TALK=T;RUN(1,1)
  DISPLAY

  RADIATION AND CONVECTION FROM A HOT BLOCK

  Patches representing external heat loss by radiation
    (proportional to (Ts**4-Text**4))
  and by free convection
    (proportional to (Ts-Text)**n)
  are placed on the external surfaces of the heat-conducting block
  of case 100.

  enddis
  PHOTON USE
  p



  msg Temperature contours
  con tem1 z m fi;0.001
  con tem1 y m fi;0.001
  con tem1 x m fi;0.001
  msg Press e to END
  ENDUSE
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(3D Steady Heat Conduction In Cube       )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 5
 XULAST =1.
 XFRAC(1)=0.2 ;XFRAC(2)=0.4
 XFRAC(3)=0.6 ;XFRAC(4)=0.8
 XFRAC(5)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 5
 YVLAST =1.
 YFRAC(1)=0.2 ;YFRAC(2)=0.4
 YFRAC(3)=0.6 ;YFRAC(4)=0.8
 YFRAC(5)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 5
 ZWLAST =1.
 ZFRAC(1)=0.2 ;ZFRAC(2)=0.4
 ZFRAC(3)=0.6 ;ZFRAC(4)=0.8
 ZFRAC(5)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(149)=PRPS ;NAME(150)=TEM1
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 SOLUTN(TEM1,Y,Y,Y,N,N,Y)
 PRPS = 149
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(TEM1,N,N,Y,N,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = 1 ;ISOLY = 1 ;ISOLZ = 1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0.9 ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(TEM1)=1.
 PRT(TEM1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(PRPS)=100. ;FIINIT(TEM1)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(COLD ,CELL , 1, 1, 1, 1, 1, 1, 1, 1)
 COVAL(COLD ,TEM1,100. ,0. )
 
 PATCH(HOT ,CELL , 5, 5, 5, 5, 5, 5, 1, 1)
 COVAL(HOT ,TEM1,100. ,1. )
 
 PATCH(*RAD ,HIGH , 1, 5, 1, 5, 5, 5, 1, 1)
 COVAL(*RAD ,TEM1,5.10273E-08 ,100. )
 
 PATCH(*-3 ,NORTH , 1, 5, 5, 5, 1, 5, 1, 1)
 COVAL(*-3 ,TEM1,1000. ,50. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 100 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(TEM1)=100
 ENDIT(TEM1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(PRPS,LINRLX,1.)
 RELAX(TEM1,LINRLX,0.5)
 OVRRLX =1.7
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,MATERIAL,100,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(PRPS,N,N,N,N,N,N)
 OUTPUT(TEM1,Y,Y,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 3 ;IYMON = 3 ;IZMON = 3
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = 1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = 1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = 1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP