TALK=T;RUN(1,1)
  PHOTON USE
  p
  parphi




  msg                        TURBULENT ROUND JET
  msg
  msg        Velocity vectors:
  vec x 1 sh
  msg            -
  msg Press  to continue
  pause
  vec off;red
  msg        Axial velocity contours:
  con wcrt x 1 fi; 0.01
  msg            -
  msg Press  to continue
  pause
  con off;red
  msg        Temperature contours:
  con temp x 1 fi;0.01
  msg
  msg Press  to continue
  pause
  con off;red
  msg        eddy-viscosity (enut) contours:
  con enut x 1 fi;0.01
  msg
  msg Press e to END
  enduse
  DISPLAY
  The axi-symmetrical turbulent jet in stagnant surroundings is
  considered. This becomes "self-similar" after an initial
  development length, with the centre-line velocity and temperature
  difference varying as the reciprocal of the longitudinal distance.

  In case 153, the Prandtl Mixing-Length model is used, with the
  mixing length proportional to the distance across the jet.

  In case 154, the Prandtl Energy model is used, with the same
  presumption about the length scale.

  In case 155, the k-epsilon model is used, so that no length-scale
  presumption is needed.

  A PHOTON USE file is supplied
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Round Jet; K-E Turbu Model; Parab       )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 154
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = F
 NX = 1
 XULAST =0.1
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 20
 YVLAST =0.1
 AZYV =1. ;AZRI =0. ;AZAL =0.
   Method of pairs used for grid setting.
 YFRAC(2)=0.05
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = T
 NZ = 100
 ZWADD =0.400962
 ZWLAST =1.
 AZDZ = GRND2
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(5)=V1
 NAME(7)=W1 ;NAME(12)=KE
 NAME(13)=EP ;NAME(14)=TEMP
 NAME(148)=EPKE ;NAME(149)=LEN1
 NAME(150)=ENUT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(KE,Y,Y,N,N,N,Y)
 SOLUTN(EP,Y,Y,N,N,N,Y)
 SOLUTN(TEMP,Y,Y,N,N,N,Y)
 SOLUTN(EPKE,Y,N,N,N,N,N)
 SOLUTN(LEN1,Y,N,N,N,N,Y)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 VIST = 150
 LEN1 = 149
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(KE,Y,Y,Y,Y,Y,Y)
 TERMS(EP,Y,Y,Y,Y,N,Y)
 TERMS(TEMP,N,Y,Y,Y,Y,Y)
 DIFCUT =0. ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWENT = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 = GRND4
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 EL1A =0.05 ;EL1B =0.075 ;EL1C =1.0E-02
 EL1D =0. ;EL1E =10.
 ENUL =2.0E-06 ;ENUT = GRND3
 ENUTA =0. ;ENUTB =0. ;ENUTC =0.
 IENUTA = 0
 PRNDTL(V1)=1. ;PRNDTL(W1)=1.
 PRNDTL(KE)=1. ;PRNDTL(EP)=1.
 PRNDTL(TEMP)=1.
 PRT(V1)=1. ;PRT(W1)=1.
 PRT(KE)=1. ;PRT(EP)=1.314
 PRT(TEMP)=0.7
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(W1)=1.0E-10 ;FIINIT(KE)=1.0E-10
 FIINIT(EP)=1.0E-10 ;FIINIT(TEMP)=1.0E-10
 FIINIT(EPKE)=1.0E-10 ;FIINIT(LEN1)=1.0E-10
 FIINIT(ENUT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(HIGHY ,NORTH , 1, 1, 20, 20, 1, 100, 1, 1)
 COVAL(HIGHY ,P1 ,1.0E+04 ,0. )
 COVAL(HIGHY ,V1 ,0. ,0. )
 COVAL(HIGHY ,W1 ,0. ,0. )
 COVAL(HIGHY ,KE ,0. ,1.0E-10 )
 COVAL(HIGHY ,EP ,0. ,1.0E-06 )
 COVAL(HIGHY ,TEMP,0. ,0. )
 
 PATCH(NOZZLE ,LOW , 1, 1, 1, 10, 1, 1, 1, 1)
 COVAL(NOZZLE ,P1 , FIXFLU ,10. )
 COVAL(NOZZLE ,W1 ,0. ,10. )
 COVAL(NOZZLE ,KE ,0. ,1.0E-02 )
 COVAL(NOZZLE ,EP ,0. ,0.046943 )
 COVAL(NOZZLE ,TEMP,0. ,1. )
 
 PATCH(KESO ,PHASEM, 1, 1, 1, 20, 1, 100, 1, 1)
 COVAL(KESO ,KE , GRND4 , GRND4 )
 COVAL(KESO ,EP , GRND4 , GRND4 )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 IPARAB = 1
 AZPH =0. ;PBAR =0.
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 1 ;ISWC1 = 1
 LITHYD = 25 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-02
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(W1)=10 ;LITER(KE)=20
 LITER(EP)=20 ;LITER(TEMP)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(W1)=1.0E-03 ;ENDIT(KE)=1.0E-03
 ENDIT(EP)=1.0E-03 ;ENDIT(TEMP)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(V1,FALSDT,10.)
 RELAX(W1,FALSDT,10.)
 RELAX(KE,LINRLX,0.5)
 RELAX(EP,LINRLX,0.5)
 RELAX(TEMP,FALSDT,10.)
 RELAX(EPKE,LINRLX,1.)
 RELAX(LEN1,LINRLX,1.)
 RELAX(ENUT,LINRLX,0.5)
 KELIN = 3
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1000. ;VARMIN(V1)=-1000.
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
 VARMAX(EP)=1.0E+10 ;VARMIN(EP)=1.0E-10
 VARMAX(TEMP)=1.0E+10 ;VARMIN(TEMP)=-1.0E+10
 VARMAX(EPKE)=1.0E+10 ;VARMIN(EPKE)=-1.0E+10
 VARMAX(LEN1)=1.0E+10 ;VARMIN(LEN1)=-1.0E+10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 DWDY = T
 PARSOL = F
 DZW1 =0.1
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(KE,Y,Y,Y,N,Y,Y)
 OUTPUT(EP,Y,Y,Y,N,Y,Y)
 OUTPUT(TEMP,Y,N,Y,Y,Y,Y)
 OUTPUT(EPKE,Y,N,Y,N,N,N)
 OUTPUT(LEN1,Y,N,Y,N,N,N)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 10 ;IZMON = 50
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -5
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = 2 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = 100 ;IZPRF = 1 ;IZPRL = 10000
 IPLTF = 1 ;IPLTL = 25 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 1 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(IZEQNZ ,PROFIL, 1, 1, 1, 20, 100, 100, 1, 1)
 PLOT(IZEQNZ ,W1 ,0. ,0. )
 PLOT(IZEQNZ ,KE ,0. ,0. )
 PLOT(IZEQNZ ,TEMP,0. ,0. )
 PLOT(IZEQNZ ,ENUT,0. ,0. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
 IDISPA = 1 ;IDISPB = 0 ;IDISPC = 0
STOP