TALK=T;RUN(1,1)
PHOTON USE
AUTOPLOT
upause 1
file; phida 3
cl; da 1; yco2; da 1; yo2; da 1; yco; scale; cola 1; col3 2
colf 3
msg mass fractions of CO2 - yellow, O2 - blue, CO - red ....more
pause; cl; da 1; yh2o; da 1; mixf; scale; col3 1; colf 2
msg mass fractions of H2O - blue, coal-derived gas - red ....more
pause; cl; da 1; tmp1; da 1; tmp2; scale; colf 1; cola 2
msg temp of gas - red, of coal - yellow. ....more
pause; cl; da 1; gvel; da 1; cvel; col3 1; col8 2
msg gas velocity - blue, coal velocity - green.
pause; end
enduse
DISPLAY
Coal-combustion model; two-phase, with slip.
Reactions: C (s) + 0.5 O2 > CO (exothermic )
CO + 0.5 O2 > CO2 (exothermic )
C(s) + CO2 > 2CO (endothermic)
C(s) + H2O > CO + H2 (endothermic)
H2 + 0.5 O2 > H2O (exothermic )
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(2DYZ Coal-Particle Combustion )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 479
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 1
XULAST =1.
XFRAC(1)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 10
YVLAST =2.
YFRAC(1)=0.1 ;YFRAC(2)=0.2
YFRAC(3)=0.3 ;YFRAC(4)=0.4
YFRAC(5)=0.5 ;YFRAC(6)=0.6
YFRAC(7)=0.7 ;YFRAC(8)=0.8
YFRAC(9)=0.9 ;YFRAC(10)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 20
ZWLAST =10.
ZFRAC(1)=0.05 ;ZFRAC(2)=0.1
ZFRAC(3)=0.15 ;ZFRAC(4)=0.2
ZFRAC(5)=0.25 ;ZFRAC(6)=0.3
ZFRAC(7)=0.35 ;ZFRAC(8)=0.4
ZFRAC(9)=0.45 ;ZFRAC(10)=0.5
ZFRAC(11)=0.55 ;ZFRAC(12)=0.6
ZFRAC(13)=0.65 ;ZFRAC(14)=0.7
ZFRAC(15)=0.75 ;ZFRAC(16)=0.8
ZFRAC(17)=0.85 ;ZFRAC(18)=0.9
ZFRAC(19)=0.95 ;ZFRAC(20)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = F
EQUVEL = F
NAME(1)=P1 ;NAME(5)=V1
NAME(6)=V2 ;NAME(7)=GVEL
NAME(8)=CVEL ;NAME(9)=GAS
NAME(10)=FUEL ;NAME(11)=SHAD
NAME(14)=H1 ;NAME(15)=H2
NAME(16)=MIXF ;NAME(139)=TMP2
NAME(140)=TMP1 ;NAME(141)=RHO2
NAME(142)=RHO1 ;NAME(143)=YH2O
NAME(144)=YH2 ;NAME(145)=YN2
NAME(146)=YCO2 ;NAME(147)=YO2
NAME(148)=YCO ;NAME(149)=CFIP
NAME(150)=MDOT
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,Y,N,N,Y)
SOLUTN(V1,Y,Y,Y,N,N,Y)
SOLUTN(V2,Y,Y,Y,N,N,Y)
SOLUTN(GVEL,Y,Y,Y,N,N,Y)
SOLUTN(CVEL,Y,Y,Y,N,N,Y)
SOLUTN(GAS,Y,Y,Y,Y,N,Y)
SOLUTN(FUEL,Y,Y,Y,Y,N,Y)
SOLUTN(SHAD,Y,Y,Y,Y,N,Y)
SOLUTN(H1,Y,Y,Y,N,N,Y)
SOLUTN(H2,Y,Y,Y,N,N,Y)
SOLUTN(MIXF,Y,Y,Y,N,N,Y)
SOLUTN(TMP2,Y,N,N,N,N,Y)
SOLUTN(TMP1,Y,N,N,N,N,Y)
SOLUTN(RHO2,Y,N,N,N,N,Y)
SOLUTN(RHO1,Y,N,N,N,N,Y)
SOLUTN(YH2O,Y,N,N,N,N,Y)
SOLUTN(YH2,Y,N,N,N,N,Y)
SOLUTN(YN2,Y,N,N,N,N,Y)
SOLUTN(YCO2,Y,N,N,N,N,Y)
SOLUTN(YO2,Y,N,N,N,N,Y)
SOLUTN(YCO,Y,N,N,N,N,Y)
SOLUTN(CFIP,Y,N,N,N,N,Y)
SOLUTN(MDOT,Y,N,N,N,N,Y)
DEN1 = 142
DEN2 = 141
INTMDT = 150
TEMP1 = 140
TEMP2 = 139
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
TERMS(V2,Y,Y,Y,Y,N,Y)
TERMS(GVEL,Y,Y,Y,Y,Y,Y)
TERMS(CVEL,Y,Y,Y,Y,N,Y)
TERMS(GAS,Y,Y,Y,Y,Y,Y)
TERMS(FUEL,Y,Y,Y,Y,N,Y)
TERMS(SHAD,Y,Y,Y,Y,N,Y)
TERMS(H1,N,Y,Y,Y,Y,Y)
TERMS(H2,N,Y,Y,Y,N,Y)
TERMS(MIXF,N,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
NEWRH1 = T
EQDVDP = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 = GRND7 ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =1.0E+05
DVO1DT =0. ;DRH1DP =0.
RHO1A =0.86 ;RHO1B =0.05 ;RHO1C =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
RHO2 =1000. ;TMP2 =0. ;EL2 =0.
DVO2DT =0. ;DRH2DP =0.
ENUL =1.0E-05 ;ENUT =0.
PHINT(V1)=-2.022E+04 ;PHINT(V2)=-2.022E+04
PHINT(GVEL)=-2.022E+04 ;PHINT(CVEL)=-2.022E+04
PHINT(GAS)=-2.022E+04 ;PHINT(FUEL)=-2.022E+04
PHINT(SHAD)=-2.022E+04 ;PHINT(H1)=GRND7
PHINT(H2)=GRND7 ;PHINT(MIXF)=1.
PHNH1A =0. ;PHNH1B =0. ;PHNH1C =0.
PHNH2A =0. ;PHNH2B =0. ;PHNH2C =0.
PRNDTL(V1)=1. ;PRNDTL(V2)=1.
PRNDTL(GVEL)=1. ;PRNDTL(CVEL)=1.
PRNDTL(GAS)=1. ;PRNDTL(FUEL)=1.
PRNDTL(SHAD)=1. ;PRNDTL(H1)=1.
PRNDTL(H2)=1. ;PRNDTL(MIXF)=1.
PRT(V1)=1. ;PRT(V2)=1.
PRT(GVEL)=1. ;PRT(CVEL)=1.
PRT(GAS)=1. ;PRT(FUEL)=1.
PRT(SHAD)=1. ;PRT(H1)=1.
PRT(H2)=1. ;PRT(MIXF)=1.
CP1 =1100. ;CP2 =1100.
************************************************************
Group 10.Inter-Phase Transfer Processes
CFIPS = GRND1
RLOLIM =0. ;CMDOT = GRND3
CFIPA =0. ;CFIPB =0.
CFIPC =1.0E+05 ;CFIPD =0.
CMDTA =1.0E+04 ;CMDTB =0.
CMDTC =0.168279 ;CMDTD =0.
CINT(P1)=1. ;CINT(V1)=1.
CINT(V2)=1. ;CINT(GVEL)=1.
CINT(CVEL)=1. ;CINT(GAS)=1.
CINT(FUEL)=1. ;CINT(SHAD)=1.
CINT(H1)=1. ;CINT(H2)=1.
CINT(MIXF)=0.
PHINT(P1)=-2.022E+04 ;PHINT(V1)=-2.022E+04
PHINT(V2)=-2.022E+04 ;PHINT(GVEL)=-2.022E+04
PHINT(CVEL)=-2.022E+04 ;PHINT(GAS)=-2.022E+04
PHINT(FUEL)=-2.022E+04 ;PHINT(SHAD)=-2.022E+04
PHINT(H1)=GRND7 ;PHINT(H2)=GRND7
PHINT(MIXF)=1.
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
FIINIT(V2)=1.0E-10 ;FIINIT(GVEL)=3.236599
FIINIT(CVEL)=1. ;FIINIT(GAS)=0.999
FIINIT(FUEL)=1.0E-03 ;FIINIT(SHAD)=1.0E-03
FIINIT(H1)=5.5E+05 ;FIINIT(H2)=3.463112E+07
FIINIT(MIXF)=0. ;FIINIT(TMP2)=1.0E-10
FIINIT(TMP1)=1.0E-10 ;FIINIT(RHO2)=1.0E-10
FIINIT(RHO1)=0.69587 ;FIINIT(YH2O)=1.0E-10
FIINIT(YH2)=1.0E-10 ;FIINIT(YN2)=1.0E-10
FIINIT(YCO2)=1.0E-10 ;FIINIT(YO2)=1.0E-10
FIINIT(YCO)=1.0E-10 ;FIINIT(CFIP)=1.0E-10
FIINIT(MDOT)=1.0E-02
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(INLETS ,LOW , 1, 1, 1, 1, 1, 1, 1, 1)
COVAL(INLETS ,CVEL,0. ,1. )
COVAL(INLETS ,FUEL, FIXFLU ,1. )
COVAL(INLETS ,H2 ,0. ,3.463112E+07 )
PATCH(INLETG ,LOW , 1, 1, 2, 10, 1, 1, 1, 1)
COVAL(INLETG ,GVEL,0. ,3.236599 )
COVAL(INLETG ,GAS , FIXFLU ,2.25 )
COVAL(INLETG ,H1 ,0. ,5.5E+05 )
COVAL(INLETG ,MIXF,0. ,0. )
PATCH(OUTLET ,CELL , 1, 1, 1, 10, 20, 20, 1, 1)
COVAL(OUTLET ,GAS ,100. ,0. )
COVAL(OUTLET ,FUEL,1.0E+06 ,0. )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 2000 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
ISWR1 = 1 ;ISWR2 = 10000
SELREF = T
RESFAC =1.0E-03
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(V1)=10
LITER(V2)=10 ;LITER(GVEL)=10
LITER(CVEL)=10 ;LITER(GAS)=1
LITER(FUEL)=1 ;LITER(SHAD)=1
LITER(H1)=20 ;LITER(H2)=20
LITER(MIXF)=20
ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
ENDIT(V2)=1.0E-03 ;ENDIT(GVEL)=1.0E-03
ENDIT(CVEL)=1.0E-03 ;ENDIT(GAS)=1.0E-03
ENDIT(FUEL)=1.0E-03 ;ENDIT(SHAD)=1.0E-03
ENDIT(H1)=1.0E-03 ;ENDIT(H2)=1.0E-03
ENDIT(MIXF)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,0.5)
RELAX(V1,FALSDT,3.089663E-03)
RELAX(V2,FALSDT,3.089663E-03)
RELAX(GVEL,FALSDT,3.089663E-03)
RELAX(CVEL,FALSDT,3.089663E-03)
RELAX(GAS,LINRLX,0.4)
RELAX(FUEL,LINRLX,0.4)
RELAX(SHAD,LINRLX,0.4)
RELAX(H1,FALSDT,3.089663E-03)
RELAX(H2,FALSDT,3.089663E-03)
RELAX(MIXF,FALSDT,3.089663E-05)
RELAX(TMP2,LINRLX,1.)
RELAX(TMP1,LINRLX,1.)
RELAX(RHO2,LINRLX,1.)
RELAX(RHO1,LINRLX,0.5)
RELAX(YH2O,LINRLX,1.)
RELAX(YH2,LINRLX,1.)
RELAX(YN2,LINRLX,1.)
RELAX(YCO2,LINRLX,1.)
RELAX(YO2,LINRLX,1.)
RELAX(YCO,LINRLX,1.)
RELAX(CFIP,LINRLX,1.)
RELAX(MDOT,LINRLX,0.3)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(V2)=1.0E+06 ;VARMIN(V2)=-1.0E+06
VARMAX(GVEL)=1.0E+06 ;VARMIN(GVEL)=-1.0E+06
VARMAX(CVEL)=1.0E+06 ;VARMIN(CVEL)=-1.0E+06
VARMAX(GAS)=1. ;VARMIN(GAS)=1.0E-06
VARMAX(FUEL)=1. ;VARMIN(FUEL)=1.0E-09
VARMAX(SHAD)=1. ;VARMIN(SHAD)=1.0E-06
VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
VARMAX(H2)=1.0E+10 ;VARMIN(H2)=-1.0E+10
VARMAX(MIXF)=0.168279 ;VARMIN(MIXF)=0.
VARMAX(TMP2)=1.0E+10 ;VARMIN(TMP2)=-1.0E+10
VARMAX(TMP1)=1.0E+10 ;VARMIN(TMP1)=-1.0E+10
VARMAX(RHO2)=1.0E+10 ;VARMIN(RHO2)=-1.0E+10
VARMAX(RHO1)=1.0E+10 ;VARMIN(RHO1)=-1.0E+10
VARMAX(YH2O)=1.0E+10 ;VARMIN(YH2O)=-1.0E+10
VARMAX(YH2)=1.0E+10 ;VARMIN(YH2)=-1.0E+10
VARMAX(YN2)=1.0E+10 ;VARMIN(YN2)=-1.0E+10
VARMAX(YCO2)=1.0E+10 ;VARMIN(YCO2)=-1.0E+10
VARMAX(YO2)=1.0E+10 ;VARMIN(YO2)=-1.0E+10
VARMAX(YCO)=1.0E+10 ;VARMIN(YCO)=-1.0E+10
VARMAX(CFIP)=1.0E+10 ;VARMIN(CFIP)=-1.0E+10
VARMAX(MDOT)=1.0E+10 ;VARMIN(MDOT)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,GXMONI,PLOTALL,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,Y,Y,Y,Y,Y)
OUTPUT(V1,Y,Y,Y,Y,Y,Y)
OUTPUT(V2,Y,Y,Y,Y,Y,Y)
OUTPUT(GVEL,Y,Y,Y,Y,Y,Y)
OUTPUT(CVEL,Y,Y,Y,Y,Y,Y)
OUTPUT(GAS,Y,Y,Y,Y,Y,Y)
OUTPUT(FUEL,Y,Y,Y,Y,Y,Y)
OUTPUT(SHAD,Y,Y,Y,Y,Y,Y)
OUTPUT(H1,Y,Y,Y,Y,Y,Y)
OUTPUT(H2,Y,Y,Y,Y,Y,Y)
OUTPUT(MIXF,Y,Y,Y,Y,Y,Y)
OUTPUT(TMP2,Y,N,Y,N,N,N)
OUTPUT(TMP1,Y,N,Y,N,N,N)
OUTPUT(RHO2,Y,N,Y,N,N,N)
OUTPUT(RHO1,Y,N,Y,N,N,N)
OUTPUT(YH2O,Y,N,Y,N,N,N)
OUTPUT(YH2,Y,N,Y,N,N,N)
OUTPUT(YN2,Y,N,Y,N,N,N)
OUTPUT(YCO2,Y,N,Y,N,N,N)
OUTPUT(YO2,Y,N,Y,N,N,N)
OUTPUT(YCO,Y,N,Y,N,N,N)
OUTPUT(CFIP,Y,N,Y,N,N,N)
OUTPUT(MDOT,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 8 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = 1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 1 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.2
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
PATCH(PROFIL1 ,PROFIL, 1, 1, 1, 10, 1, 20, 1, 1)
PLOT(PROFIL1 ,FUEL,0. ,0. )
PLOT(PROFIL1 ,MIXF,0. ,0. )
PLOT(PROFIL1 ,YCO2,0. ,0. )
PLOT(PROFIL1 ,YCO ,0. ,0. )
PATCH(PROFIL2 ,PROFIL, 1, 1, 1, 1, 10, 20, 1, 1)
PLOT(PROFIL2 ,P1 ,0. ,0. )
PLOT(PROFIL2 ,V1 ,0. ,0. )
PLOT(PROFIL2 ,GVEL,0. ,0. )
PLOT(PROFIL2 ,RHO1,0. ,0. )
PATCH(PROFIL3 ,PROFIL, 1, 1, 1, 10, 1, 20, 1, 1)
PLOT(PROFIL3 ,TMP2,0. ,0. )
PLOT(PROFIL3 ,TMP1,0. ,0. )
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP