TALK=T;RUN(1,1)
  photon use
  p;;;;;;

  view z

  vec z m sh
  pause;vec off;red
  msg pressure contours on central plane
  con p1 z m fi;0.001;pause;con off;red
  msg temperature contours on central plane
  con h1 z m fi;0.001;pause;con off;red
  msg turbulence-energy contours on central plane
  con ke z m fi;0.001;pause;con off;red
  msg effective viscosity contours on central plane
  con enut z m fi;0.001;pause;con off;red
  view x;  gr ou x 1; gr ou x m;  gr ou y m
  msg temperature contours at outlet
  con h1 x m fi;0.001;pause;con off;red
  msg velocity vectors in outlet plane
  set ref vec 0.3;vec x m sh
  msg magnify by 5 in order to see more detail
  upause 2;  mag gr 5
   0.17687E+04 0.61228E+03 CR

  msg the left-hand boundary is the symmetry plane
  enduse
   DISPLAY

   The steady flow of a turbulent fluid in a smooth-walled square-
   sectioned duct exhibits "secondary flow", ie radially-outward
   flow near the plane of symmetry and radially-inward flow near
   the plane walls.

   The k-epsilon turbulence model is used, with the KELIN=3
   linearization feature; and heat transfer is also computed.

   PHOTON USE commands are supplied.

   ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Secondary Flow In Curved Duct           )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = F
 NX = 20
 XULAST =3.159
 XFRAC(1)=0.05 ;XFRAC(2)=0.1
 XFRAC(3)=0.15 ;XFRAC(4)=0.2
 XFRAC(5)=0.25 ;XFRAC(6)=0.3
 XFRAC(7)=0.35 ;XFRAC(8)=0.4
 XFRAC(9)=0.45 ;XFRAC(10)=0.5
 XFRAC(11)=0.55 ;XFRAC(12)=0.6
 XFRAC(13)=0.65 ;XFRAC(14)=0.7
 XFRAC(15)=0.75 ;XFRAC(16)=0.8
 XFRAC(17)=0.85 ;XFRAC(18)=0.9
 XFRAC(19)=0.95 ;XFRAC(20)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 10
 YVLAST =0.02
 RINNER =0.05 ;SNALFA =0.
 YFRAC(1)=0.1 ;YFRAC(2)=0.2
 YFRAC(3)=0.3 ;YFRAC(4)=0.4
 YFRAC(5)=0.5 ;YFRAC(6)=0.6
 YFRAC(7)=0.7 ;YFRAC(8)=0.8
 YFRAC(9)=0.9 ;YFRAC(10)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 5
 ZWLAST =1.0E-02
 ZFRAC(1)=0.2 ;ZFRAC(2)=0.4
 ZFRAC(3)=0.6 ;ZFRAC(4)=0.8
 ZFRAC(5)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(7)=W1
 NAME(12)=KE ;NAME(13)=EP
 NAME(14)=H1 ;NAME(48)=ENUT
 NAME(49)=DEN1 ;NAME(150)=EPKE
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,N)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(KE,Y,Y,N,N,N,Y)
 SOLUTN(EP,Y,Y,N,N,N,Y)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 SOLUTN(DEN1,Y,N,N,N,N,Y)
 SOLUTN(EPKE,Y,N,N,N,N,N)
 DEN1 = 49
 VIST = 48
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(KE,Y,Y,Y,Y,Y,Y)
 TERMS(EP,Y,Y,Y,Y,N,Y)
 TERMS(H1,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWENT = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1.189 ;TMP1 =0. ;EL1 = GRND4
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 EL1A =0. ;EL1B =0. ;EL1C =0.
 ENUL =1.589E-05 ;ENUT = GRND3
 ENUTA =0. ;ENUTB =0. ;ENUTC =0.
 IENUTA = 0
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(W1)=1. ;PRNDTL(KE)=1.
 PRNDTL(EP)=1. ;PRNDTL(H1)=0.736
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(W1)=1. ;PRT(KE)=1.
 PRT(EP)=1.314 ;PRT(H1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.
 FIINIT(V1)=1.0E-10 ;FIINIT(W1)=1.0E-10
 FIINIT(KE)=1.0E-03 ;FIINIT(EP)=0.031623
 FIINIT(H1)=0. ;FIINIT(ENUT)=3.162278E-05
 FIINIT(DEN1)=1.0E-10 ;FIINIT(EPKE)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = T
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(KESOURCE,PHASEM, 1, 20, 1, 20, 1, 10, 1, 1)
 COVAL(KESOURCE,KE , GRND4 , GRND4 )
 COVAL(KESOURCE,EP , GRND4 , GRND4 )
 
 PATCH(INFLOW ,WEST , 1, 1, 1, 10, 1, 5, 1, 1)
 COVAL(INFLOW ,P1 , FIXFLU ,1.189 )
 COVAL(INFLOW ,U1 ,0. ,1. )
 COVAL(INFLOW ,KE ,0. ,1.0E-03 )
 COVAL(INFLOW ,EP ,0. ,0.031623 )
 COVAL(INFLOW ,H1 ,0. ,1. )
 
 PATCH(OUTFLOW ,WEST , 20, 20, 1, 10, 1, 5, 1, 1)
 COVAL(OUTFLOW ,P1 ,1.0E-03 ,0. )
 
 PATCH(LOWWALL ,LWALL , 1, 20, 1, 10, 1, 1, 1, 1)
 COVAL(LOWWALL ,U1 , GRND2 ,0. )
 COVAL(LOWWALL ,V1 , GRND2 ,0. )
 COVAL(LOWWALL ,KE , GRND2 ,0. )
 COVAL(LOWWALL ,EP , GRND2 ,0. )
 COVAL(LOWWALL ,H1 , GRND2 ,0. )
 
 PATCH(SOUWALL ,SWALL , 1, 20, 1, 1, 1, 5, 1, 1)
 COVAL(SOUWALL ,U1 , GRND2 ,0. )
 COVAL(SOUWALL ,W1 , GRND2 ,0. )
 COVAL(SOUWALL ,KE , GRND2 , GRND2 )
 COVAL(SOUWALL ,EP , GRND2 , GRND2 )
 COVAL(SOUWALL ,H1 , GRND2 ,0. )
 
 PATCH(NORWALL ,NWALL , 1, 20, 10, 10, 1, 5, 1, 1)
 COVAL(NORWALL ,U1 , GRND2 ,0. )
 COVAL(NORWALL ,W1 , GRND2 ,0. )
 COVAL(NORWALL ,KE , GRND2 , GRND2 )
 COVAL(NORWALL ,EP , GRND2 , GRND2 )
 COVAL(NORWALL ,H1 , GRND2 ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 50 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-02
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(W1)=10
 LITER(KE)=20 ;LITER(EP)=20
 LITER(H1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ENDIT(KE)=1.0E-03 ;ENDIT(EP)=1.0E-03
 ENDIT(H1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,0.15795)
 RELAX(V1,FALSDT,0.15795)
 RELAX(W1,FALSDT,0.015795)
 RELAX(KE,LINRLX,0.5)
 RELAX(EP,LINRLX,1.)
 RELAX(H1,FALSDT,1.0E+09)
 RELAX(ENUT,LINRLX,1.)
 RELAX(DEN1,LINRLX,1.)
 RELAX(EPKE,LINRLX,1.)
 KELIN = 3
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
 VARMAX(EP)=1.0E+10 ;VARMIN(EP)=1.0E-10
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
 VARMAX(EPKE)=1.0E+10 ;VARMIN(EPKE)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 GENK = T
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(KE,Y,N,Y,Y,Y,Y)
 OUTPUT(EP,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 OUTPUT(DEN1,Y,N,Y,N,N,N)
 OUTPUT(EPKE,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 19 ;IYMON = 5 ;IZMON = 2
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP