TALK=T;RUN(1,1)
DISPLAY
The case considered is fully-developed turbulent flow
and heat transfer in a circular pipe at a Reynolds number
of 1.E5 and a Prandtl number of 3.0. The tube wall is held
at a constant temperature and calculations may be made with
either a fully smooth or a fully rough surface with a relative
sand-grain roughness of 0.015. Also, the calculation may be made
with equilibrium (LOGLAW) or non-equilibrium (GENLAW) wall
functions. Both types of wall function should produce the same
results as the turbulence is in equilibrium for this flow.
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(1D Turb Pipe Flow & Heat Trans )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 502
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = F
NX = 1
XULAST =0.1
XFRAC(1)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 30
YVLAST =0.05
YFRAC(1)=0.066156 ;YFRAC(2)=0.115185
YFRAC(3)=0.15932 ;YFRAC(4)=0.200549
YFRAC(5)=0.239744 ;YFRAC(6)=0.277392
YFRAC(7)=0.313798 ;YFRAC(8)=0.349176
YFRAC(9)=0.383678 ;YFRAC(10)=0.417419
YFRAC(11)=0.450491 ;YFRAC(12)=0.482967
YFRAC(13)=0.514905 ;YFRAC(14)=0.546355
YFRAC(15)=0.577358 ;YFRAC(16)=0.607951
YFRAC(17)=0.638163 ;YFRAC(18)=0.668021
YFRAC(19)=0.69755 ;YFRAC(20)=0.726769
YFRAC(21)=0.755697 ;YFRAC(22)=0.784351
YFRAC(23)=0.812746 ;YFRAC(24)=0.840894
YFRAC(25)=0.868809 ;YFRAC(26)=0.896502
YFRAC(27)=0.923982 ;YFRAC(28)=0.951259
YFRAC(29)=0.978342 ;YFRAC(30)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 1
ZWLAST =1.
ZFRAC(1)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(7)=W1 ;NAME(12)=KE
NAME(13)=EP ;NAME(143)=STRS
NAME(144)=YPLS ;NAME(145)=STAN
NAME(146)=SKIN ;NAME(147)=GENK
NAME(148)=LEN1 ;NAME(149)=ENUT
NAME(150)=TEM1
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(W1,Y,Y,N,N,N,Y)
SOLUTN(KE,Y,Y,N,N,N,N)
SOLUTN(EP,Y,Y,N,N,N,N)
SOLUTN(STRS,Y,N,N,N,N,Y)
SOLUTN(YPLS,Y,N,N,N,N,Y)
SOLUTN(STAN,Y,N,N,N,N,Y)
SOLUTN(SKIN,Y,N,N,N,N,Y)
SOLUTN(GENK,Y,N,N,N,N,Y)
SOLUTN(LEN1,Y,N,N,N,N,Y)
SOLUTN(ENUT,Y,N,N,N,N,Y)
SOLUTN(TEM1,Y,Y,N,N,N,Y)
VIST = 149
LEN1 = 148
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(W1,N,N,Y,Y,Y,Y)
TERMS(KE,Y,N,Y,Y,Y,N)
TERMS(EP,Y,N,Y,Y,Y,N)
TERMS(TEM1,N,N,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
NEWENT = T
USOURC = T
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 = GRND4
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
EL1A =0. ;EL1B =0. ;EL1C =0.
ENUL =1.0E-06 ;ENUT = GRND3
ENUTA =0. ;ENUTB =0. ;ENUTC =0.
IENUTA = 0
PRNDTL(W1)=1. ;PRNDTL(KE)=1.
PRNDTL(EP)=1. ;PRNDTL(TEM1)=3.
PRT(W1)=1. ;PRT(KE)=1.
PRT(EP)=1.314 ;PRT(TEM1)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(W1)=1. ;FIINIT(KE)=0.010915
FIINIT(EP)=0.041637 ;FIINIT(STRS)=1.0E-10
FIINIT(YPLS)=1.0E-10 ;FIINIT(STAN)=1.0E-10
FIINIT(SKIN)=1.0E-10 ;FIINIT(GENK)=1.0E-10
FIINIT(LEN1)=1.0E-10 ;FIINIT(ENUT)=1.0E-10
FIINIT(TEM1)=5.
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(KESOURCE,PHASEM, 0, 0, 0, 0, 0, 0, 1, 1)
COVAL(KESOURCE,KE , GRND4 , GRND4 )
COVAL(KESOURCE,EP , GRND4 , GRND4 )
PATCH(WALLN ,NWALL , 1, 1, 30, 30, 1, 1, 1, 1)
COVAL(WALLN ,W1 , GRND2 ,0. )
COVAL(WALLN ,KE , GRND2 , GRND2 )
COVAL(WALLN ,EP , GRND2 , GRND2 )
COVAL(WALLN ,TEM1, GRND2 ,10. )
PATCH(FDFW1DP ,VOLUME, 1, 1, 1, 30, 1, 1, 1, 1)
COVAL(FDFW1DP ,W1 ,1.25E-04 , GRND1 )
PATCH(FDFCWT ,PHASEM, 1, 1, 1, 30, 1, 1, 1, 1)
COVAL(FDFCWT ,TEM1,0.23795 ,10. )
XCYCLE = F
WALLA =1.5E-03 ;WALLB =0.
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 20 ;ISWC1 = 1
LITHYD = 5 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-05
************************************************************
Group 16. Terminate Iterations
LITER(W1)=10 ;LITER(KE)=20
LITER(EP)=20 ;LITER(TEM1)=20
ENDIT(W1)=1.0E-03 ;ENDIT(KE)=1.0E-03
ENDIT(EP)=1.0E-03 ;ENDIT(TEM1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(W1,FALSDT,10.)
RELAX(KE,FALSDT,10.)
RELAX(EP,FALSDT,10.)
RELAX(STRS,LINRLX,1.)
RELAX(YPLS,LINRLX,1.)
RELAX(STAN,LINRLX,1.)
RELAX(SKIN,LINRLX,1.)
RELAX(GENK,LINRLX,1.)
RELAX(LEN1,LINRLX,1.)
RELAX(ENUT,LINRLX,1.)
RELAX(TEM1,FALSDT,1.0E+09)
KELIN = 1
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=1.0E-10
VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
VARMAX(EP)=1.0E+10 ;VARMIN(EP)=1.0E-10
VARMAX(STRS)=1.0E+10 ;VARMIN(STRS)=-1.0E+10
VARMAX(YPLS)=1.0E+10 ;VARMIN(YPLS)=-1.0E+10
VARMAX(STAN)=1.0E+10 ;VARMIN(STAN)=-1.0E+10
VARMAX(SKIN)=1.0E+10 ;VARMIN(SKIN)=-1.0E+10
VARMAX(GENK)=1.0E+10 ;VARMIN(GENK)=-1.0E+10
VARMAX(LEN1)=1.0E+10 ;VARMIN(LEN1)=-1.0E+10
VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
GENK = T
FDFSOL = T
PARSOL = F
ISG62 = 1
SPEDAT(SET,GXMONI,PLOTALL,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(KE,Y,N,Y,Y,Y,Y)
OUTPUT(EP,Y,N,Y,Y,Y,Y)
OUTPUT(STRS,Y,N,Y,N,N,N)
OUTPUT(YPLS,Y,N,Y,N,N,N)
OUTPUT(STAN,Y,N,Y,N,N,N)
OUTPUT(SKIN,Y,N,Y,N,N,N)
OUTPUT(GENK,Y,N,Y,N,N,N)
OUTPUT(LEN1,Y,N,Y,N,N,N)
OUTPUT(ENUT,Y,N,Y,N,N,N)
OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
WALPRN = T
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 28 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
IPLTF = 1 ;IPLTL = -1 ;NPLT = 2
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP