TALK=T;RUN(1,1)
PHOTON USE
p;; 10 1;;;
set prop off;vi -x
msg temperature contours and velocity vectors
msg Note that the y-scale has been magnified 10 times
con tem1 x 1 fi;0.001
vec x 1
ENDUSE
DISPLAY
Water flows steadily through a thick-walled aluminium pipe.
A constant heat flux is prescribed at the outer wall, while
uniform temperature and velocity profiles are prescribed at
the pipe inlet.
Thick metal pipe wall
|
^ .-----.-------------------------.
| /***.-.***\ \
|r /**/ \**\ \
Fixed | |**|---> |**| |->
mass flux |**|---> |**| |->
at pipe \**\ /**/ /
inlet \***`-'***/ /
boundary `-----'-------------------------'
| z---->
Fixed heat flux
at outer surface
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************
TEXT(Case 123 With Mercury, Not Water )
************************************************************
************************************************************
IRUNN = 1 ;LIBREF = 123
************************************************************
Group 2. Time dependence
STEADY = T
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = F
NX = 1
XULAST =1.0E-02
XFRAC(1)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 30
YVLAST =0.015
Method of pairs used for grid setting.
YFRAC(1)=-20. ;YFRAC(2)=0.033333
YFRAC(3)=10. ;YFRAC(4)=0.016667
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 20
ZWLAST =0.3
ZFRAC(1)=0.05 ;ZFRAC(2)=0.1
ZFRAC(3)=0.15 ;ZFRAC(4)=0.2
ZFRAC(5)=0.25 ;ZFRAC(6)=0.3
ZFRAC(7)=0.35 ;ZFRAC(8)=0.4
ZFRAC(9)=0.45 ;ZFRAC(10)=0.5
ZFRAC(11)=0.55 ;ZFRAC(12)=0.6
ZFRAC(13)=0.65 ;ZFRAC(14)=0.7
ZFRAC(15)=0.75 ;ZFRAC(16)=0.8
ZFRAC(17)=0.85 ;ZFRAC(18)=0.9
ZFRAC(19)=0.95 ;ZFRAC(20)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(5)=V1
NAME(7)=W1 ;NAME(149)=PRPS
NAME(150)=TEM1
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,Y,N,N,Y)
SOLUTN(V1,Y,Y,Y,N,N,Y)
SOLUTN(W1,Y,Y,Y,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(TEM1,Y,Y,Y,N,N,Y)
PRPS = 149
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
TERMS(TEM1,N,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0. ;EL1 =0.
TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
RADIA =0. ;RADIB =0.
ENUL =1.0E-05 ;ENUT =0.
PRNDTL(V1)=1. ;PRNDTL(W1)=1.
PRNDTL(TEM1)=1.
PRT(V1)=1. ;PRT(W1)=1.
PRT(TEM1)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
FIINIT(W1)=0.1 ;FIINIT(PRPS)=66.
FIINIT(TEM1)=1.0E-10
PATCH(METAL ,INIVAL, 1, 1, 21, 30, 1, 20, 1, 1)
INIT(METAL ,PRPS,0. ,100. )
INIADD = F
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources
PATCH(IN ,LOW , 1, 1, 1, 20, 1, 1, 1, 1)
COVAL(IN ,P1 , FIXFLU ,1353. )
COVAL(IN ,W1 ,0. ,0.1 )
COVAL(IN ,TEM1,0. ,20. )
PATCH(OUTER ,NORTH , 1, 1, 30, 30, 1, 20, 1, 1)
COVAL(OUTER ,TEM1, FIXFLU ,1000. )
PATCH(EXIT ,HIGH , 1, 1, 1, 20, 20, 20, 1, 1)
COVAL(EXIT ,P1 , FIXVAL ,0. )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 200 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-04
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(V1)=10
LITER(W1)=10 ;LITER(TEM1)=20
ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
ENDIT(W1)=1.0E-03 ;ENDIT(TEM1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,0.4)
RELAX(V1,FALSDT,3.)
RELAX(W1,FALSDT,3.)
RELAX(PRPS,LINRLX,1.)
RELAX(TEM1,FALSDT,1.0E+09)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,GXMONI,PLOTALL,L,T)
SPEDAT(SET,MATERIAL,66,L,T)
SPEDAT(SET,MATERIAL,100,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,Y,Y,Y,Y,Y)
OUTPUT(V1,Y,Y,Y,Y,Y,Y)
OUTPUT(W1,Y,Y,Y,Y,Y,Y)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 19 ;IZMON = 19
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
PATCH(OUTSIDE ,PROFIL, 1, 1, 30, 30, 1, 20, 1, 1)
PLOT(OUTSIDE ,TEM1,0. ,0. )
PATCH(WNEARM ,PROFIL, 1, 1, 20, 20, 1, 20, 1, 1)
PLOT(WNEARM ,W1 ,0. ,0. )
PLOT(WNEARM ,TEM1,0. ,0. )
PATCH(NEAREND ,PROFIL, 1, 1, 1, 30, 19, 19, 1, 1)
PLOT(NEAREND ,W1 ,0. ,0. )
PLOT(NEAREND ,TEM1,0. ,0. )
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP