TALK=T;RUN(1,1)
DISPLAY
This case is like 378, but use the xz-plane instead of xy.
A wide thin box moves diagonally across a two-dimensional space
at uniform velocity. A box is an InForm-made object.
The domain contains a porous medium causing resistance to flow.
It places across all domain.
The boundaries of the domain are open.
The fluid is non-compressible.
Parameters are provided which enable the effects on convergence
and accuracy to be noted of:
* box size divided by cell size;
* time to traverse a cell divided by time step;
* the compressibility factor;
* the resistance coefficient;
* pressure-drop coefficients at the ends of the domain.
ENUL=1.0 for setting one-dimensional flow.
PHOTON USE commands are included to assist display of results.
ENDDIS
photon use
p
p2;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p3;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p4;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p5;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p6;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p7;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p8;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p9;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p10;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
p
p11;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p12;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p13;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p14;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p15;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p16;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p17;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p18;
gr ou y 1
ve y 1 sh
surf obid y 0.1
upause 2
p
p19;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
upause 2
p
p20;
gr ou y 1
set prop off
ve y 1 sh
surf obid y 0.1
enduse
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(MOFOR/In-Form: diagonal motion in XZ )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
STEADY = F
* Set overall time and no. of steps
TFIRST =0. ;TLAST =10.
FSTEP = 1 ;LSTEP = 20
TFRAC(1)=0.05 ;TFRAC(2)=0.1
TFRAC(3)=0.15 ;TFRAC(4)=0.2
TFRAC(5)=0.25 ;TFRAC(6)=0.3
TFRAC(7)=0.35 ;TFRAC(8)=0.4
TFRAC(9)=0.45 ;TFRAC(10)=0.5
TFRAC(11)=0.55 ;TFRAC(12)=0.6
TFRAC(13)=0.65 ;TFRAC(14)=0.7
TFRAC(15)=0.75 ;TFRAC(16)=0.8
TFRAC(17)=0.85 ;TFRAC(18)=0.9
TFRAC(19)=0.95 ;TFRAC(20)=1.
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 40
XULAST =1.
XFRAC(1)=0.025 ;XFRAC(2)=0.05
XFRAC(3)=0.075 ;XFRAC(4)=0.1
XFRAC(5)=0.125 ;XFRAC(6)=0.15
XFRAC(7)=0.175 ;XFRAC(8)=0.2
XFRAC(9)=0.225 ;XFRAC(10)=0.25
XFRAC(11)=0.275 ;XFRAC(12)=0.3
XFRAC(13)=0.325 ;XFRAC(14)=0.35
XFRAC(15)=0.375 ;XFRAC(16)=0.4
XFRAC(17)=0.425 ;XFRAC(18)=0.45
XFRAC(19)=0.475 ;XFRAC(20)=0.5
XFRAC(21)=0.525 ;XFRAC(22)=0.55
XFRAC(23)=0.575 ;XFRAC(24)=0.6
XFRAC(25)=0.625 ;XFRAC(26)=0.65
XFRAC(27)=0.675 ;XFRAC(28)=0.7
XFRAC(29)=0.725 ;XFRAC(30)=0.75
XFRAC(31)=0.775 ;XFRAC(32)=0.8
XFRAC(33)=0.825 ;XFRAC(34)=0.85
XFRAC(35)=0.875 ;XFRAC(36)=0.9
XFRAC(37)=0.925 ;XFRAC(38)=0.95
XFRAC(39)=0.975 ;XFRAC(40)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 1
YVLAST =0.1
YFRAC(1)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 40
ZWLAST =1.
ZFRAC(1)=0.025 ;ZFRAC(2)=0.05
ZFRAC(3)=0.075 ;ZFRAC(4)=0.1
ZFRAC(5)=0.125 ;ZFRAC(6)=0.15
ZFRAC(7)=0.175 ;ZFRAC(8)=0.2
ZFRAC(9)=0.225 ;ZFRAC(10)=0.25
ZFRAC(11)=0.275 ;ZFRAC(12)=0.3
ZFRAC(13)=0.325 ;ZFRAC(14)=0.35
ZFRAC(15)=0.375 ;ZFRAC(16)=0.4
ZFRAC(17)=0.425 ;ZFRAC(18)=0.45
ZFRAC(19)=0.475 ;ZFRAC(20)=0.5
ZFRAC(21)=0.525 ;ZFRAC(22)=0.55
ZFRAC(23)=0.575 ;ZFRAC(24)=0.6
ZFRAC(25)=0.625 ;ZFRAC(26)=0.65
ZFRAC(27)=0.675 ;ZFRAC(28)=0.7
ZFRAC(29)=0.725 ;ZFRAC(30)=0.75
ZFRAC(31)=0.775 ;ZFRAC(32)=0.8
ZFRAC(33)=0.825 ;ZFRAC(34)=0.85
ZFRAC(35)=0.875 ;ZFRAC(36)=0.9
ZFRAC(37)=0.925 ;ZFRAC(38)=0.95
ZFRAC(39)=0.975 ;ZFRAC(40)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(3)=U1
NAME(7)=W1 ;NAME(148)=RHO1
NAME(149)=PRPS ;NAME(150)=OBID
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,Y,N,N,Y)
SOLUTN(U1,Y,Y,Y,N,N,Y)
SOLUTN(W1,Y,Y,Y,N,N,Y)
SOLUTN(RHO1,Y,N,N,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(OBID,Y,N,N,N,N,Y)
DEN1 = 148
PRPS = 149
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(U1,Y,Y,Y,Y,Y,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
DENPCO = T
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1. ;ENUT =0.
PRNDTL(U1)=1. ;PRNDTL(W1)=1.
PRT(U1)=1. ;PRT(W1)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
FIINIT(W1)=1.0E-10 ;FIINIT(RHO1)=1.0E-10
FIINIT(PRPS)=-1. ;FIINIT(OBID)=1.0E-10
PATCH(^OB5 ,INIVAL, 5, 0, 0, 0, 0, 0, 1, 1)
INIT(^OB5 ,PRPS,0. ,-1. )
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(RESIST ,VOLUME, 1, 40, 1, 1, 1, 40, 1, 20)
COVAL(RESIST ,U1 ,0. ,0. )
COVAL(RESIST ,W1 ,0. ,0. )
PATCH(LOWZ ,CELL , 1, 40, 1, 1, 1, 1, 1, 20)
COVAL(LOWZ ,P1 ,1. ,0. )
PATCH(HIGHZ ,CELL , 1, 40, 1, 1, 40, 40, 1, 20)
COVAL(HIGHZ ,P1 ,1. ,0. )
PATCH(LOWX ,CELL , 1, 1, 1, 1, 1, 40, 1, 20)
COVAL(LOWX ,P1 ,1. ,0. )
PATCH(HIGHX ,CELL , 40, 40, 1, 1, 1, 40, 1, 20)
COVAL(HIGHX ,P1 ,1. ,0. )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 150 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-02
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(U1)=10
LITER(W1)=10
ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
ENDIT(W1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,1.)
RELAX(U1,FALSDT,0.375)
RELAX(W1,FALSDT,0.375)
RELAX(RHO1,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
RELAX(OBID,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1. ;VARMIN(P1)=-1.
VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(RHO1)=1.0E+10 ;VARMIN(RHO1)=1.0E-02
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(OBID)=1.0E+10 ;VARMIN(OBID)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
CONWIZ = T
ISG52 = 2
ISG62 = 0
SPEDAT(SET,MOFOR,MOFFILE,C,NOTSET)
SPEDAT(SET,GXMONI,TRANSIENT,L,F)
SPEDAT(SET,PROPERTY,RHO1,C,=1.0+0.*P1)
SPEDAT(SET,PROPERTY,DRH1DP,C,=0.)
SPEDAT(SET,MOVOB,BOX,C,=POS(0.066667*TIM+(0.288885)&.0&0.066667*T$)
SPEDAT(SET,MOVOB,BOX,C,IM+(-0.403297)&0&-45.&0&0&0&0&0))
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,OBJNAM,^OB5,C,BOX)
SPEDAT(SET,OBJTYP,^OB5,C,BLOCKAGE)
SPEDAT(SET,BOX,MATERIAL,R,-1.)
SPEDAT(SET,FACETDAT,NUMOBJ,I,5)
************************************************************
Group 20. Preliminary Printout
DISTIL = T ;NULLPR = F
NDST = 0
DSTTOL =1.0E-02
EX(P1)=0.03187 ;EX(U1)=0.06612
EX(W1)=0.06623 ;EX(RHO1)=1.
EX(PRPS)=0. ;EX(OBID)=0.
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(U1,Y,N,Y,Y,Y,Y)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(RHO1,Y,N,Y,N,N,N)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(OBID,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 11 ;IYMON = 1 ;IZMON = 1
NPRMON = 150 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NTPRIN = 1 ;ISTPRF = 1 ;ISTPRL = 100000
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
IDISPA = 1 ;IDISPB = 0 ;IDISPC = 0
CSG1 ='P'
STOP