TALK=T;RUN(1,1)
  PHOTON USE
  p;;;;

  set vec ref 0.3;gr z 1;vec z 1 sh
  msg                     Velocity vectors
  msg Press  to continue
  pause;gr off;vec off;red;gr ou z 1
  msg Temperature contours
  con TEMP z 1 fil;.001
  msg Press Enter to continue
  pause;con off;red
  msg              Viscosity contours
  con VISL z 1 fil;.001
  msg Press e to END
  ENDUSE
  DISPLAY
  This run analyses the flow in a cavity,  the top  wall  of  which
  moves   with  a  constant  velocity.  The  top  wall  is  at  one
  temperature,  the moving wall is at a different  temperature  and
  two  other  walls are adiabatic.  The calculation is made for the
  Reynolds number Re = 100 ,  for Prandtl number Pr = 1 and for the
  exponent in the viscosity formula EMU = EMU0*EXP(-beta.(T - T0)).
  ( See M. Morzynski and Cz. O. Popiel in Numerical Heat Transfer,
    v.13, pp. 265-273, 1988 for further details and comparison).

  The corresponding PIL statements are:
  REAL(ENULR,EXPO,TEMPR); ENULR=1.E-3;EXPO=-1.6;TEMPR=0.0
  followed by the PLANT property formula:
                     VISL=:ENULR:*EXP(:EXPO:*(TEMP-:TEMPR:))

  The values of ENULR, EXPO and TEMP may of course be changed;
  and the formula also.
  ENDDIS
  PLANTBEGIN
REAL(ENULR,EXPO,TEMPR); ENULR=1.E-3;EXPO=-1.6;TEMPR=0.0
    VISL=:ENULR:*EXP(:EXPO:*(TEMP-:TEMPR:))
  PLANTEND
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(In-Form equivalent of PLANT case Z100   )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 700
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 15
 XULAST =0.1
 XFRAC(1)=8.888888E-03 ;XFRAC(2)=0.035556
 XFRAC(3)=0.08 ;XFRAC(4)=0.142222
 XFRAC(5)=0.222222 ;XFRAC(6)=0.32
 XFRAC(7)=0.435556 ;XFRAC(8)=0.564444
 XFRAC(9)=0.68 ;XFRAC(10)=0.777778
 XFRAC(11)=0.857778 ;XFRAC(12)=0.92
 XFRAC(13)=0.964444 ;XFRAC(14)=0.991111
 XFRAC(15)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 15
 YVLAST =0.1
 YFRAC(1)=8.888888E-03 ;YFRAC(2)=0.035556
 YFRAC(3)=0.08 ;YFRAC(4)=0.142222
 YFRAC(5)=0.222222 ;YFRAC(6)=0.32
 YFRAC(7)=0.435556 ;YFRAC(8)=0.564444
 YFRAC(9)=0.68 ;YFRAC(10)=0.777778
 YFRAC(11)=0.857778 ;YFRAC(12)=0.92
 YFRAC(13)=0.964444 ;YFRAC(14)=0.991111
 YFRAC(15)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(14)=TEMP
 NAME(150)=VISL
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(TEMP,Y,Y,N,N,N,Y)
 SOLUTN(VISL,Y,N,N,N,N,Y)
 VISL = 150
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(TEMP,Y,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1. ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(TEMP)=0.7
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(TEMP)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(TEMP)=1.0E-10
 FIINIT(VISL)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(SOUTH ,SWALL , 1, 15, 1, 1, 1, 1, 1, 1)
 COVAL(SOUTH ,U1 ,1. ,0. )
 COVAL(SOUTH ,TEMP,1. ,0. )
 
 PATCH(MOVING ,NWALL , 1, 15, 15, 15, 1, 1, 1, 1)
 COVAL(MOVING ,U1 ,1. ,1. )
 COVAL(MOVING ,TEMP,1. ,1. )
 
 PATCH(WEST ,WWALL , 1, 1, 1, 15, 1, 1, 1, 1)
 COVAL(WEST ,V1 ,1. ,0. )
 
 PATCH(EAST ,EWALL , 15, 15, 1, 15, 1, 1, 1, 1)
 COVAL(EAST ,V1 ,1. ,0. )
 
 PATCH(RELIEF ,CELL , 7, 7, 7, 7, 1, 1, 1, 1)
 COVAL(RELIEF ,P1 ,1. ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 50 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(TEMP)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(TEMP)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(TEMP,FALSDT,1.0E+09)
 RELAX(VISL,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(TEMP)=1.0E+10 ;VARMIN(TEMP)=-1.0E+10
 VARMAX(VISL)=1.0E+10 ;VARMIN(VISL)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,PROPERTY,ENUL,C,=1.0E-03*EXP(-1.6*(TEMP-0.)))
 SPEDAT(SET,LONGNAME,VISL,C,=1.0E-03*EXP(-1.6*(TEMP-0.)))
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=0.03442 ;EX(U1)=0.1276
 EX(V1)=0.08064 ;EX(TEMP)=0.6309
 EX(VISL)=4.492E-04
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(TEMP,Y,N,Y,Y,Y,Y)
 OUTPUT(VISL,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 7 ;IYMON = 14 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(MIDX ,PROFIL, 7, 7, 1, 15, 1, 1, 1, 1)
 PLOT(MIDX ,U1 ,-1. ,1. )
 PLOT(MIDX ,TEMP,0. ,1. )
 
 PATCH(MAP ,CONTUR, 1, 15, 1, 15, 1, 1, 1, 1)
 PLOT(MAP ,U1 ,0. ,10. )
 PLOT(MAP ,V1 ,0. ,10. )
 PLOT(MAP ,TEMP,0. ,10. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP