TALK=T;RUN(1,1)
PHOTON USE
p;;;;
set prop off
vi 1 2 3
msg Temperature contours on plane at mid-y
con tem1 y 25 fi; 0.01
msg press return to display the ellipsoid
pause
con off
red
msg Iso-surface mark=0.99 being drawn. Please wait
sur mark x 0.99 col 10
ENDUSE
DISPLAY
A ellipsoid-shaped In-Form object is used for the specification
of the initial (and unchanging) values of the material index,
PRPS.
The value assigned is 100, which corresponds to aluminium.
The object is surrounded by air, and placed between a hot and a
cold wall.
The steady-state temperature distribution as influenced by
conduction alone.
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(ellipsoid-shaped In-Form object )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 50
XULAST =1.
XFRAC(1)=0.02 ;XFRAC(2)=0.04
XFRAC(3)=0.06 ;XFRAC(4)=0.08
XFRAC(5)=0.1 ;XFRAC(6)=0.12
XFRAC(7)=0.14 ;XFRAC(8)=0.16
XFRAC(9)=0.18 ;XFRAC(10)=0.2
XFRAC(11)=0.22 ;XFRAC(12)=0.24
XFRAC(13)=0.26 ;XFRAC(14)=0.28
XFRAC(15)=0.3 ;XFRAC(16)=0.32
XFRAC(17)=0.34 ;XFRAC(18)=0.36
XFRAC(19)=0.38 ;XFRAC(20)=0.4
XFRAC(21)=0.42 ;XFRAC(22)=0.44
XFRAC(23)=0.46 ;XFRAC(24)=0.48
XFRAC(25)=0.5 ;XFRAC(26)=0.52
XFRAC(27)=0.54 ;XFRAC(28)=0.56
XFRAC(29)=0.58 ;XFRAC(30)=0.6
XFRAC(31)=0.62 ;XFRAC(32)=0.64
XFRAC(33)=0.66 ;XFRAC(34)=0.68
XFRAC(35)=0.7 ;XFRAC(36)=0.72
XFRAC(37)=0.74 ;XFRAC(38)=0.76
XFRAC(39)=0.78 ;XFRAC(40)=0.8
XFRAC(41)=0.82 ;XFRAC(42)=0.84
XFRAC(43)=0.86 ;XFRAC(44)=0.88
XFRAC(45)=0.9 ;XFRAC(46)=0.92
XFRAC(47)=0.94 ;XFRAC(48)=0.96
XFRAC(49)=0.98 ;XFRAC(50)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 50
YVLAST =1.
YFRAC(1)=0.02 ;YFRAC(2)=0.04
YFRAC(3)=0.06 ;YFRAC(4)=0.08
YFRAC(5)=0.1 ;YFRAC(6)=0.12
YFRAC(7)=0.14 ;YFRAC(8)=0.16
YFRAC(9)=0.18 ;YFRAC(10)=0.2
YFRAC(11)=0.22 ;YFRAC(12)=0.24
YFRAC(13)=0.26 ;YFRAC(14)=0.28
YFRAC(15)=0.3 ;YFRAC(16)=0.32
YFRAC(17)=0.34 ;YFRAC(18)=0.36
YFRAC(19)=0.38 ;YFRAC(20)=0.4
YFRAC(21)=0.42 ;YFRAC(22)=0.44
YFRAC(23)=0.46 ;YFRAC(24)=0.48
YFRAC(25)=0.5 ;YFRAC(26)=0.52
YFRAC(27)=0.54 ;YFRAC(28)=0.56
YFRAC(29)=0.58 ;YFRAC(30)=0.6
YFRAC(31)=0.62 ;YFRAC(32)=0.64
YFRAC(33)=0.66 ;YFRAC(34)=0.68
YFRAC(35)=0.7 ;YFRAC(36)=0.72
YFRAC(37)=0.74 ;YFRAC(38)=0.76
YFRAC(39)=0.78 ;YFRAC(40)=0.8
YFRAC(41)=0.82 ;YFRAC(42)=0.84
YFRAC(43)=0.86 ;YFRAC(44)=0.88
YFRAC(45)=0.9 ;YFRAC(46)=0.92
YFRAC(47)=0.94 ;YFRAC(48)=0.96
YFRAC(49)=0.98 ;YFRAC(50)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 50
ZWLAST =1.
ZFRAC(1)=0.02 ;ZFRAC(2)=0.04
ZFRAC(3)=0.06 ;ZFRAC(4)=0.08
ZFRAC(5)=0.1 ;ZFRAC(6)=0.12
ZFRAC(7)=0.14 ;ZFRAC(8)=0.16
ZFRAC(9)=0.18 ;ZFRAC(10)=0.2
ZFRAC(11)=0.22 ;ZFRAC(12)=0.24
ZFRAC(13)=0.26 ;ZFRAC(14)=0.28
ZFRAC(15)=0.3 ;ZFRAC(16)=0.32
ZFRAC(17)=0.34 ;ZFRAC(18)=0.36
ZFRAC(19)=0.38 ;ZFRAC(20)=0.4
ZFRAC(21)=0.42 ;ZFRAC(22)=0.44
ZFRAC(23)=0.46 ;ZFRAC(24)=0.48
ZFRAC(25)=0.5 ;ZFRAC(26)=0.52
ZFRAC(27)=0.54 ;ZFRAC(28)=0.56
ZFRAC(29)=0.58 ;ZFRAC(30)=0.6
ZFRAC(31)=0.62 ;ZFRAC(32)=0.64
ZFRAC(33)=0.66 ;ZFRAC(34)=0.68
ZFRAC(35)=0.7 ;ZFRAC(36)=0.72
ZFRAC(37)=0.74 ;ZFRAC(38)=0.76
ZFRAC(39)=0.78 ;ZFRAC(40)=0.8
ZFRAC(41)=0.82 ;ZFRAC(42)=0.84
ZFRAC(43)=0.86 ;ZFRAC(44)=0.88
ZFRAC(45)=0.9 ;ZFRAC(46)=0.92
ZFRAC(47)=0.94 ;ZFRAC(48)=0.96
ZFRAC(49)=0.98 ;ZFRAC(50)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(148)=MARK ;NAME(149)=PRPS
NAME(150)=TEM1
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(MARK,Y,N,N,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(TEM1,Y,Y,Y,N,N,Y)
PRPS = 149
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(TEM1,N,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1.0E-05 ;ENUT =0.
PRNDTL(TEM1)=1.
PRT(TEM1)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(MARK)=1.0E-10 ;FIINIT(PRPS)=0.
FIINIT(TEM1)=1.0E-10
No PATCHes yet used for this Group
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(PATCH1 ,VOLUME, 1, 50, 1, 50, 1, 50, 1, 1)
PATCH(LOW ,LWALL , 1, 50, 1, 50, 1, 1, 1, 1)
COVAL(LOW ,TEM1,1. ,-1. )
PATCH(HIGH ,HWALL , 1, 50, 1, 50, 50, 50, 1, 1)
COVAL(HIGH ,TEM1,1. ,1. )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 2 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-03
************************************************************
Group 16. Terminate Iterations
LITER(TEM1)=200
ENDIT(TEM1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(MARK,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
RELAX(TEM1,FALSDT,1.0E+09)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(MARK)=1.0E+10 ;VARMIN(MARK)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG50 = 1
ISG52 = 2
ISG62 = 1
SPEDAT(SET,MATERIAL,100,L,T)
SPEDAT(SET,STORED,MARK!PATCH1,C,=1.0!INFOB_1!ZSLFIN)
SPEDAT(SET,INITIAL,PRPS,C,=100!INFOB_1)
SPEDAT(SET,INFOB,*!PATCH1,C,=ELLPSD(0.25&0.25&0.25&0.5&0.333333&0$)
SPEDAT(SET,INFOB,*!PATCH1,C,.25&0.25&0.25&0.25)!INFOB_1)
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,MATERIAL,0,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(MARK,Y,N,Y,N,N,N)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 1 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = T
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP