFFLE2 ,W1 , FIXVAL ,0. )
PATCH(INEH1 ,CELL , 1, 1, 1, 3, 1, 7, 1, 1000)
COVAL(INEH1 ,2NDH,In-Form:source - see Grp 19)
PATCH(INEW1 ,CELL , 2, 2, 1, 3, 1, 1, 1, 1000)
COVAL(INEW1 ,2NDH,In-Form:source - see Grp 19)
PATCH(INEL1 ,CELL , 2, 2, 1, 3, 2, 8, 1, 1000)
COVAL(INEL1 ,2NDH,In-Form:source - see Grp 19)
PATCH(INEW2 ,CELL , 3, 3, 1, 3, 8, 8, 1, 1000)
COVAL(INEW2 ,2NDH,In-Form:source - see Grp 19)
PATCH(INEH2 ,CELL , 3, 3, 1, 3, 1, 7, 1, 1000)
COVAL(INEH2 ,2NDH,In-Form:source - see Grp 19)
PATCH(INEW3 ,CELL , 4, 4, 1, 3, 1, 1, 1, 1000)
COVAL(INEW3 ,2NDH,In-Form:source - see Grp 19)
PATCH(INEL2 ,CELL , 4, 4, 1, 3, 2, 8, 1, 1000)
COVAL(INEL2 ,2NDH,In-Form:source - see Grp 19)
PATCH(INEW4 ,CELL , 5, 5, 1, 3, 8, 8, 1, 1000)
COVAL(INEW4 ,2NDH,In-Form:source - see Grp 19)
PATCH(INEH3 ,CELL , 5, 5, 1, 3, 1, 7, 1, 1000)
COVAL(INEH3 ,2NDH,In-Form:source - see Grp 19)
PATCH(IHEX ,VOLUME, 1, 5, 1, 3, 1, 8, 1, 1000)
COVAL(IHEX ,1STH,In-Form:source - see Grp 19)
COVAL(IHEX ,2NDH,In-Form:source - see Grp 19)
PATCH(IRESIST ,PHASEM, 1, 5, 1, 3, 1, 8, 1, 1000)
COVAL(IRESIST ,U1 ,In-Form:source - see Grp 19)
COVAL(IRESIST ,V1 ,In-Form:source - see Grp 19)
COVAL(IRESIST ,W1 ,In-Form:source - see Grp 19)
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 270 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
LITER(P1)=10 ;LITER(U1)=10
LITER(V1)=10 ;LITER(W1)=10
LITER(1STH)=20 ;LITER(2NDH)=20
ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
ENDIT(1STH)=1.0E-03 ;ENDIT(2NDH)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,1.)
RELAX(U1,FALSDT,1.)
RELAX(V1,FALSDT,1.)
RELAX(W1,FALSDT,1.)
RELAX(1STH,FALSDT,100.)
RELAX(2NDH,FALSDT,100.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(1STH)=1.0E+10 ;VARMIN(1STH)=-1.0E+10
VARMAX(2NDH)=1.0E+10 ;VARMIN(2NDH)=-1.0E+10
VARMAX(HPOR)=1.0E+10 ;VARMIN(HPOR)=-1.0E+10
VARMAX(NPOR)=1.0E+10 ;VARMIN(NPOR)=-1.0E+10
VARMAX(EPOR)=1.0E+10 ;VARMIN(EPOR)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,SOURCE,2NDH!INEH1,C,=0.033333*(2NDH[&&+1]-2NDH)!LINE)
SPEDAT(SET,SOURCE,2NDH!INEW1,C,=0.033333*(2NDH[-1]-2NDH)!LINE)
SPEDAT(SET,SOURCE,2NDH!INEL1,C,=0.033333*(2NDH[&&-1]-2NDH)!LINE)
SPEDAT(SET,SOURCE,2NDH!INEW2,C,=0.033333*(2NDH[-1]-2NDH)!LINE)
SPEDAT(SET,SOURCE,2NDH!INEH2,C,=0.033333*(2NDH[&&+1]-2NDH)!LINE)
SPEDAT(SET,SOURCE,2NDH!INEW3,C,=0.033333*(2NDH[-1]-2NDH)!LINE)
SPEDAT(SET,SOURCE,2NDH!INEL2,C,=0.033333*(2NDH[&&-1]-2NDH)!LINE)
SPEDAT(SET,SOURCE,2NDH!INEW4,C,=0.033333*(2NDH[-1]-2NDH)!LINE)
SPEDAT(SET,SOURCE,2NDH!INEH3,C,=0.033333*(2NDH[&&+1]-2NDH)!LINE)
SPEDAT(SET,SOURCE,1STH!IHEX,C,=0.2*(U1^2+V1^2+W1^2)^0.25*(2NDH-1S$)
SPEDAT(SET,SOURCE,1STH!IHEX,C,TH)!LINE)
SPEDAT(SET,SOURCE,2NDH!IHEX,C,=0.2*(U1^2+V1^2+W1^2)^0.25*(1STH-2N$)
SPEDAT(SET,SOURCE,2NDH!IHEX,C,DH)!LINE)
SPEDAT(SET,SOURCE,U1!IRESIST,C,=-0.01*(U1^2+W1^2+V1^2)^1.85)
SPEDAT(SET,SOURCE,V1!IRESIST,C,=-0.01*(U1^2+W1^2+V1^2)^1.85)
SPEDAT(SET,SOURCE,W1!IRESIST,C,=-0.02*(U1^2+W1^2+V1^2)^0.8)
SPEDAT(SET,GXMONI,PLOTALL,L,T)
************************************************************
Group 20. Preliminary Printout
DISTIL = T ;NULLPR = F
NDST = 0
DSTTOL =1.0E-02
EX(P1)=5.331 ;EX(U1)=0.408
EX(V1)=0.05109 ;EX(W1)=0.5345
EX(1STH)=0.5924 ;EX(2NDH)=0.4087
EX(HPOR)=0.5 ;EX(NPOR)=0.5
EX(EPOR)=0.5
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(U1,Y,N,Y,Y,Y,Y)
OUTPUT(V1,Y,N,Y,Y,Y,Y)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(1STH,Y,N,Y,Y,Y,Y)
OUTPUT(2NDH,Y,N,Y,Y,Y,Y)
OUTPUT(HPOR,N,N,N,N,N,N)
OUTPUT(NPOR,N,N,N,N,N,N)
OUTPUT(EPOR,N,N,N,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 6 ;IYMON = 6 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = T ;YZPR = F
IPLTF = 1 ;IPLTL = 270 ;NPLT = 1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
PATCH(PASS1 ,PROFIL, 1, 1, 2, 2, 1, 8, 1, 1000)
PLOT(PASS1 ,1STH,0. ,1. )
PLOT(PASS1 ,2NDH,0. ,1. )
PATCH(PASS2 ,PROFIL, 2, 2, 2, 2, 1, 8, 1, 1000)
PLOT(PASS2 ,1STH,0. ,1. )
PLOT(PASS2 ,2NDH,0. ,1. )
PATCH(PASS3 ,PROFIL, 3, 3, 2, 2, 1, 8, 1, 1000)
PLOT(PASS3 ,1STH,0. ,1. )
PLOT(PASS3 ,2NDH,0. ,1. )
PATCH(PASS4 ,PROFIL, 4, 4, 2, 2, 1, 8, 1, 1000)
PLOT(PASS4 ,1STH,0. ,1. )
PLOT(PASS4 ,2NDH,0. ,1. )
PATCH(PASS5 ,PROFIL, 5, 5, 2, 2, 1, 8, 1, 1000)
PLOT(PASS5 ,1STH,0. ,1. )
PLOT(PASS5 ,2NDH,0. ,1. )
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP